Recent advances in oxidative radical difunctionalization of N-arylacrylamides enabled by carbon radical reagents

• Jiangfei Chen,
• Yi-Lin Qu,
• Ming Yuan,
• Xiang-Mei Wu,
• Heng-Pei Jiang,
• Ying Fu and
• Shengrong Guo

Beilstein J. Org. Chem. 2025, 21, 1207–1271, doi:10.3762/bjoc.21.98

• , operated at a constant current of 5 mA in N,N-dimethylformamide (DMF) containing n-Bu4NBF4 as the electrolyte. The reaction proceeded efficiently at 100 °C under an inert atmosphere, yielding halogenated oxindoles in good to excellent yields. The substrate scope was systematically explored, revealing broad

Selective monoformylation of naphthalene-fused propellanes for methylene-alternating copolymers

• Kenichi Kato,
• Tatsuki Hiroi,
• Seina Okada,
• Shunsuke Ohtani and
• Tomoki Ogoshi

Beilstein J. Org. Chem. 2025, 21, 1183–1191, doi:10.3762/bjoc.21.95

• ][59][60]. This scheme also enables control of the number of formyl groups by starting materials and reagents. Brominated [4.3.3]propellane was reacted with n-BuLi or iPrMgCl·LiCl to generate an organometal species, which was quenched with N,N-dimethylformamide (DMF) as an electrophile (Table S201 in

Recent advances in synthetic approaches for bioactive cinnamic acid derivatives

• Betty A. Kustiana,
• Galuh Widiyarti and
• Teni Ernawati

Beilstein J. Org. Chem. 2025, 21, 1031–1086, doi:10.3762/bjoc.21.85

• cinnamic acid (7) and N,N’-dimethylformamide (DMF)-mediated by POCl3 via acid chloride 36 formation (Scheme 20) [52]. On top of the carboxyl activation approaches demonstrated above, O/N-acylation could also be achieved by employing an electrophilic alkylating agent by exploiting the nucleophilicity of the

• of alkynes 297 with N,N’-dimethylformamide (DMF) to afford the corresponding cinnamamide 298 via ligand-to-ligand hydrogen transfer 299 (Scheme 72) [123]. Furthermore, Song and co-workers (2023) employed propargylic ester 300 to prepare the corresponding cinnamic esters/amides with excellent anti

Recent advances in controllable/divergent synthesis

• Jilei Cao,
• Leiyang Bai and
• Xuefeng Jiang

Beilstein J. Org. Chem. 2025, 21, 890–914, doi:10.3762/bjoc.21.73

• generated the [1 + 1] macrocycle 39 as the sole product. In contrast, polar aprotic solvents such as dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), or acetonitrile (MeCN) favored precipitation of the [2 + 2] macrocycle 40. Notably, the macrocycle 40 underwent spontaneous structural reorganization

Asymmetric synthesis of fluorinated derivatives of aromatic and γ-branched amino acids via a chiral Ni(II) complex

• Maurizio Iannuzzi,
• Thomas Hohmann,
• Michael Dyrks,
• Kilian Haoues,
• Katarzyna Salamon-Krokosz and
• Beate Koksch

Beilstein J. Org. Chem. 2025, 21, 659–669, doi:10.3762/bjoc.21.52

• lead to any yield improvement (Table 2, entries 7–13). Herein, using dimethylformamide (DMF), different equiv of alkyl bromide were further screened resulting in a yield of 93%. Thus, 1.5 equiv NaH with 1.5 equiv alkyl bromide in DMF at 0 °C to room temperature have been identified as optimal

Formaldehyde surrogates in multicomponent reactions

• Cecilia I. Attorresi,
• Javier A. Ramírez and
• Bernhard Westermann

Beilstein J. Org. Chem. 2025, 21, 564–595, doi:10.3762/bjoc.21.45

• medicinal chemistry [58]. One of the most effective strategies for their synthesis is the addition of alkynes to imines or enamines, which is typically carried out under metal catalysis and elevated temperatures. This process requires the use of high boiling point solvents such as toluene, dimethylformamide

• (DMF), dimethyl sulfoxide (DMSO), or dioxane to achieve high yields. The assumed mechanism is initiated by activation of the C–H bond of the terminal alkyne by a metal catalyst. The resulting metal acetylide reacts with the imine/enamine through a nucleophilic addition. Because imines/enamines are

Synthesis and characterizations of highly luminescent 5-isopropoxybenzo[rst]pentaphene

• Islam S. Marae,
• Jingyun Tan,
• Rengo Yoshioka,
• Zakaria Ziadi,
• Eugene Khaskin,
• Serhii Vasylevskyi,
• Ryota Kabe,
• Xiushang Xu and
• Akimitsu Narita

Beilstein J. Org. Chem. 2025, 21, 270–276, doi:10.3762/bjoc.21.19

• (Figure 2c). In contrast, BPP-dione 4 displayed a considerable redshift of the emission maximum from 538 nm in toluene to 572 nm in dimethylformamide (DMF) along with disappearance of the shoulder peak with increasing solvent polarity (Figure 2d). The UV–vis absorption spectra of 4 in different solvents

Nickel-catalyzed cross-coupling of 2-fluorobenzofurans with arylboronic acids via aromatic C–F bond activation

• Takeshi Fujita,
• Haruna Yabuki,
• Ryutaro Morioka,
• Kohei Fuchibe and
• Junji Ichikawa

Beilstein J. Org. Chem. 2025, 21, 146–154, doi:10.3762/bjoc.21.8

• JMS-T100GCV or a JEOL JMS-T200GC spectrometer. All the reactions were conducted under argon or nitrogen. Materials: Column chromatography was conducted on silica gel (Silica Gel 60 N, Kanto Chemical Co., Inc.). Toluene and N,N-dimethylformamide (DMF) were purified by a solvent-purification system

Cyclodextrin-based rotaxanes for polymer materials: challenge on simultaneous realization of inexpensive production and defined structures

• Yosuke Akae

Beilstein J. Org. Chem. 2024, 20, 3026–3049, doi:10.3762/bjoc.20.252

• molecule must be sufficiently long to penetrate the CD cavity and be available for the end-capping reactions, (3) the inclusion complex must dissolve appropriately, (4) the solvent must not decompose the inclusion complex (water or other polar organic solvents, such as dimethylformamide (DMF) and dimethyl

gem-Difluorination of carbon–carbon triple bonds using Brønsted acid/Bu₄NBF₄ or electrogenerated acid

• Mizuki Yamaguchi,
• Hiroki Shimao,
• Kengo Hamasaki,
• Keiji Nishiwaki,
• Shigenori Kashimura and
• Kouichi Matsumoto

Beilstein J. Org. Chem. 2024, 20, 2261–2269, doi:10.3762/bjoc.20.194

• , entry 6), but TfOH gave the product 2a in 72% yield (Table 1, entry 7). As for the solvent, CH3CN slightly afforded 2a, although N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO) were not suitable for the reactions (Table 1, entries 8–10). A fluorine source, such as Bu4NF or BF3·Et2O, instead of

Regioselective alkylation of a versatile indazole: Electrophile scope and mechanistic insights from density functional theory calculations

• Pengcheng Lu,
• Luis Juarez,
• Paul A. Wiget,
• Weihe Zhang,
• Krishnan Raman and
• Pravin L. Kotian

Beilstein J. Org. Chem. 2024, 20, 1940–1954, doi:10.3762/bjoc.20.170

• -substituted indazole analogs in 44% and 40% yields, respectively, by treating compound 6 with methyl iodide and potassium carbonate in dimethylformamide (DMF) at room temperature for 17 h [40]. Other works have shown poor selectivity when 6 and other isomers similar to 6 were reacted with isopropyl iodide and

Ortho-ester-substituted diaryliodonium salts enabled regioselective arylocyclization of naphthols toward 3,4-benzocoumarins

• Ke Jiang,
• Cheng Pan,
• Limin Wang,
• Hao-Yang Wang and
• Jianwei Han

Beilstein J. Org. Chem. 2024, 20, 841–851, doi:10.3762/bjoc.20.76

• solvents including dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), toluene, acetic acid (AcOH) and water (Table 1, entries 9–13) were carried out. However, polar solvents such as AcOH and H2O were proved to be unsuitable for this reaction. For catalysts, we found that Cu(OAc)2 gave the best results

Palladium-catalyzed three-component radical-polar crossover carboamination of 1,3-dienes or allenes with diazo esters and amines

• Geng-Xin Liu,
• Xiao-Ting Jie,
• Ge-Jun Niu,
• Li-Sheng Yang,
• Xing-Lin Li,
• Jian Luo and
• Wen-Hao Hu

Beilstein J. Org. Chem. 2024, 20, 661–671, doi:10.3762/bjoc.20.59

• started our studies with the palladium-catalyzed MCR of ethyl diazoacetate (1a), 1,3-butadiene (2a), and 1-phenylpiperazine (3a) in the presence of 5 mol % Pd(OAc)2 and 10 mol % Xantphos as ligand. To our delight, after irradiation with blue LED light in dimethylformamide (DMF) for 12 h at room

Perspectives on push–pull chromophores derived from click-type [2 + 2] cycloaddition–retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

• Michio Yamada

Beilstein J. Org. Chem. 2024, 20, 125–154, doi:10.3762/bjoc.20.13

• conditions, particularly the solvent employed. For instance, when toluene is used as the reaction solvent, a reaction at 100 °C for 15 h affords an E/Z mixture of 7 (E/Z ≈ 1:1) with 90% yield, 8 with 10% yield, and 9 with 0% yield. In contrast, a reaction at 25 °C for 15 h in N,N-dimethylformamide (DMF

Selectivity control towards CO versus H₂ for photo-driven CO₂ reduction with a novel Co(II) catalyst

• Lisa-Lou Gracia,
• Philip Henkel,
• Olaf Fuhr and
• Claudia Bizzarri

Beilstein J. Org. Chem. 2023, 19, 1766–1775, doi:10.3762/bjoc.19.129

• -dimethylacetamide (DMA) as the major component. Although this solvent has very similar properties as the mostly used N,N-dimethylformamide (DMF), it is highly stable and does not produce formate upon hydrolysis [49]. In the solvent system DMA/TEOA 3:1 (v/v), we could observe that carbon monoxide was formed, however

Eschenmoser coupling reactions starting from primary thioamides. When do they work and when not?

• Lukáš Marek,
• Jiří Váňa,
• Jan Svoboda and
• Jiří Hanusek

Beilstein J. Org. Chem. 2023, 19, 808–819, doi:10.3762/bjoc.19.61

• . recommended [24] a polar aprotic solvent such as DMSO that facilitates the formation of both α-thioiminium salt (III) as well as Eschenmoser contraction involving the attack of the exposed carbanion towards the imine/iminium group (V). Based on our previous experience [3][4] we favor dimethylformamide (DMF

Continuous flow synthesis of 6-monoamino-6-monodeoxy-β-cyclodextrin

• János Máté Orosz,
• Dóra Ujj,
• Petr Kasal,
• Gábor Benkovics and
• Erika Bálint

Beilstein J. Org. Chem. 2023, 19, 294–302, doi:10.3762/bjoc.19.25

• the other hand, sodium azide in N,N-dimethylformamide (DMF) reacts with mono-6-O-tosyl-CDs to give CD monoazides in high yields. The obtained mono(6-azido-6-deoxy)-CDs (N3-CDs) are valuable precursors that can be used as starting materials in azide–alkyne click reactions; furthermore, they can be

Investigation of cationic ring-opening polymerization of 2-oxazolines in the “green” solvent dihydrolevoglucosenone

• Solomiia Borova and
• Robert Luxenhofer

Beilstein J. Org. Chem. 2023, 19, 217–230, doi:10.3762/bjoc.19.21

• -dimethylformamide (DMF), N-methyl-2-pyrrolidone (NMP), acetonitrile (MeCN), etc., have been added to the registration, evaluation, authorization and restriction of chemicals (REACH) list because of their negative environmental impact [1][2]. Therefore, the search for suitable solvents for the synthesis of synthetic

Ferrocenoyl-adenines: substituent effects on regioselective acylation

• Mateja Toma,
• Gabrijel Zubčić,
• Jasmina Lapić,
• Senka Djaković,
• Davor Šakić and
• Valerije Vrček

Beilstein J. Org. Chem. 2022, 18, 1270–1277, doi:10.3762/bjoc.18.133

• kinetic and thermodynamic control of the acylation reaction. Results and Discussion It was shown that the reaction between the pyrimidine anion (uracil, thymine, or 5-fluorouracil) and FcCOCl in N,N-dimethylformamide (DMF) proceeded in a full regiospecific mode [19]. In the purine series, however, the

Electrochemical Friedel–Crafts-type amidomethylation of arenes by a novel electrochemical oxidation system using a quasi-divided cell and trialkylammonium tetrafluoroborate

• Hisanori Senboku,
• Mizuki Hayama and
• Hidetoshi Matsuno

Beilstein J. Org. Chem. 2022, 18, 1040–1046, doi:10.3762/bjoc.18.105

• ) [22][23]. We also succeeded in generating N-acyliminium ions from N,N-dimethylformamide (DMF) used as a solvent in the electrochemical carboxylation of benzyl bromides. Electrolysis of benzyl bromides in DMF containing 0.1 M Bu4NBF4 and iPr2NEt (1 equiv) using an undivided cell equipped with a Pt

Synthesis of bis-spirocyclic derivatives of 3-azabicyclo[3.1.0]hexane via cyclopropene cycloadditions to the stable azomethine ylide derived from Ruhemann's purple

• Alexander S. Filatov,
• Olesya V. Khoroshilova,
• Anna G. Larina,
• Vitali M. Boitsov and
• Alexander V. Stepakov

Beilstein J. Org. Chem. 2022, 18, 769–780, doi:10.3762/bjoc.18.77

• optimization of the reaction conditions for improving the yield of the cycloadduct 3a. A broad range of solvents was screened at different temperatures. As presented in Table 1, aprotic solvents such as 1,4-dioxane, acetonitrile, and dimethylformamide (DMF) at 65 °C favored the formation of the desired

Synthetic strategies toward 1,3-oxathiolane nucleoside analogues

• Umesh P. Aher,
• Dhananjai Srivastava,
• Girij P. Singh and
• Jayashree B. S

Beilstein J. Org. Chem. 2021, 17, 2680–2715, doi:10.3762/bjoc.17.182

• into a primary alcohol with sodium borohydride affords compound 23. The protection of the hydroxy group of compound 23 was carried out by TBDPSCl in the presence of imidazole and N,N-dimethylformamide (DMF) as solvent, and deprotection of the benzoyl group by ammonolysis provides silylated compound 24

Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• polyazulene 3 or 3’ was soluble in various organic solvents such as toluene, dichloromethane, tetrahydrofuran (THF), and N,N’-dimethylformamide (DMF). The ‘true polyazulene’ exhibited the conductivity of 5.38 × 10−8 S/cm, which was increased to 8.16 × 10−3 S/cm upon exposure to iodine atmosphere, presumably

Regioselective N-alkylation of the 1H-indazole scaffold; ring substituent and N-alkylating reagent effects on regioisomeric distribution

• Ryan M. Alam and
• John J. Keating

Beilstein J. Org. Chem. 2021, 17, 1939–1951, doi:10.3762/bjoc.17.127

• effect of varying these reaction parameters, using n-pentyl bromide as the prototypical N-alkylating reagent (Table 1). Early investigations revealed that the combination of cesium carbonate (Cs2CO3) in dimethylformamide (DMF) at room temperature (≈ 20 °C) afforded a mixture of N-1 and N-2 regioisomers

Beyond ribose and phosphate: Selected nucleic acid modifications for structure–function investigations and therapeutic applications

• Christopher Liczner,
• Kieran Duke,
• Gabrielle Juneau,
• Martin Egli and
• Christopher J. Wilds

Beilstein J. Org. Chem. 2021, 17, 908–931, doi:10.3762/bjoc.17.76

• mixture of triethylammonium bicarbonate (TEAB) and N,N-dimethylformamide (DMF) followed by a sodium borohydride reduction to give the 4'-alkoxy products [202]. The 4'-methoxy-2'-deoxynucleosides exhibited high resistance towards depurination under acidic conditions [202]. In contrast, nucleosides that are