Three-component reactions of conjugated dienes, CH acids and formaldehyde under diffusion mixing conditions

• Dmitry E. Shybanov,
• Maxim E. Kukushkin,
• Eugene V. Babaev,
• Nikolai V. Zyk and
• Elena K. Beloglazkina

Beilstein J. Org. Chem. 2025, 21, 262–269, doi:10.3762/bjoc.21.18

• method was successfully used to generate highly active nitrile oxides and nitrilimines for 1,3-dipolar cycloaddition reactions [19][20][21]. Based on our previous experience with diffusion mixing, we assumed that formaldehyde vapor diffusion into the reaction would lead to an extremely low concentration

Multicomponent reactions driving the discovery and optimization of agents targeting central nervous system pathologies

• Lucía Campos-Prieto,
• Aitor García-Rey,
• Eddy Sotelo and
• Ana Mallo-Abreu

Beilstein J. Org. Chem. 2024, 20, 3151–3173, doi:10.3762/bjoc.20.261

• years, the Ugi reaction has emerged as a highly considered reaction due to its mild conditions, broad applications, and product diversity. It enables the selective assembly of precursors, facilitating various post-reaction transformations such as deprotection cyclization, 1,3-dipolar cycloaddition, and

Synthesis of pyrrole-fused dibenzoxazepine/dibenzothiazepine/triazolobenzodiazepine derivatives via isocyanide-based multicomponent reactions

• Marzieh Norouzi,
• Mohammad Taghi Nazeri,
• Ahmad Shaabani and
• Behrouz Notash

Beilstein J. Org. Chem. 2024, 20, 2870–2882, doi:10.3762/bjoc.20.241

• with 1,10-phenanthroline as cyclic imine under solvent-free conditions for the synthesis of pyrrole-fused phenanthroline. This reaction proceeds via in situ formation of zwitterion I through reaction of the aldehyde and malononitrile followed by 1,3-dipolar cycloaddition (Scheme 1a) [41]. Chen and co

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

• formed in situ from aromatic aldehydes and tosylhydrazine. After basic treatment of these tosylhydrazones followed by 1,3-dipolar cycloaddition with terminal alkynes, the corresponding pyrazoles 168 are obtained. The regioselectivity of this synthesis can be explained by steric causes and the favored

• HOMO (diazo compound)–LUMO (alkyne) interaction during the 1,3-dipolar cycloaddition [163], Wu et al. showed that electronic effects in this strategy do not influence the yield. In addition, sterically demanding reactants could be used in the method. Enhanced yields were achieved by using NaOEt and

• applied to synthesize 3,4,5-substituted pyrazoles 173 and 174 via 1,3-dipolar cycloaddition of in situ generated diazo compounds and vinylidenecyclopropane diesters 172, which are synthetic equivalents of alkynes (Scheme 58) [176]. Notably, employing aromatic vinylidenecyclopropane diesters (R2 = aryl) in

Syntheses and medicinal chemistry of spiro heterocyclic steroids

• Laura L. Romero-Hernández,
• Ana Isabel Ahuja-Casarín,
• Penélope Merino-Montiel,
• Sara Montiel-Smith,
• José Luis Vega-Báez and
• Jesús Sandoval-Ramírez

Beilstein J. Org. Chem. 2024, 20, 1713–1745, doi:10.3762/bjoc.20.152

• , such as a one-pot four-component synthesis and the use of ionic liquids as solvents [30]. Kanchithalaivan et al. [31] reported a library of 16-spiro pyrrolo[1,2-c][1,3]thiazoles of trans-androsterone and DHEA (49a and 49b, respectively). The syntheses were achieved through the 1,3-dipolar cycloaddition

• starting material (35%). 16-Spiropyrazoline steroids In 2009 Mernyák et al. described the synthesis of 16-spiropyrazolines from 16-methylene-13α-estrone derivatives via a 1,3-dipolar cycloaddition reaction between the methylene of α,β-unsaturated ketones 53a,b and the ylide produced from the

• superior results compared to phenyl-substituted compounds. Frank et al. synthesized a series of 16-spiroisoxazolines through a regio- and a highly stereoselective 1,3-dipolar cycloaddition between the double bond of the α,β-unsaturated steroidal ketone 73 and various arylnitrile oxides [45]. The reaction

Rapid construction of tricyclic tetrahydrocyclopenta[4,5]pyrrolo[2,3-b]pyridine via isocyanide-based multicomponent reaction

• Xiu-Yu Chen,
• Ying Han,
• Jing Sun and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2024, 20, 1436–1443, doi:10.3762/bjoc.20.126

• the amide anion in intermediate D afforded the final product 4 or 6. On the other hand, the final product 4 or 6 might be directly produced by dipolar cycloaddition reaction of 5-(alkylimino)cyclopenta-1,3-diene intermediate C with 5,6-unsaturated dihydropyridine. In consideration of the high

Trifluoromethylated hydrazones and acylhydrazones as potent nitrogen-containing fluorinated building blocks

• Zhang Dongxu

Beilstein J. Org. Chem. 2023, 19, 1741–1754, doi:10.3762/bjoc.19.127

• other derivatives in good yields [37] (Scheme 1). Later, Wu et al. described a diastereoselective 1,3-dipolar cycloaddition of trifluoroacetaldehyde hydrazones with α,β-ethenyl ketones to obtain polysubstituted pyrazolidines and pyrazolines. These reactions were carried out under two different sets of

Decarboxylative 1,3-dipolar cycloaddition of amino acids for the synthesis of heterocyclic compounds

• Xiaofeng Zhang,
• Xiaoming Ma and
• Wei Zhang

Beilstein J. Org. Chem. 2023, 19, 1677–1693, doi:10.3762/bjoc.19.123

• -stabilized azomethine ylide; Introduction The 1,3-dipolar cycloaddition of azomethine ylides (AMYs) [1][2][3][4][5][6] is a powerful method for the synthesis of bioactive pyrrolidine-containing compounds and natural product analogs [7][8][9][10][11][12][13][14][15]. AMYs generated from the reaction of

• AMYs B1 which then were reacted with nucleophiles to form C–H-functionalized pyrrolidines or subjected to the 1,3-dipolar cycloaddition with olefins to afford bicyclic compounds (Scheme 2A and B) [59][60]. We employed cyclic amines for the synthesis of spirooxindole-pyrrolidines 7a or 7b in good

• -oriented synthesis (DOS) [82][83][84][85][86][87][88]. The work presented in this paper may also be helpful to understand the reaction mechanism and stereoselectivity of semi-stabilized N–H-type AMYs. We hope the new development for 1,3-dipolar cycloaddition chemistry can be used for the synthesis of

Lewis acid-promoted direct synthesis of isoxazole derivatives

• Dengxu Qiu,
• Chenhui Jiang,
• Pan Gao and
• Yu Yuan

Beilstein J. Org. Chem. 2023, 19, 1562–1567, doi:10.3762/bjoc.19.113

• oxide E [23], which can be converted to the desired isoxazole with 1a through a 1,3-dipolar cycloaddition. Conclusion In conclusion, we have developed an efficient and concise synthesis of isoxazole nitrogen heterocycles by direct C–H-bond activation of methyl heteroaromatics. The method avoids using

Morpholine-mediated defluorinative cycloaddition of gem-difluoroalkenes and organic azides

• Tzu-Yu Huang,
• Mario Djugovski,
• Sweta Adhikari,
• Destinee L. Manning and
• Sudeshna Roy

Beilstein J. Org. Chem. 2023, 19, 1545–1554, doi:10.3762/bjoc.19.111

• -difluoroalkenes that subsequently undergoes a cycloaddition reaction. Results and Discussion While investigating 1,3-dipolar cycloaddition reactions between organic azides and gem-difluoroalkenes to obtain the 4-fluoro-1,4-disubstituted 1,2,3-triazole regioisomers, we observed an interesting reactivity while

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• 1,3-dipolar cycloaddition and belongs to the general category of [π4s + π2s] cycloadditions. It is an important method to construct a five-membered heterocyclic ring [66]. As discussed earlier, the Cu atom in NHC–Cu(I) complexes has nucleophilic character, which allows binding to the positive end of

One-pot nucleophilic substitution–double click reactions of biazides leading to functionalized bis(1,2,3-triazole) derivatives

• Hans-Ulrich Reissig and
• Fei Yu

Beilstein J. Org. Chem. 2023, 19, 1399–1407, doi:10.3762/bjoc.19.101

• ]). Mechanistic aspects of the CuAAC have been studied in detail [16][17]. Whereas the traditional 1,3-dipolar cycloaddition (Huisgen reaction) [18][19][20] of azides and alkynes requires often – but not always – relatively harsh conditions and proceeds with moderate regioselectivity only [21], the copper

The unique reactivity of 5,6-unsubstituted 1,4-dihydropyridine in the Huisgen 1,4-diploar cycloaddition and formal [2 + 2] cycloaddition

• Xiu-Yu Chen,
• Hui Zheng,
• Ying Han,
• Jing Sun and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2023, 19, 982–990, doi:10.3762/bjoc.19.73

• ; isoquinolino[1,2-f][1,6]naphthyridine; Introduction Among various well-known cycloaddition reactions such as the 1,3-dipolar cycloaddition reaction, Diels–Alder reaction, and the Povarov reaction, the cycloaddition reaction of Huisgen 1,4-dipoles with activated alkenes received increasing attention [1][2][3

Computational studies of Brønsted acid-catalyzed transannular cycloadditions of cycloalkenone hydrazones

• Manuel Pedrón,
• Jana Sendra,
• Irene Ginés,
• Tomás Tejero,
• Jose L. Vicario and
• Pedro Merino

Beilstein J. Org. Chem. 2023, 19, 477–486, doi:10.3762/bjoc.19.37

• common reaction conditions. The reaction has been defined by Houk and Rueping as a (3+ + 2) monopolar cycloaddition [33] pointing out the protonated state of the imino nitrogen of the hydrazone in contrast to the well-known 1,3-dipolar cycloaddition of azomethine imines in which the terminal nitrogen has

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• -dipolar cycloaddition reaction between an azide and a terminal alkyne, also popular as "click reaction" or CuAAC reaction. Moreover, the 1,2,3-triazole ring also serves as a spacer and an electron transfer bridge between the porphyrin and the attached chromophores. In order to provide a critical overview

• of the synthesis and properties of various porphyrin-triazole hybrids, this review will discuss some of the key reactions involved in the preparation of triazole-linked porphyrin conjugates. Keywords: azide–alkyne; click chemistry; CuAAC; 1,3-dipolar cycloaddition; porphyrin; 1,2,3-triazole

• connect a porphyrin with a chromophoric group. Among these, the copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction [1][2] of azides with terminal alkynes is a popular and well established process to link a porphyrin with other moieties via 1,2,3-triazole group [3] (Figure 1). The term “click

Strategies to access the [5-8] bicyclic core encountered in the sesquiterpene, diterpene and sesterterpene series

• Cécile Alleman,
• Charlène Gadais,
• Laurent Legentil and
• François-Hugues Porée

Beilstein J. Org. Chem. 2023, 19, 245–281, doi:10.3762/bjoc.19.23

One-pot double annulations to confer diastereoselective spirooxindolepyrrolothiazoles

• Juan Lu,
• Bin Yao,
• Desheng Zhan,
• Zhuo Sun,
• Yun Ji and
• Xiaofeng Zhang

Beilstein J. Org. Chem. 2022, 18, 1607–1616, doi:10.3762/bjoc.18.171

• introduced in this study. Subsequently one equivalent of aldehyde and olefinic oxindole in situ were followed by decarboxylative 1,3-dipolar cycloaddition for diastereoselective synthesis of spirooxindolepyrrolothiazoles with generating 5 new bonds, 5 stereocenters and two heterocycles (Scheme 1C and Scheme

•  2C). Results and Discussion The optimized reaction conditions of stepwise, one-pot and cascade (two-step with one operational step) processes for N,S-acetalation and decarboxylative 1,3-dipolar cycloaddition were developed by using two equivalents of 4-bromobenzaldehyde (1a), ʟ-cysteine (2) and

• . Subsequent decarboxylation of thiazolooxazol-1-one I affords non-stabilized azomethine ylide (AY) for 1,3-dipolar cycloaddition with olefinic oxindole 4a to give spirooxindolepyrrolothiazoles 5 and 7. The endo-TS is more favorable than exo-TS for the 1,3-dipolar cycloaddition to afford the major and minor

Vicinal ketoesters – key intermediates in the total synthesis of natural products

• Marc Paul Beller and
• Ulrich Koert

Beilstein J. Org. Chem. 2022, 18, 1236–1248, doi:10.3762/bjoc.18.129

• of L. Overman et al. in 1997 [18] towards the originally proposed structure of palau’amine (44), a [3 + 2]-dipolar cycloaddition of α-ketoester 41 and the thiosemicarbazide 42-derived azomethine imine VI to the triazacyclopenta[cd]pentalene 43 was utilized as a key step (Scheme 7) [18][19][20][21

Synthesis of N-phenyl- and N-thiazolyl-1H-indazoles by copper-catalyzed intramolecular N-arylation of ortho-chlorinated arylhydrazones

• Yara Cristina Marchioro Barbosa,
• Guilherme Caneppele Paveglio,
• Claudio Martin Pereira de Pereira,
• Sidnei Moura,
• Cristiane Storck Schwalm,
• Gleison Antonio Casagrande and
• Lucas Pizzuti

Beilstein J. Org. Chem. 2022, 18, 1079–1087, doi:10.3762/bjoc.18.110

• bendazac [10], the anti-inflammatory agent benzydamine [11], and the antiemetic agent granisetron [12] are commercially available examples. In view of the abovementioned interest, an increasing number of approaches for the synthesis of 1H-indazoles has been recently reported, including 1,3-dipolar

• cycloaddition reaction of α-diazomethylphosphonates with o-(trimethylsilyl)phenyl triflate in the presence of CsF [13], Cu2+-mediated N−N bond formation from ketimines in the presence of oxygen [14], Pd2+-mediated oxidative benzannulation from pyrazoles and internal alkynes [15], Pd-catalyzed Aza–Nenitzescu

Synthesis of bis-spirocyclic derivatives of 3-azabicyclo[3.1.0]hexane via cyclopropene cycloadditions to the stable azomethine ylide derived from Ruhemann's purple

• Alexander S. Filatov,
• Olesya V. Khoroshilova,
• Anna G. Larina,
• Vitali M. Boitsov and
• Alexander V. Stepakov

Beilstein J. Org. Chem. 2022, 18, 769–780, doi:10.3762/bjoc.18.77

• 1,3-dipolar cycloaddition (1,3-DC) reactions of cyclopropenes to the stable azomethine ylide – protonated form of Ruhemann's purple (PRP) has been developed. Both 3-substituted and 3,3-disubstituted cyclopropenes reacted with PRP, affording the corresponding bis-spirocyclic 3-azabicyclo[3.1.0]hexane

• [15]. In our recent studies, great attention was paid to developing methods for the synthesis of spiro[3-azabicyclo[3.1.0]hexanes] based on 1,3-dipolar cycloaddition reactions involving azomethine ylides and cyclopropene dipolarophiles, and also the in vitro activity of some synthesized compounds has

• been explored [19][20][21][22][23][24]. To generate azomethine ylides, we used a classical method based on the reaction of cyclic carbonyl compounds with α-amino acids. Μono-, bi-, and tetracyclic carbonyl compounds were utilized in these studies. 1,3-Dipolar cycloaddition of cyclopropenes to

Synthesis of 3,4,5-trisubstituted isoxazoles in water via a [3 + 2]-cycloaddition of nitrile oxides and 1,3-diketones, β-ketoesters, or β-ketoamides

• Md Imran Hossain,
• Md Imdadul H. Khan,
• Seong Jong Kim and
• Hoang V. Le

Beilstein J. Org. Chem. 2022, 18, 446–458, doi:10.3762/bjoc.18.47

• , β-ketoesters or β-ketoamides are a commonly used 2-step route to 3,4,5-trisubstituted isoxazoles [24][25]. Xiao Zhou et al. recently reported a direct access to 3,4,5-trisubstituted isoxazoles via an enolate-mediated 1,3-dipolar cycloaddition of β-functionalized ketones with nitrile oxides using

New advances in asymmetric organocatalysis

• Radovan Šebesta

Beilstein J. Org. Chem. 2022, 18, 240–242, doi:10.3762/bjoc.18.28

• disclosed important discoveries with proline and imidazolidinones as ample chiral catalysts for aldol [7][8], Diels–Alder [9], dipolar cycloaddition [10], and Mannich reactions [11]. The organic chemistry community this time took a tremendous interest in this concept, which led to many valuable developments

Anomeric 1,2,3-triazole-linked sialic acid derivatives show selective inhibition towards a bacterial neuraminidase over a trypanosome trans-sialidase

• Peterson de Andrade,
• Sanaz Ahmadipour and
• Robert A. Field

Beilstein J. Org. Chem. 2022, 18, 208–216, doi:10.3762/bjoc.18.24

• broad range of substrates, solvents, and reaction conditions; all these parameters have to be carefully planned to avoid low yields or even no product formation, as previously described for compound 1 [20]. Amongst the vast number of reported procedures, the 1,3-dipolar cycloaddition was performed with

Regioselective synthesis of methyl 5-(N-Boc-cycloaminyl)-1,2-oxazole-4-carboxylates as new amino acid-like building blocks

• Jolita Bruzgulienė,
• Greta Račkauskienė,
• Aurimas Bieliauskas,
• Vaida Milišiūnaitė,
• Miglė Dagilienė,
• Gita Matulevičiūtė,
• Vytas Martynaitis,
• Sonata Krikštolaitytė,
• Frank A. Sløk and
• Algirdas Šačkus

Beilstein J. Org. Chem. 2022, 18, 102–109, doi:10.3762/bjoc.18.11

• -oxazoles are: the 1,3-dipolar cycloaddition of alkenes and alkynes with nitrile oxides, and the reaction of a three-carbon atom component, such as a α,β-unsaturated ketone or a 1,3-diketone with hydroxylamine hydrochloride [33]. Recently, Rosa et al. reported a useful procedure for the synthesis of various

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196