Asymmetric synthesis of β-amino cyanoesters with contiguous tetrasubstituted carbon centers by halogen-bonding catalysis with chiral halonium salt

• Yasushi Yoshida,
• Maho Aono,
• Takashi Mino and
• Masami Sakamoto

Beilstein J. Org. Chem. 2025, 21, 547–555, doi:10.3762/bjoc.21.43

• equivalent of 7a and 5.0 equivalents of 16a in the presence of stoichiometric potassium carbonate and 1.0 mol % of 9. When bromonium salt 9a was applied to the reaction, the desired product was obtained in 83% yield with 77% ee but almost no diastereoselectivity. The iodonium salt 9b also worked well and the

• found to be optimal in enantioselectivity, and iodonium salt 9b was superior in terms of diastereoselectivity. These results can be explained by the strength of halogen bonding: generally, iodo-substituted compounds form stronger halogen bonding with Lewis bases than chloro-substituted ones [1]. Notably

• , the reaction catalyzed by only 1 mol % of iodonium salt 9b provided the opposite diastereomer of 17a as the major product compared with that without a catalyst, which revealed the high catalytic activity of our catalyst. Further reaction conditions optimization was conducted using 9a as a catalyst

Electrochemical synthesis of cyclic biaryl λ³-bromanes from 2,2’-dibromobiphenyls

• Andrejs Savkins and
• Igors Sokolovs

Beilstein J. Org. Chem. 2025, 21, 451–457, doi:10.3762/bjoc.21.32

• approach would conceptually differ from previously reported anodic syntheses of cyclic diaryl iodonium compounds, where an electrochemically generated acyclic iodine(III) intermediate undergoes an intramolecular SEAr-type reaction to form the cyclic product [19][20]. Herein, we report on the development of

Red light excitation: illuminating photocatalysis in a new spectrum

• Lucas Fortier,
• Corentin Lefebvre and
• Norbert Hoffmann

Beilstein J. Org. Chem. 2025, 21, 296–326, doi:10.3762/bjoc.21.22

• explores how this bismuth(I) complex undergoes oxidative addition with a variety of aryl electrophiles, including diazonium salts, iodonium salts, and challenging aryl iodides and aryl thianthrenium salts, typically requiring transition-metal catalysts (Figure 3). The reactivity of the N,C,N-bismuthinidene

• under near-infrared light exposure (Figure 8). Photopolymerization in this case is initiated by reduction of iodonium salts [50]. Following the exploration of squaraine derivatives and their applications in NIR-mediated photocatalysis, another class of compounds, cyanin molecules, has recently gained

• processes. Cyanins have been shown to effectively initiate radical polymerization under visible light through mechanisms such as borate oxidation [61] and 1,3,5-triazine reduction [62]. More recently, cyanin dyes have enabled the reduction of iodonium salts under NIR excitation [63][64]. These preliminary

Direct trifluoroethylation of carbonyl sulfoxonium ylides using hypervalent iodine compounds

• Radell Echemendía,
• Carlee A. Montgomery,
• Fabio Cuzzucoli,
• Antonio C. B. Burtoloso and
• Graham K. Murphy

Beilstein J. Org. Chem. 2024, 20, 3182–3190, doi:10.3762/bjoc.20.263

• ) hypervalent iodonium salts, for the efficient synthesis of fluorinated sulfoxonium ylides (Scheme 1c). Results and Discussion Since the introduction of hypervalent iodonium salts in organic chemistry, these valuable reagents have led to many new strategies for carbon–carbon bond formation [31][32]. Our

• studies using methyl ester sulfoxonium ylide 1a and 2,2,2-trifuoroethyl(mesityl)iodonium triflate salt (2a), as model substrates (see also Table S1 in Supporting Information File 1). Combining these at room temperature in acetonitrile produced 3a in 8% 1H NMR yield (Table 1, entry 1). Repeating the

• yield (64%), and the methyl ester-derived sulfoxonium ylide could be reacted with a tetrafluoropropyl(mesityl)iodonium salt to produce tetrafluoropropyl ylide 3s in 68% yield. These results show that a wide range of sulfoxonium ylides can be efficiently transformed to their corresponding

Hypervalent iodine-mediated intramolecular alkene halocyclisation

• Charu Bansal,
• Oliver Ruggles,
• Albert C. Rowett and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 3113–3133, doi:10.3762/bjoc.20.258

• in poor yield with α preference for 7-membered rings 7 in a ratio of 1:9.3. The authors proposed two mechanisms for the reaction (Scheme 1). In pathway A (top), the alkene-activated iodonium is formed, intramolecular attack of nitrogen forms the 6-membered ring A before an SN2 reaction with the

• proposed by the authors (Scheme 3). Activation of the HVI reagent by H-bonding leads to ligand exchange to give an aminofluoro iodonium intermediate A. Cyclisation occurs via nitrogen attack on the alkene to then give aziridinium intermediate B. Subsequent nucleophilic attack by fluoride on the more

• to form an iodonium species. Nucleophilic attack occurs on the least hindered carbon of the iodonium, before displacement of the HVI by fluoride to give the product. Zhang and co-workers reported the intramolecular aminofluorination of unsaturated amines using an HVI reagent generated in situ from

Advances in radical peroxidation with hydroperoxides

• Oleg V. Bityukov,
• Pavel Yu. Serdyuchenko,
• Andrey S. Kirillov,
• Gennady I. Nikishin,
• Vera A. Vil’ and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2024, 20, 2959–3006, doi:10.3762/bjoc.20.249

• reaction mechanism was proposed as an anchored ionic type pathway, rather than the free radical one. First, the Togni reagent forms complex A with the dinuclear paddle-wheel copper nodes of Cu3(BTC)2. Complex A then adds to styrene 175 to form iodonium cation B, which is converted to intermediate D by

Structure and thermal stability of phosphorus-iodonium ylids

• Andrew Greener,
• Stephen P. Argent,
• Coby J. Clarke and
• Miriam L. O’Duill

Beilstein J. Org. Chem. 2024, 20, 2931–2939, doi:10.3762/bjoc.20.245

• functionalities they can transfer. In this study, a fundamental understanding of the thermal stability of phosphorus-iodonium ylids is obtained through X-ray diffraction, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Insights into the structural factors affecting thermal stability

• groups or delocalisation into a π-system results in crystalline, bench-stable reagents. In the absence of stabilising factors, rapid decomposition occurs [21][22][23]. In this study, we aim to gain a fundamental understanding of the factors that stabilise phosphorus-iodonium ylids 1 (Figure 1B) [24][25

• the rational design and synthesis of novel, unstabilised hypervalent iodine(III) compounds and expand the application of these powerful reagents in organic synthesis. Results and Discussion Structural data Twelve phosphorus-iodonium ylids were synthesised (Figure 2). X-ray diffraction data (XRD) of

Recent advances in transition-metal-free arylation reactions involving hypervalent iodine salts

• Ritu Mamgain,
• Kokila Sakthivel and
• Fateh V. Singh

Beilstein J. Org. Chem. 2024, 20, 2891–2920, doi:10.3762/bjoc.20.243

• in aryl-transfer processes, DIAS are frequently employed as photoinitiators for cationic polymerizations [31][32][33], Lewis acids [34], oxidants [35][36] and in the field of macromolecular chemistry [37][38]. Additionally, biological activity is also exhibited by iodonium salts, often due to their

• -arylation of α-cyano-α-fluoroacetamides (9, R = CN), too. Aryl(mesityl)iodonium salts 6 (which are unsymmetrical diaryliodonium salts) were used as hypervalent iodine salts in both reactions. To achieve the C(sp3)-arylation of the α-nitro derivative of compounds 9 within 2 h to yield products 10, K2CO3 as

• arenes were attained in good to excellent yields [56]. Additionally, the same reaction was further explored by using α-fluoro-α-nitrosulfonylmethanes as starting material under modified reaction conditions to yield the arylated α-fluoronitrosulfonylmethane [57]. Phenyl(mesityl)iodonium salt was employed

A review of recent advances in electrochemical and photoelectrochemical late-stage functionalization classified by anodic oxidation, cathodic reduction, and paired electrolysis

• Nian Li,
• Ruzal Sitdikov,
• Ajit Prabhakar Kale,
• Joost Steverlynck,
• Bo Li and
• Magnus Rueping

Beilstein J. Org. Chem. 2024, 20, 2500–2566, doi:10.3762/bjoc.20.214

• that dimerize to form iodine (I2). Subsequent anodic oxidation of in-situ formed Et3N produced an α-amino radical. The iodine then reacts with the alkene to form an iodonium intermediate, which undergoes intramolecular cyclization with losing an electron, and a second water attack to yield the desired

Evaluating the halogen bonding strength of a iodoloisoxazolium(III) salt

• Dominik L. Reinhard,
• Anna Schmidt,
• Marc Sons,
• Julian Wolf,
• Elric Engelage and
• Stefan M. Huber

Beilstein J. Org. Chem. 2024, 20, 2401–2407, doi:10.3762/bjoc.20.204

• it with our known iodonium species in the activation of Au(I)–Cl bonds. Results and Discussion As immediate precursor to the target structure 7Z, the literature-known isoxazole 10 was synthesized via a Cu(I)-catalyzed cycloaddition between (2-iodophenyl)acetylene (8) and benzyl nitrile oxide, which

• , indicating that the activated gold complex is the catalytically active species. Furthermore, stability measurements (1H and 19F NMR) of 1:1 mixtures of the gold complex and the XB donors were performed in order to investigate the stability of the cationic iodonium structures towards the gold complex [28

• iodonium structures 1+, 2+, 3+, and 7+ were found to be constant (see Supporting Information File 1). The signals of the iodoxinium cation 4+ were overlapping with signals of the anion. However, the stability of 4+ (as well as of 2+) could be confirmed by 19F NMR measurements: no decomposition of the

Hydrogen-bond activation enables aziridination of unactivated olefins with simple iminoiodinanes

• Phong Thai,
• Lauv Patel,
• Diyasha Manna and
• David C. Powers

Beilstein J. Org. Chem. 2024, 20, 2305–2312, doi:10.3762/bjoc.20.197

• iminoiodinane reacts directly with the olefin to generate a short-lived alkyl-bound iodinane 7 or iodonium species 8 (Scheme 4f). Ligand coupling from 7 or extrusion of iodobenzene from 8 would furnish a carbocation intermediate 9 which could undergo C–C bond rotation prior to ring closure to form the aziridine

Harnessing the versatility of hydrazones through electrosynthetic oxidative transformations

• Aurélie Claraz

Beilstein J. Org. Chem. 2024, 20, 1988–2004, doi:10.3762/bjoc.20.175

• iodonium through a two-electron process. Subsequent reaction with the hydrazone and deprotonation formed the N-iodo hydrazone intermediate 80, triggering the reaction with the amine 78 through cationic species 81. Final cyclization delivered the desired pyrazole 79 (Scheme 15) [60]. The group of D. Tang

• of the iodonium species [(CH3CN)2I+], which would react with the hydrazone to furnish the protonated diazo compound 143 via the N-iodo hydrazone intermediate 142. Further acetate anion-assisted deprotonation ultimately led to the desired diazo compounds 141 (Scheme 30) [80]. A nice application of

• hydrazone through the in situ generation of iodonium as oxidant while the latter would facilitate the deprotonation of iodoammonium 162 and the elimination of HI from N-iodo intermediate 163. The best yields were obtained with aromatic ketone-derived hydrazones (Scheme 33) [83]. Conclusion Given the rich

Solvent-dependent chemoselective synthesis of different isoquinolinones mediated by the hypervalent iodine(III) reagent PISA

• Ze-Nan Hu,
• Yan-Hui Wang,
• Jia-Bing Wu,
• Ze Chen,
• Dou Hong and
• Chi Zhang

Beilstein J. Org. Chem. 2024, 20, 1914–1921, doi:10.3762/bjoc.20.167

• the substrate, and thus preventing the possible interaction between the amide moiety and PISA, as opposed to CH3CN. The olefin moiety of the complex then interacts with the exposed central iodine(III) atom in PISA [25], forming the intermediate D. Similar cyclic iodonium intermediates were also

The Groebke–Blackburn–Bienaymé reaction in its maturity: innovation and improvements since its 21st birthday (2019–2023)

• Cristina Martini,
• Muhammad Idham Darussalam Mardjan and
• Andrea Basso

Beilstein J. Org. Chem. 2024, 20, 1839–1879, doi:10.3762/bjoc.20.162

• an effective chalcogen bond donation to the substrates, in place of the halogen bonding previously described. Although their catalytic activity was reported to be lower than the one of aryl iodonium derivatives, this research contributed to the scarce number of publications on the catalytic activity

• of chalcogen-based noncovalent organocatalysts. In 2023, Bolotin et al. published another article on the same subject [15], reporting a general improvement of electrophilic activation of carbonyl and imino groups by synergetic effect of aryl iodonium salts and silver cations. However, when similar

A comparison of structure, bonding and non-covalent interactions of aryl halide and diarylhalonium halogen-bond donors

• Nicole Javaly,
• Theresa M. McCormick and
• David R. Stuart

Beilstein J. Org. Chem. 2024, 20, 1428–1435, doi:10.3762/bjoc.20.125

• (mesityl)iodonium cation (3) the iodine atom uses 88.54% p-character to bond with the phenyl group. Phenyl iodide (27) has three lone-pairs, whereas the phenyl(mesityl)iodonium cation (3) has two lone-pairs (though it does have another aryl group), and therefore this observation is consistent with Bent’s

Oxidative hydrolysis of aliphatic bromoalkenes: scope study and reactivity insights

• Amol P. Jadhav and
• Claude Y. Legault

Beilstein J. Org. Chem. 2024, 20, 1286–1291, doi:10.3762/bjoc.20.111

• ). In situ generation of Koser-like reagent by addition of excess TsOH·H2O (2.0 equiv) to either PIDA or p-OMe-PIDA did not further improve the yield for α-bromoketone (Table 1, entries 3 and 4). We envisioned that altering the iodonium intermediate counterion by replacing TsOH with either MsOH or HNTf2

• the formation of the phenyl tosyloxy iodonium intermediate A from catalytic HTIB. Dialkyl bromoalkene 1 then associates with A followed by attack of tosyloxy or water, delivering iodonium intermediate B. Being a better leaving group, the bromide anion is then expelled, which becomes a counterion for

• the iodonium intermediate C. Liberation of PhI serves as the driving force for subsequent SN2 attack by the bromide anion to give the dialkyl α-bromoketone 2. m-CPBA then regenerates the hypervalent iodine (HTIB) catalyst by oxidizing PhI in the presence of TsOH·H2O. The formation of the Ritter-type

Domino reactions of chromones with activated carbonyl compounds

• Peter Langer

Beilstein J. Org. Chem. 2024, 20, 1256–1269, doi:10.3762/bjoc.20.108

• these products can be explained by initial formation of the corresponding 2-(salicyloyl)furans V. Iodination of the latter afforded iodonium salt W which underwent cyclization by attack of the salicylate hydroxy group to give intermediate X. Extrusion of hydrogen iodide afforded the final product

• these products can be explained, similarly to the formation of 35a–f, by generation of intermediate Y which afforded iodonium salt Z upon addition of iodine. Cyclization by attack of the salicylate hydroxy group to carbon C5 gave intermediate AB. Hydrolysis of the iodide upon aqueous work-up to give an

Auxiliary strategy for the general and practical synthesis of diaryliodonium(III) salts with diverse organocarboxylate counterions

• Naoki Miyamoto,
• Daichi Koseki,
• Kohei Sumida,
• Elghareeb E. Elboray,
• Naoko Takenaga,
• Ravi Kumar and
• Toshifumi Dohi

Beilstein J. Org. Chem. 2024, 20, 1020–1028, doi:10.3762/bjoc.20.90

• are versatile reagents that exhibit a range of reactions, both in the presence and absence of metal catalysts. In this study, we developed efficient synthetic methods for the preparation of aryl(TMP)iodonium(III) carboxylates, by reaction of (diacetoxyiodo)arenes or iodosoarenes with 1,3,5

• wide range of substituents on (hetero)aryl iodine(III) compounds, including electron-rich, electron-poor, sterically congested, and acid-labile groups, as well as a broad range of aliphatic and aromatic carboxylic acids for the synthesis of diverse aryl(TMP)iodonium(III) carboxylates in high yields

• -arylation using aryl(2,4,6-trimethoxyphenyl)iodonium(III) acetates [13]. In this process, the acetate ligand acted as a base to activate the phenol group and positioned it in proximity to accomplish the smooth SNAr reaction. The synthesis of diaryliodonium(III) salts with various counterions, such as

Three-component N-alkenylation of azoles with alkynes and iodine(III) electrophile: synthesis of multisubstituted N-vinylazoles

• Jun Kikuchi,
• Roi Nakajima and
• Naohiko Yoshikai

Beilstein J. Org. Chem. 2024, 20, 891–897, doi:10.3762/bjoc.20.79

• iodonium salts [9], which usually occurs with the retention of the stereochemistry of the vinylating agents (Scheme 1a). Nonetheless, this approach is not necessarily suited for the stereoselective preparation of densely substituted N-vinylazoles because preparing the requisite multisubstituted vinylating

(Bio)isosteres of ortho- and meta-substituted benzenes

• H. Erik Diepers and
• Johannes C. L. Walker

Beilstein J. Org. Chem. 2024, 20, 859–890, doi:10.3762/bjoc.20.78

• nitrogen-substituted 1,5-BCHeps 141a–d through a photoredox-catalysed aminoalkylation with amines 140 and iodonium dicarboxylates 139 (Scheme 15A) [27]. Both Anderson and Uchiyama also reported the synthesis of chalcogen- and tin-substituted 1,5-BCHeps 145a–f from [3.1.1]propellane (Scheme 15B) [27][47][60

Ortho-ester-substituted diaryliodonium salts enabled regioselective arylocyclization of naphthols toward 3,4-benzocoumarins

• Ke Jiang,
• Cheng Pan,
• Limin Wang,
• Hao-Yang Wang and
• Jianwei Han

Beilstein J. Org. Chem. 2024, 20, 841–851, doi:10.3762/bjoc.20.76

• -trifluoroborate-substituted diaryliodonium salts furnished iodonium zwitterions as bifunctional reagents [22][23][24][25]. Additionally, ortho-trifluoromethanesulfonate, N-sulfonyl, or tosylmethylene-substituted diaryliodonium salts can undergo intramolecular aryl migrations [26][27][28]. More recently, we

• isolated as stable solids, whose structures were fully characterized by NMR spectroscopy. As shown in Table 3, we utilized 2-naphthol and 1-naphthol as template substrates to react with various unsymmetrical 2-ester-substituted diaryliodonium salts. Remarkably, iodonium salts 2 proved to be versatile in

Synthesis of N-acyl carbazoles, phenoxazines and acridines from cyclic diaryliodonium salts

• Nils Clamor,
• Mattis Damrath,
• Thomas J. Kuczmera,
• Daniel Duvinage and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2024, 20, 12–16, doi:10.3762/bjoc.20.2

• tested this method with a wide range of amides and iodonium triflates, proving its versatility with numerous substrates. Beyond carbazoles, we also produced a variety of other N-heterocycles, such as acridines, phenoxazines, or phenazines, showcasing the robustness of our technique. In a broader sense

• of two equivalents of halogen salt waste. Their substitution with iodolium salts will be more sustainable since it reduces these unproductive halogenide salts by half. Due to our recent activity in the field of synthesis and applications of 5- and 6-membered cyclic iodonium salts, we searched for an

• diaryliodonium salts [29][31], as well as Pd-catalysed methods for synthesizing N-aryl carbazoles [32]. Similar procedures were published for the Cu-catalysed synthesis of aryl carbazoles from amines as well as other heterocycles such as N-acyl acridanes with nitriles using cyclic iodonium salts by Wen and Chen

Exploring the role of halogen bonding in iodonium ylides: insights into unexpected reactivity and reaction control

• Carlee A. Montgomery and
• Graham K. Murphy

Beilstein J. Org. Chem. 2023, 19, 1171–1190, doi:10.3762/bjoc.19.86

• -holes. Halogen bonding and σ-holes have been encountered in numerous monovalent and hypervalent iodine-containing compounds, and in 2022 σ-holes were computationally confirmed and quantified in the iodonium ylide subset of hypervalent iodine compounds. In light of this new discovery, this article

• provides an overview of the reactions of iodonium ylides in which halogen bonding has been invoked. Herein, we summarize key discoveries and mechanistic proposals from the early iodonium ylide literature that invoked halogen bonding-type mechanisms, as well as recent reports of reactions between iodonium

• ylides and Lewis basic nucleophiles in which halogen bonding has been specifically invoked. The reactions discussed herein are organized to enable the reader to build an understanding of how halogen bonding might impact yield and chemoselectivity outcomes in reactions of iodonium ylides. Areas of focus

Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

• limited to electron-poor arenes like diazonium/iodonium salts or aryl iodides with electron-withdrawing substituents as aryl radical precursors, due to the limited accessible reducing power of photocatalysts that relied on a monophotonic excitation event. However, the vast majority of inexpensive

Copper-catalyzed N-arylation of amines with aryliodonium ylides in water

• Kasturi U. Nabar,
• Bhalchandra M. Bhanage and
• Sudam G. Dawande

Beilstein J. Org. Chem. 2023, 19, 1008–1014, doi:10.3762/bjoc.19.76

• electron-withdrawing groups on the aryl ring reacted smoothly with iodonium ylides to give the corresponding diarylamines with good to excellent yields. Also, secondary amines underwent N-arylation to deliver tertiary amines with moderate yields. Keywords: amines; arylation; C–N bond formation; iodonium

• ]. Further, a few reports are also available for the copper and palladium-catalyzed N-arylation of primary and secondary aliphatic as well as aromatic amines using diaryliodonium salts as aryl sources [33][34][35] (Scheme 1a). Similarly, iodonium ylides undergo a wide range of reactions through in situ

• generation of carbene as a reactive intermediate [36][37]. Also, spirocyclic iodonium ylides have been used for radiolabeling techniques [38]. In 2013, Shibata’s research group reported a novel trifluoromethanesulfonyl iodonium ylide for trifluoromethylthiolation of enamines, indoles, and ketoesters