Novel oxidative routes to N-arylpyridoindazolium salts

• Oleg A. Levitskiy,
• Yuri K. Grishin and
• Tatiana V. Magdesieva

Beilstein J. Org. Chem. 2024, 20, 1906–1913, doi:10.3762/bjoc.20.166

• reported as substrates for nucleophilic substitutions using potassium fluoride [22]. The study is in progress now. Voltammetry characterization of the N-arylpyridoindazolium salts S1–S3 and their precursors, diarylamines A1–A3 The electrochemical investigation of the new salts was performed at a Pt

The Groebke–Blackburn–Bienaymé reaction in its maturity: innovation and improvements since its 21st birthday (2019–2023)

• Cristina Martini,
• Muhammad Idham Darussalam Mardjan and
• Andrea Basso

Beilstein J. Org. Chem. 2024, 20, 1839–1879, doi:10.3762/bjoc.20.162

• potassium carbonate was almost quantitative (97–99% yield). It is worth mentioning that the GBB reaction starting from the deacetylated substrate also leads to good results (83–91% of yield), but the overall yield is lowered due to a sluggish deacetylation reaction of 29. Sugar-based aldehydes were employed

Chiral bifunctional sulfide-catalyzed enantioselective bromolactonizations of α- and β-substituted 5-hexenoic acids

• Sao Sumida,
• Ken Okuno,
• Taiki Mori,
• Yasuaki Furuya and
• Seiji Shirakawa

Beilstein J. Org. Chem. 2024, 20, 1794–1799, doi:10.3762/bjoc.20.158

• -valerolactones 7 and 8, which are functionalized with sulfur and nitrogen, in high yields. Additionally, optically active δ-valerolactone 3a was converted to optically active epoxy-ester 9 upon treatment with potassium carbonate in methanol. Notably, the transformed products were obtained without any loss of

Oxidative fluorination with Selectfluor: A convenient procedure for preparing hypervalent iodine(V) fluorides

• Samuel M. G. Dearman,
• Xiang Li,
• Yang Li,
• Kuldip Singh and
• Alison M. Stuart

Beilstein J. Org. Chem. 2024, 20, 1785–1793, doi:10.3762/bjoc.20.157

• such as 5 (Scheme 2D) using large excesses of trichloroisocyanuric acid (TCCA) and potassium fluoride [24]. The iodine(V) fluorides were formed in good spectroscopic yields (79–94%), but only one product, tetrafluoro(4-fluorophenyl)-λ5-iodane 5, was isolated from the reaction mixture by performing

• iodine(I) precursor 8 (Table 1). Reacting 8 with 4 equivalents of trichloroisocyanuric acid (TCCA) and 6 equivalents of potassium fluoride in dry acetonitrile at 40 °C for 48 hours formed difluoroiodane 6 in a 90% spectroscopic yield (Table 1, entry 1). An iodosyl decomposition product 9 was also formed

Synthesis of polycyclic aromatic quinones by continuous flow electrochemical oxidation: anodic methoxylation of polycyclic aromatic phenols (PAPs)

• Hiwot M. Tiruye,
• Solon Economopoulos and
• Kåre B. Jørgensen

Beilstein J. Org. Chem. 2024, 20, 1746–1757, doi:10.3762/bjoc.20.153

• radical (potassium nitrosodisulfonate) [13] or catalytic systems like methyltrioxorhenium(VII) (MeReO3) [14] and 2-iodobenzenesulfonic acids (IBS)/Oxone® [15] led to either p-quinones or o-quinones, depending on the substituents in the para-position to the hydroxy group. Recently, hypervalent iodine

Syntheses and medicinal chemistry of spiro heterocyclic steroids

• Laura L. Romero-Hernández,
• Ana Isabel Ahuja-Casarín,
• Penélope Merino-Montiel,
• Sara Montiel-Smith,
• José Luis Vega-Báez and
• Jesús Sandoval-Ramírez

Beilstein J. Org. Chem. 2024, 20, 1713–1745, doi:10.3762/bjoc.20.152

• process, the carbonyl group at C-17 was stereoselectively attacked by α-lithio-α-methoxyallene at −78 °C to produce allene 25. A further cyclization reaction was induced by potassium tert-butoxide in the presence of catalytic dicyclohexyl-18-crown-6. The final 17-spirodihydro-(2H)-furan-3-one 27 was

• out, resulting in the corresponding N-tosylhydrazones 51a–c. Afterwards, the compounds were subjected to microwave irradiation in the presence of (3-azidopropyl)boronic acid and potassium or cesium carbonate, yielding 3-spiropyrrolidines 52a–c in high overall yields as 1:1 mixture of diastereomers

• an aldol condensation with benzaldehyde using potassium hydroxide in refluxing ethanol. The resulting enone 139 was reduced with sodium borohydride in methanol to give diastereoselectively the 17β-allylic alcohol. A successive treatment with m-CPBA in dichloromethane provided a mixture of epoxides

A fiber-optic spectroscopic setup for isomerization quantum yield determination

• Anouk Volker,
• Jorn D. Steen and
• Stefano Crespi

Beilstein J. Org. Chem. 2024, 20, 1684–1692, doi:10.3762/bjoc.20.150

• photon flux, i.e., the number of photons impinging a unit area of the sample in a unit of time [10]. Potassium ferrioxalate [39][40] is one of the most used actinometers while also some azobenzene derivatives have been reported as reaction quantum yield standards [11][22]. Although new chemical

Methyltransferases from RiPP pathways: shaping the landscape of natural product chemistry

• Maria-Paula Schröder,
• Isabel P.-M. Pfeiffer and
• Silja Mordhorst

Beilstein J. Org. Chem. 2024, 20, 1652–1670, doi:10.3762/bjoc.20.147

• . Additionally, stereoselectivity can be achieved by using potassium bis(trimethylsilyl)amide for deprotonation and methylation with MeI [33][39]. Any of these routes would yield methylated amino acids that can then be incorporated into an oligopeptide in solid-phase peptide synthesis (SPPS). Additionally, N

Benzylic C(sp³)–H fluorination

• Alexander P. Atkins,
• Alice C. Dean and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 1527–1547, doi:10.3762/bjoc.20.137

• -oxyl radicals from NDHPI (Figure 17) [58]. The secondary and tertiary substrates selected were shown to undergo this transformation in moderate to good yields. The Yi group published a complementary method using stoichiometric potassium persulfate as the HAT reagent precursor (Figure 18) [59]. The

• yields quoted vs copper catalyst. Iron-catalysed intramolecular fluorine-atom-transfer from N–F amides. Vanadium-catalysed benzylic fluorination with Selectfluor. NDHPI-catalysed radical benzylic C(sp3)–H fluorination with Selectfluor. Potassium persulfate-mediated radical benzylic C(sp3)–H fluorination

Domino reactions of chromones with activated carbonyl compounds

• Peter Langer

Beilstein J. Org. Chem. 2024, 20, 1256–1269, doi:10.3762/bjoc.20.108

• explained by a better solubility. For the other substituents of the chromone, no clear trend was observed. Product 29c underwent cleavage of the perfluoroalkyl group upon treatment with potassium hydroxide in methanol to give benzocoumarine 30. 1,3-Bis(silyloxy)-1,3-butadienes The reaction of 3

• attack of the sulfur to the bromide (intermediate AC) and subsequent ring-cleavage. In most reactions, DBU was employed as the base. In case of products derived from N-unsubstititued 3H-indole-2-thiones (R3 = H), employment of potassium carbonate proved to be advantageous. Similarly to the formation of

Competing electrophilic substitution and oxidative polymerization of arylamines with selenium dioxide

• Vishnu Selladurai and
• Selvakumar Karuthapandi

Beilstein J. Org. Chem. 2024, 20, 1221–1235, doi:10.3762/bjoc.20.105

• , regioselective aromatic electrophilic substitution is often difficult. Various synthetic strategies have evolved to address such problems and expand the scope of SeO2 beyond the oxidizing capability. Ren et al. adopted potassium-iodide-mediated catalytic selenation of aromatic compounds using SeO2 (Scheme 1) [33

• signal at m/z 518.8590, corresponding to the 2:1 potassium complex [2M + K]+ (Figure S7, Supporting Information File 1). Reaction of o-anisidine with SeO2 To further understand the competitive process, we extended the reaction to o-anisidine with an electron-donating methoxy group in an ortho position

Manganese-catalyzed C–C and C–N bond formation with alcohols via borrowing hydrogen or hydrogen auto-transfer

• Mohd Farhan Ansari,
• Atul Kumar Maurya,
• Abhishek Kumar and
• Saravanakumar Elangovan

Beilstein J. Org. Chem. 2024, 20, 1111–1166, doi:10.3762/bjoc.20.98

• indicates that the cation-coordinative interaction with the catalyst plays a significant role. Moreover, the mechanistic investigation suggested that the observed selectivity is due to the more reactive potassium manganate hydride towards the hydrogenation of imines to amines than the sodium manganate

Structure–property relationships in dicyanopyrazinoquinoxalines and their hydrogen-bonding-capable dihydropyrazinoquinoxalinedione derivatives

• Tural N. Akhmedov,
• Ajeet Kumar,
• Daken J. Starkenburg,
• Kyle J. Chesney,
• Khalil A. Abboud,
• Novruz G. Akhmedov,
• Jiangeng Xue and
• Ronald K. Castellano

Beilstein J. Org. Chem. 2024, 20, 1037–1052, doi:10.3762/bjoc.20.92

• -bonding dicyanopyrazinoquinoxaline (DCPQ) suspensions with excess potassium hydroxide, resulting in moderate to good yields. Both families of compounds were analyzed by UV–vis and NMR spectroscopy, where the consequences of hydrogen bonding capability could be assessed through the structure–property

• ). Subsequently, a solution of potassium hydroxide in water (15 mL) was added dropwise at room temperature, resulting in a color change from orange to red. The reaction mixture stirred for 72 hours, resulted in the formation of an orange-brown precipitate. The reaction mixture was then filtered, and 1 N HCl was

Spin and charge interactions between nanographene host and ferrocene

• Akira Suzuki,
• Yuya Miyake,
• Ryoga Shibata and
• Kazuyuki Takai

Beilstein J. Org. Chem. 2024, 20, 1011–1019, doi:10.3762/bjoc.20.89

• with localized spins of unpaired electrons [6]. Thus, it is interesting to introduce a magnetic guest molecule into a magnetic nanographene host regarding the development of a new class of magnetic materials. Oxygen [7][8][9][10][11], nitrogen monoxide molecules [12][13], and potassium clusters having

SOMOphilic alkyne vs radical-polar crossover approaches: The full story of the azido-alkynylation of alkenes

• Julien Borrel and
• Jerome Waser

Beilstein J. Org. Chem. 2024, 20, 701–713, doi:10.3762/bjoc.20.64

• potassium to tetrabutylammonium (7) reduced the yield to 14% (Scheme 2A). When TMS-alkyne 8 was used, no product formation occurred. In this case, we observed that the initial reaction mixture before light irradiation was colorless. This was surprising, as in all the previous experiments a yellow/orange

• obtained in 54% yield. The reaction could be extended to alkyl-substituted alkynes with little difference in yields. An homopropargylic azides possessing a cyclopropyl (4t) was formed in 52% yield. Finally, starting from potassium ethynyltrifluoroborate the free alkyne 4u could be accessed in 34% yield

Palladium-catalyzed three-component radical-polar crossover carboamination of 1,3-dienes or allenes with diazo esters and amines

• Geng-Xin Liu,
• Xiao-Ting Jie,
• Ge-Jun Niu,
• Li-Sheng Yang,
• Xing-Lin Li,
• Jian Luo and
• Wen-Hao Hu

Beilstein J. Org. Chem. 2024, 20, 661–671, doi:10.3762/bjoc.20.59

• (Table 1, entry 7), whereas only low yields of 4a were observed with Pd(0) catalysts Pd(PPh3)4 and Pd2(dba)3 (Table 1, entries 8 and 9). Moreover, adding potassium carbonate as additive failed to furnish 4a, demonstrating that the trace amount of acid from the Pd(II) catalyst may facilitate the formation

Synthesis and biological profile of 2,3-dihydro[1,3]thiazolo[4,5-b]pyridines, a novel class of acyl-ACP thioesterase inhibitors

• Jens Frackenpohl,
• David M. Barber,
• Guido Bojack,
• Birgit Bollenbach-Wahl,
• Ralf Braun,
• Rahel Getachew,
• Sabine Hohmann,
• Kwang-Yoon Ko,
• Karoline Kurowski,
• Bernd Laber,
• Rebecca L. Mattison,
• Thomas Müller,
• Anna M. Reingruber,
• Dirk Schmutzler and
• Andrea Svejda

Beilstein J. Org. Chem. 2024, 20, 540–551, doi:10.3762/bjoc.20.46

• quantities of the most active compounds for advanced biological testing. Pleasingly, our four-step approach using a potassium O-ethyl dithiocarbonate-mediated formation of thio intermediates 11a–c (thiol–thione tautomers) with subsequent sulfur removal using iron powder in acetic acid [19] proceeded smoothly

• ) 7.92 (s, 1H), 7.44–7.33 (m, 2H), 7.25–7.20 (m, 1H), 7.17–7.12 (m, 1H), 5.07–4.98 (br s, 2H, NH2). To a stirred solution of 3,5-dibromo-6-(2-fluorophenyl)pyridin-2-ylamine (10b, 17.62 g, 50.93 mmol, 1.0 equiv) in DMF (120 mL) at room temperature was added potassium O-ethyl dithiocarbonate (18.52 g

• -(2-fluorophenyl)[1,3]thiazolo[4,5-b]pyridine (12b, 1.88 g, 4.56 mmol, 1.0 equiv), methylboronic acid (1.13 g, 18.24 mmol, 4.0 equiv), potassium phosphate (1.94 g, 9.12 mmol, 2.0 equiv), palladium(II) acetate (103 mg, 0.46 mmol, 0.1 equiv), and 2-dicyclohexylphosphino-2’,6’-dimethoxybiphenyl (579 mg

Switchable molecular tweezers: design and applications

• Pablo Msellem,
• Maksym Dekthiarenko,
• Nihal Hadj Seyd and
• Guillaume Vives

Beilstein J. Org. Chem. 2024, 20, 504–539, doi:10.3762/bjoc.20.45

• efficient quenching using KI instead of NaI to the better size affinity of the podand with potassium. Even though this system seemed promising, podand-based molecular tweezers have not attracted much interest for switchable molecular tweezers design until the work of Fan and co-workers in 2014 [67]. They

(E,Z)-1,1,1,4,4,4-Hexafluorobut-2-enes: hydrofluoroolefins halogenation/dehydrohalogenation cascade to reach new fluorinated allene

• Nataliia V. Kirij,
• Andrey A. Filatov,
• Yurii L. Yagupolskii,
• Sheng Peng and
• Lee Sprague

Beilstein J. Org. Chem. 2024, 20, 452–459, doi:10.3762/bjoc.20.40

• oxirane [14]. A related study has demonstrated that (E)-butene 1a reacts with potassium persulfate to form 4,5-bistrifluoromethyl)-1,3,2-dioxathiolane 2,2-dioxide [15]. In 2021 Petrov published an article on the interaction of fluorinated olefins with fluorinated thioketones. In this publication it was

• )-1,1,1,4,4,4-hexafluorobut-2-ene (1a) under UV irradiation leads to the formation of 2,3-dibromo-1,1,1,4,4,4-hexafluorobutane (2) [1]. Subsequent dehydrobromination of compound 2 by treatment with alcoholic potassium hydroxide formed a mixture of isomers 2-bromo-1,1,1,4,4,4-hexafluorobut-2-ene (3a,b) with a

• of stereoisomers in 2:1 ratio. After isolation by distillation, 2,3-dibromo-1,1,1,4,4,4-hexafluorobutane (2) was characterized by 1H, 19F, 13C NMR and mass spectra. We studied the reaction of dibromoalkane 2 with various bases such as DBU, Hünig’s base (iPr2NEt), and potassium hydroxide (Table 1). In

Synthesis of π-conjugated polycyclic compounds by late-stage extrusion of chalcogen fragments

• Aissam Okba,
• Pablo Simón Marqués,
• Kyohei Matsuo,
• Naoki Aratani,
• Hiroko Yamada,
• Gwénaël Rapenne and
• Claire Kammerer

Beilstein J. Org. Chem. 2024, 20, 287–305, doi:10.3762/bjoc.20.30

• derivative 21 was synthesized in six steps in 14% overall yield from 3-bromothiophene (17, Scheme 7). In the first step, the sulfur atom embedded in the final thiepine ring was introduced via a palladium-catalyzed S-arylation of 3-bromothiophene in the presence of potassium thioacetate, to afford the

Substitution reactions in the acenaphthene analog of quino[7,8-h]quinoline and an unusual synthesis of the corresponding acenaphthylenes by tele-elimination

• Ekaterina V. Kolupaeva,
• Narek A. Dzhangiryan,
• Alexander F. Pozharskii,
• Oleg P. Demidov and
• Valery A. Ozeryanskii

Beilstein J. Org. Chem. 2024, 20, 243–253, doi:10.3762/bjoc.20.24

• with a potassium hydroxide solution, and the oxidation product was isolated by chromatography. Nitroacenaphthylene 13 can also be obtained similarly (Scheme 5). Thus, although nitro groups usually hinder the dehydrogenation of acenaphthenes, in our case, the opposite trend is observed. We believe that

Chiral phosphoric acid-catalyzed transfer hydrogenation of 3,3-difluoro-3H-indoles

• Yumei Wang,
• Guangzhu Wang,
• Yanping Zhu and
• Kaiwu Dong

Beilstein J. Org. Chem. 2024, 20, 205–211, doi:10.3762/bjoc.20.20

• increase drug activity by affecting drug receptor interactions [1]. Therefore, replacing hydrogen with one or more fluoro atoms has beneficial effects on therapeutic efficacy and pharmacological activity [2]. For example, flindokalner is a potassium channel opener (Figure 1) [3]. JAB-3068 is a promising

Synthesis of N-acyl carbazoles, phenoxazines and acridines from cyclic diaryliodonium salts

• Nils Clamor,
• Mattis Damrath,
• Thomas J. Kuczmera,
• Daniel Duvinage and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2024, 20, 12–16, doi:10.3762/bjoc.20.2

• (I) source resulted in a complete collapse of reactivity. In a further experiment, we investigated the influence of iodide on the reaction to confirm whether or not diiodobiphenyl plays a role as an intermediate. The addition of potassium iodide leads to only diiodobiphenyl as the product. To confirm

Aldiminium and 1,2,3-triazolium dithiocarboxylate zwitterions derived from cyclic (alkyl)(amino) and mesoionic carbenes

• Nedra Touj,
• François Mazars,
• Guillermo Zaragoza and
• Lionel Delaude

Beilstein J. Org. Chem. 2023, 19, 1947–1956, doi:10.3762/bjoc.19.145

• NHC·CS2 zwitterions relies on the deprotonation of an azolium salt with a strong base, typically potassium tert-butoxide or potassium bis(trimethylsilyl)amide (also known as potassium hexamethyldisilazide, KHMDS) followed by the addition of carbon disulfide either in one pot or after the isolation of the

• equiv) in THF at 0 °C. The potassium iodide byproduct was filtered off and carbon disulfide (3.3 equiv) was added to the carbene solution leading to an immediate color change. After 30 min at room temperature, the solvent was evaporated under vacuum. The residue was washed with petroleum ether and dried

• acetonitrile (Scheme 4). However, all our attempts to purify compounds 6c–f by recrystallization or column chromatography remained unsuccessful. Several studies have shown that metal alkoxides, such as potassium tert-butoxide (pKa = 22), were basic enough to deprotonate 1,2,3-triazolium salts (pKa ≈ 22–23

Aromatic systems with two and three pyridine-2,6-dicarbazolyl-3,5-dicarbonitrile fragments as electron-transporting organic semiconductors exhibiting long-lived emissions

• Karolis Leitonas,
• Brigita Vigante,
• Dmytro Volyniuk,
• Audrius Bucinskas,
• Pavels Dimitrijevs,
• Sindija Lapcinska,
• Pavel Arsenyan and
• Juozas Vidas Grazulevicius

Beilstein J. Org. Chem. 2023, 19, 1867–1880, doi:10.3762/bjoc.19.139

• copper(I) iodide in DMF/DIPEA solution at 55 °C with subsequent desilylation with potassium carbonate. Finally, butadiyne 6 was prepared by a homocoupling reaction of 5 with 80% yield. Derivatives containing two dicyanopyridyl moieties, 7 and 8, were prepared starting with a Sonogashira coupling of

• , 129.64, 127.20, 125.71, 124.18, 116.57, 114.00, 112.34, 103.64, 99.21, 98.30, 34.90, 31.81; MS–ESI+ (m/z): 856 ([M + H]+, 100). Next, potassium carbonate (69 mg, 0.5 mmol, 1 equiv) was added to a solution of 2,6-bis-(3,6-di-tert-butyl-9H-carbazol-9-yl)-4-(4-(trimethylsilylethynyl)phenyl)pyridine-3,5