Germanyl triazoles as a platform for CuAAC diversification and chemoselective orthogonal cross-coupling

• John M. Halford-McGuff,
• Thomas M. Richardson,
• Aidan P. McKay,
• Frederik Peschke,
• Glenn A. Burley and
• Allan J. B. Watson

Beilstein J. Org. Chem. 2024, 20, 3198–3204, doi:10.3762/bjoc.20.265

• 10.3762/bjoc.20.265 Abstract We report the synthesis of germanyl triazoles formed via a copper-catalysed azide–alkyne cycloaddition (CuAAC) of germanyl alkynes. The reaction is often high yielding, functional group tolerant, and compatible with complex molecules. The installation of the Ge moiety enables

• azide precursors and the formation of a single 1,4-disubstituted triazole product, the copper-catalysed azide–alkyne cycloaddition (CuAAC) remains the archetypal click reaction (Scheme 1) [5]. The reaction has shown applicability on small and large scale, as well as under flow conditions [6], and

5th International Symposium on Synthesis and Catalysis (ISySyCat2023)

• Anthony J. Burke and
• Elisabete P. Carreiro

Beilstein J. Org. Chem. 2024, 20, 2704–2707, doi:10.3762/bjoc.20.227

• in MeOH at room temperature with a short reaction time. Some of them were further functionalized with a 1,2,3-triazole ring via copper-catalyzed azide–alkyne cycloaddition (CuAAC) and deprotected with trifluoroacetic acid. Several hybrids were evaluated against six cancer cell lines, displaying GI50

Improved deconvolution of natural products’ protein targets using diagnostic ions from chemical proteomics linkers

• Andreas Wiest and
• Pavel Kielkowski

Beilstein J. Org. Chem. 2024, 20, 2323–2341, doi:10.3762/bjoc.20.199

• bearing an affinity or reporter tag. To carry out this bioorthogonal reaction well-known chemistries were developed including traceless Staudinger ligation, Cu-catalyzed azide–alkyne cycloaddition (CuAAC), strain-promoted azide–alkyne cycloaddition (SPAAC), inverse electron-demand Diels–Alder reaction

Metal-free double azide addition to strained alkynes of an octadehydrodibenzo[12]annulene derivative with electron-withdrawing substituents

• Naoki Takeda,
• Shuichi Akasaka,
• Susumu Kawauchi and
• Tsuyoshi Michinobu

Beilstein J. Org. Chem. 2024, 20, 2234–2241, doi:10.3762/bjoc.20.191

• Naoki Takeda Shuichi Akasaka Susumu Kawauchi Tsuyoshi Michinobu Department of Materials Science and Engineering, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8552, Japan 10.3762/bjoc.20.191 Abstract Strain-promoted azide–alkyne cycloaddition (SpAAC) is a powerful tool in

• azide–alkyne cycloaddition; Introduction The strain-promoted azide–alkyne cycloaddition (SpAAC) is one of the most representative metal-free click chemistry reactions [1][2][3][4][5]. SpAAC has been mainly employed in bioconjugation in the fields of chemical biology and medicinal chemistry due to its

• , the double azide addition reaction was applied to polymer crosslinking and the mechanical properties of the self-standing polymer films were compared. Results and Discussion Strain-promoted azide–alkyne cycloaddition Octadehydrodibenzo[12]annulene (DBA) with electron-withdrawing carbonyl substituents

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

• to 97%. The Sonogashira coupling can also be effectively integrated with the CuAAC (copper-catalyzed azide–alkyne cycloaddition) reaction, offering a powerful tool for synthesizing diverse molecular architectures. In a consecutive multicomponent reaction, pyrazoles were first presented in a

Synthesis of substituted triazole–pyrazole hybrids using triazenylpyrazole precursors

• Simone Gräßle,
• Laura Holzhauer,
• Nicolai Wippert,
• Olaf Fuhr,
• Martin Nieger,
• Nicole Jung and
• Stefan Bräse

Beilstein J. Org. Chem. 2024, 20, 1396–1404, doi:10.3762/bjoc.20.121

• the triazole unit via a copper-catalyzed azide–alkyne cycloaddition. The developed methodology was used to synthesize a library of over fifty new multi-substituted pyrazole–triazole hybrids. We also demonstrate a one-pot strategy that renders the isolation of potentially hazardous azides obsolete. In

• cholerae [13], show antimicrobial properties [14], and can act as P2X7 antagonists, a receptor involved in neuroinflammation and depression [15]. Pyrazolyltriazoles are most easily obtained via the copper-catalyzed azide–alkyne cycloaddition (CuAAC) from pyrazolyl azides (7 and 8). These are usually

• aromatic and aliphatic alkynes 20a–h in a copper-catalyzed azide–alkyne cycloaddition (CuAAC). All attempted reactions could be conducted under standard conditions using copper sulfate and sodium ascorbate in THF/water (depicted in Scheme 3 and Figure 2). For selected derivatives, 21sd and 21vg, crystals

The Ugi4CR as effective tool to access promising anticancer isatin-based α-acetamide carboxamide oxindole hybrids

• Carolina S. Marques,
• Aday González-Bakker and
• José M. Padrón

Beilstein J. Org. Chem. 2024, 20, 1213–1220, doi:10.3762/bjoc.20.104

• and Figure 2). Like the oxindole scaffold, 1,2,3-triazole is also considered a privileged unit in drug discovery since compounds having this structure have a broad spectrum of biological activities, and have been widely used to create anticancer drug candidates [24][25]. The copper-catalyzed azide

• –alkyne cycloaddition (CuAAC) reaction, or commonly entitled “click” reaction, is a widely and straightforward tool to access the 1,2,3-triazole ring [26][27]. Due to the presence of an alkyne group on the Ugi-adduct 5bb (Scheme 2) we decided to use the CuAAC reaction to introduce a 1,2,3-triazole unit

Development of a chemical scaffold for inhibiting nonribosomal peptide synthetases in live bacterial cells

• Fumihiro Ishikawa,
• Sho Konno,
• Hideaki Kakeya and
• Genzoh Tanabe

Beilstein J. Org. Chem. 2024, 20, 445–451, doi:10.3762/bjoc.20.39

• benzophenone moiety in probe 3. The samples were then reacted with TAMRA-N3 (structure shown in Figure S4, Supporting Information File 1) under copper(I)-catalyzed azide–alkyne cycloaddition conditions [21] and subjected to sodium dodecyl sulfate-polyacrylamide gel electrophoresis coupled with in-gel

• are treated with a TAMRA-N3 under copper(I)-catalyzed azide–alkyne cycloaddition conditions, followed by SDS-PAGE coupled with in-gel fluorescence scanning. AMS, 5′-O-sulfamoyladenosine. Competitive labeling experiments of GrsA using probe 3 in the presence of ʟ-Phe-AMS inhibitors. (A) Labeling of

Perspectives on push–pull chromophores derived from click-type [2 + 2] cycloaddition–retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

• Michio Yamada

Beilstein J. Org. Chem. 2024, 20, 125–154, doi:10.3762/bjoc.20.13

• wormlike nanoparticles. In rotaxanes, the utilization of metal–ligand bonding involving CuI is a common strategy for immobilizing a thread moiety within a macrocycle. However, the efficacy of such a bonding is compromised when catalysts are used in stoppering reactions, e.g., the copper-catalyzed azide

• –alkyne cycloaddition reaction. Consequently, a [2 + 2] CA–RE reaction that can yield push–pull chromophores without the use of a catalyst is exceedingly valuable as a stoppering method, even for systems featuring metal–ligand bonding. Accordingly, Diederich et al. demonstrated the synthesis of a CuI bis

Morpholine-mediated defluorinative cycloaddition of gem-difluoroalkenes and organic azides

• Tzu-Yu Huang,
• Mario Djugovski,
• Sweta Adhikari,
• Destinee L. Manning and
• Sudeshna Roy

Beilstein J. Org. Chem. 2023, 19, 1545–1554, doi:10.3762/bjoc.19.111

• -promoted [22] azide–alkyne cycloaddition reactions [17][23][24]; however, most of these strategies use high temperatures [21][25]. Herein, we report the discovery of a novel, one-step regioselective method under mild conditions to obtain 1,4,5-trisubstituted-1,2,3-triazoles from gem-difluoroalkenes

• generated via an azide–alkyne cycloaddition or a multicomponent reaction between carbonyls and azides [17]. α-Trifluoromethyl (α-CF3) carbonyls were recently utilized to generate NH-1,2,3-triazoles and fully substituted 1,2,3-triazoles [28][29]. However, there are no reports of a formal [3 + 2

• –elimination of morpholine to gem-difluoroalkene 1 affording INT-1, which can generate product 3 via two routes (Figure 5). Route A entails the formation of an aminoalkyne intermediate, INT-2, which can participate in a [3 + 2] azide–alkyne cycloaddition to form the final product 3. Alternatively, vinylic

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• -donors on the catalytic activity of NHC–Cu(I) complexes for azide–alkyne [3 + 2] cycloaddition reactions [67]. They determined binding constants of four NHC–CuCl complexes with two N-donors, which revealed that addition of phenanthroline to the NHC–CuCl enhanced the catalytic activity manifold. In fact

• and co-workers [68] developed a new series of heteroleptic bis(NHC)–Cu(I) complexes and a mixed NHC–Cu–phosphine complex and employed these complexes as catalysts for azide–alkyne [3 + 2] cycloaddition (Scheme 50). These cationic heteroleptic bis(NHC)–Cu complexes 131 are highly active for this

• [Cu2(μBr)2(t-BuImCH2pyCH2L)]2 species 138 acting similar to the NHCs. A very low loading of these complexes was sufficient to catalyze the azide–alkyne cycloaddition. A theoretical investigation at the DFT level confirmed the participation of the dinuclear species [(CuBr)2(μ-t-BuImCH2pyCH2NEt2)] 139

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• of the synthesis and properties of various porphyrin-triazole hybrids, this review will discuss some of the key reactions involved in the preparation of triazole-linked porphyrin conjugates. Keywords: azide–alkyne; click chemistry; CuAAC; 1,3-dipolar cycloaddition; porphyrin; 1,2,3-triazole

• porphyrin 126 was accomplished in four steps as shown in Scheme 24. First, porphyrin 123 was obtained by zinc metalation of the free-base porphyrin 122 using zinc acetate in a chloroform-methanol mixture. Further, the azide–alkyne click reaction between porphyrin 123 and 6-azido-6-deoxy-PM-β-CD 124 in the

Continuous flow synthesis of 6-monoamino-6-monodeoxy-β-cyclodextrin

• János Máté Orosz,
• Dóra Ujj,
• Petr Kasal,
• Gábor Benkovics and
• Erika Bálint

Beilstein J. Org. Chem. 2023, 19, 294–302, doi:10.3762/bjoc.19.25

• the other hand, sodium azide in N,N-dimethylformamide (DMF) reacts with mono-6-O-tosyl-CDs to give CD monoazides in high yields. The obtained mono(6-azido-6-deoxy)-CDs (N3-CDs) are valuable precursors that can be used as starting materials in azide–alkyne click reactions; furthermore, they can be

Inline purification in continuous flow synthesis – opportunities and challenges

• Jorge García-Lacuna and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 1720–1740, doi:10.3762/bjoc.18.182

• -butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine on polystyrene) which is valuable for reaction scale-ups [75] is used. Alternatively, a CuAAc (copper-catalyzed azide–alkyne cycloaddition) reaction has been demonstrated where the copper catalyst is supported on an Amberlist A-21 resin

A novel bis-triazole scaffold accessed via two tandem [3 + 2] cycloaddition events including an uncatalyzed, room temperature azide–alkyne click reaction

• Ksenia Malkova,
• Andrey Bubyrev,
• Vasilisa Krivovicheva,
• Dmitry Dar’in,
• Alexander Bunev and
• Mikhail Krasavin

Beilstein J. Org. Chem. 2022, 18, 1636–1641, doi:10.3762/bjoc.18.175

• proceeded further, in uncatalyzed fashion at room temperature and yielded, after intramolecular azide–alkyne click reaction novel, structurally intriguing bistriazoles. Keywords: α-acetyl-α-diazomethane sulfonamide; intramolecular click reaction; uncatalyzed; room temperature; 1,2,3-triazoles

• molecular scaffold. Pondering various opportunities for post-condensational modifications of the 1,5-disubstituted 1,2,3-triazole core according to this strategy, we turned our attention to such powerful transformation as the azide–alkyne [3 + 2] cycloaddition (also known as the azide–alkyne click reaction

• ) [6]. Indeed, if an alkyne and an azido group were strategically positioned within the structure of the amine and the aldehyde components for the reaction with 1, subsequent intramolecular azide–alkyne cycloaddition would be a feasible event which would create a polycyclic bis-1,2,3-triazole framework

Scope of tetrazolo[1,5-a]quinoxalines in CuAAC reactions for the synthesis of triazoloquinoxalines, imidazoloquinoxalines, and rhenium complexes thereof

• Laura Holzhauer,
• Chloé Liagre,
• Olaf Fuhr,
• Nicole Jung and
• Stefan Bräse

Beilstein J. Org. Chem. 2022, 18, 1088–1099, doi:10.3762/bjoc.18.111

• nitrogen-enriched quinoxaline-based structures. Literature-known procedures for such a quinoxaline modification starting from tetrazolo[1,5-a]quinoxalines 1 are the synthesis of 1,2,3-triazoloquinoxalines 3 via copper-catalyzed azide–alkyne cycloaddition (CuAAC) [10] and the synthesis of imidazo[1,2-a

• 1,2,3-triazoloquinoxalines 3 and imidazo[1,2-a]quinoxalines 2 under conditions known for copper-catalyzed azide–alkyne cycloaddition (CuAAC) [10]. The currently published porphyrin-catalyzed process requires glovebox conditions and the use of an expensive catalyst [11]. We intend to elucidate the

• reactions and denitrogenative annulation according to Roy et al. [11]. Copper-catalyzed azide–alkyne cycloadditions are initiated via the (dual) complexation of the alkyne, whereas denitrogenative annulation on 1,2,3,4-tetrazoles is assumed to start via complexation of the open-form azide 18 (see Scheme 4

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes

• Mio Matsumura,
• Kaho Tsukada,
• Kiwa Sugimoto,
• Yuki Murata and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 863–871, doi:10.3762/bjoc.18.87

• reagents and 1,3-dipolar azide–alkyne cycloaddition based on the alkyne moiety. Keywords: alkynyl imidazopyridinyl selenide; copper catalyst; imidazo[1,2-a]pyridine; selenium; tandem reaction; terminal alkyne; Introduction Imidazo[1,2-a]pyridines are important heterocycles that serve as key functional

• –Prakash reagent (TMSCF3) in the presence of Cs2CO3 as base in MeCN at 0 °C gave product 7 with a trifluoromethyl group. Stefani et al. reported the 1,3-dipolar azide–alkyne cycloaddition (AAC) of organotellanyl alkynes with organic azides in the presence of a copper reagent to form 5-organotellanyl-1,2,3

• regioselective 1,3-dipolar azide–alkyne cycloaddition to form 5-selanyl-1,2,3-triazole. The investigation of the biological activity of the compounds obtained in this study and the application of this synthesis route using other heterocycles, instead of imidazopyridine, are currently underway in our laboratory

Anomeric 1,2,3-triazole-linked sialic acid derivatives show selective inhibition towards a bacterial neuraminidase over a trypanosome trans-sialidase

• Peterson de Andrade,
• Sanaz Ahmadipour and
• Robert A. Field

Beilstein J. Org. Chem. 2022, 18, 208–216, doi:10.3762/bjoc.18.24

• sialic acid derivatives in good yields and high purity via copper-catalysed azide–alkyne cycloaddition (CuAAC, click chemistry) and evaluated their activity towards TcTS and neuraminidase. Surprisingly, the compounds showed practically no TcTS inhibition, whereas ca. 70% inhibition was observed for

• ) has also been introduced at C-2 of α-triazole-linked sialic acid derivatives modified at C-9 as ligands for the transmembrane glycoprotein CD22 [21]. In this sense, we have synthesised a small series of 1,2,3-triazole-linked sialic acid derivatives via copper-catalysed azide–alkyne cycloaddition

• 3a–h via copper-catalysed azide–alkyne cycloaddition (CuAAC) from the key intermediate 1 (B). TcTS and neuraminidase hydrolase activity (A) as well as TcTS transferase activity (B) in the presence of an acceptor substrate. TcTS and neuraminidase inhibition by 1,2,3-triazole-linked sialic acid

Exfoliated black phosphorous-mediated CuAAC chemistry for organic and macromolecular synthesis under white LED and near-IR irradiation

• Azra Kocaarslan,
• Zafer Eroglu,
• Önder Metin and
• Yusuf Yagci

Beilstein J. Org. Chem. 2021, 17, 2477–2487, doi:10.3762/bjoc.17.164

• , Turkey King Abdulaziz University, Faculty of Science, Chemistry Department, 21589 Jeddah, Saudi Arabia 10.3762/bjoc.17.164 Abstract The development of long-wavelength photoinduced copper-catalyzed azide–alkyne click (CuAAC) reaction routes is attractive for organic and polymer chemistry. In this study

Sustainable manganese catalysis for late-stage C–H functionalization of bioactive structural motifs

• Jongwoo Son

Beilstein J. Org. Chem. 2021, 17, 1733–1751, doi:10.3762/bjoc.17.122

• conjugative transformations, such as azide–alkyne [3 + 2]-cycloaddition [30][31][32][33][34][35][36][37]. Based on their previous late-stage fluorination studies [22][25], Groves et al. further showcased a manganese(III)–salen-catalyzed azidation process using an aqueous azide solution as a convenient azide

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• -catalyzed azide–alkyne cycloaddition (CuAAC) for the synthesis of 1,4-disubstituted 1,2,3-triazole derivatives was initially discovered by the groups of Meldal and Sharpless. Then, Ru-catalyzed azide–alkyne cycloaddition (RuAAC), affording selectively 1,5-disubstituted 1,2,3-triazoles, was introduced [38

• decrease in the yield [47]. Some research groups have utilized strain-promoted azide–alkyne cycloaddition reactions (SPAAC) on side chains to afford polymer-based prodrugs. Generally, a range of key strained cyclooctyne derivatives 52 could be reacted with aliphatic azides 51 via this strategy to give

• species for the subsequent catalytic run (Scheme 41) [63]. Kumar et al. presented a novel protocol for the synthesis of highly functionalized 1,2,3-triazole-fused 5-, 6-, and 7-membered rings 152–154 via azide–alkyne cycloaddition, followed by C(sp2)−H functionalization of the 1,2,3‐triazole intermediate

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

• nucleosides were further reacted with propargylated nucleobases through a copper-catalyzed azide–alkyne cycloaddition (CuAAC) reaction followed by treatment with methanolic ammonia to give the C-3′-substituted double-headed ribofuranonucleosides 46a–c and 50a–e (Scheme 11) [36]. The double-headed nucleosides

Synthesis of β-triazolylenones via metal-free desulfonylative alkylation of N-tosyl-1,2,3-triazoles

• Soumyaranjan Pati,
• Renata G. Almeida,
• Eufrânio N. da Silva Júnior and
• Irishi N. N. Namboothiri

Beilstein J. Org. Chem. 2021, 17, 762–770, doi:10.3762/bjoc.17.66

• Meldal have independently developed a copper-catalysed azide–alkyne cycloaddition that accelerated the rate of the reaction and allowed the selective preparation of 1,5-disubstituted 1,2,3-triazoles [16][17][18][19]. As noted above, a wide range of methods are available in the literature for the

Effective microwave-assisted approach to 1,2,3-triazolobenzodiazepinones via tandem Ugi reaction/catalyst-free intramolecular azide–alkyne cycloaddition

• Maryna O. Mazur,
• Oleksii S. Zhelavskyi,
• Eugene M. Zviagin,
• Svitlana V. Shishkina,
• Vladimir I. Musatov,
• Maksim A. Kolosov,
• Elena H. Shvets,
• Anna Yu. Andryushchenko and
• Valentyn A. Chebanov

Beilstein J. Org. Chem. 2021, 17, 678–687, doi:10.3762/bjoc.17.57

• followed by microwave-assisted intramolecular azide–alkyne cycloaddition (IAAC) gave a series of target heterocyclic compounds in moderate to excellent yields. Surprisingly, the normally required ruthenium-based catalysts were found to not affect the IAAC, only making isolation of the target compounds

• to a large number of diverse heterocyclic compounds [10][11]. Over the past decade, several cases of using an Ugi four-component reaction (Ugi-4CR) in combination with intramolecular azide–alkyne cycloaddition (IAAC) for the synthesis of 1,2,3-triazolobenzodiazepines were reported [3][7][12][13][14

• availability of previously described methods for the synthesis of 1,2,3-triazolobenzodiazepines represented in Scheme 1, they have such drawbacks as long reaction time, use of toxic solvents, additional catalysts, etc. In this article, we present a novel tandem Ugi/catalyst-free intramolecular azide–alkyne

1,2,3-Triazoles as leaving groups: S_NAr reactions of 2,6-bistriazolylpurines with O- and C-nucleophiles

• Dace Cīrule,
• Irina Novosjolova,
• Ērika Bizdēna and
• Māris Turks

Beilstein J. Org. Chem. 2021, 17, 410–419, doi:10.3762/bjoc.17.37

• of purine [73][74][75][76] or alkylation of inosine or guanosine derivatives (Ib→II, Scheme 1) [30][36]. In the next step, azide can be introduced either by a second SNAr reaction on the C2-halo derivative or by diazotization/azidation at C2. Then, the Cu(I)-catalyzed azide–alkyne cycloaddition