Copper-catalyzed asymmetric sp³ C–H arylation of tetrahydroisoquinoline mediated by a visible light photoredox catalyst

• Pierre Querard,
• Inna Perepichka,
• Eli Zysman-Colman and
• Chao-Jun Li

Beilstein J. Org. Chem. 2016, 12, 2636–2643, doi:10.3762/bjoc.12.260

• interest in terms of atom economy, nevertheless enantioselectivity is difficult to control due to often-required harsh reaction conditions. Therefore, the development of simple and facile processes to functionalize sp3 C–H bonds under mild conditions in the absence of directing groups is of great interest

Catalytic Wittig and aza-Wittig reactions

• Zhiqi Lao and
• Patrick H. Toy

Beilstein J. Org. Chem. 2016, 12, 2577–2587, doi:10.3762/bjoc.12.253

• large scale, in the context of green sustainable chemistry. For example, it has low atom economy due to its requirement of one molar equivalent of a phosphine reagent, and the formation of a corresponding amount of a phosphine oxide, usually Ph3P=O (2). There is also the associated problem of separating

A new protocol for the synthesis of 4,7,12,15-tetrachloro[2.2]paracyclophane

• Donghui Pan,
• Yanbin Wang and
• Guomin Xiao

Beilstein J. Org. Chem. 2016, 12, 2443–2449, doi:10.3762/bjoc.12.237

• the selectivity and allows for the complete utilization of bromine atoms, thus increasing the atom economy [16]. These advantages prompted us to develop a novel method to prepare 1-(bromomethyl)-2,5-dichloro-4-methylbenzene and 4,7,12,15-tetrachloro[2.2]paracyclophane in a convenient and green way

A new paradigm for designing ring construction strategies for green organic synthesis: implications for the discovery of multicomponent reactions to build molecules containing a single ring

• John Andraos

Beilstein J. Org. Chem. 2016, 12, 2420–2442, doi:10.3762/bjoc.12.236

• starting materials to the final desired products. Recently, a measure of the associated probability of achieving reaction intrinsic “greenness” based on simple reaction yield (RY) and atom economy (AE) threshold constraints was advanced [9]. That work demonstrated that both of these metrics, which define

• “intrinsic greenness”, were critical in influencing whether or not chemical reactions could achieve a minimum standard of overall greenness, regardless of how much auxiliary material (solvents, etc.) was used. Optimization toward overall greenness was best achieved by first maximizing atom economy and

• considered as precursors to the desired ring product structure. This allows the attainment of an elite list of “green” options for synthesizing a given target ring structure that satisfies the criteria of “intrinsic” greenness as defined by the inequality conditions imposed on the key metrics atom economy

The weight of flash chromatography: A tool to predict its mass intensity from thin-layer chromatography

• Freddy Pessel,
• Jacques Augé,
• Isabelle Billault and
• Marie-Christine Scherrmann

Beilstein J. Org. Chem. 2016, 12, 2351–2357, doi:10.3762/bjoc.12.228

• sequences from the global material economy GME (Equation 4), which is related to the atom economy, the yields of each step, the excess of reactants and the mass of auxiliaries [6][7]. It can be fractioned into three parts: reaction itself (MIR), work-up (MIW) and purification (MIP) as shown by Equation 5 [8

Tunable microwave-assisted method for the solvent-free and catalyst-free peracetylation of natural products

• Manuela Oliverio,
• Paola Costanzo,
• Monica Nardi,
• Carla Calandruccio,
• Raffaele Salerno and
• Antonio Procopio

Beilstein J. Org. Chem. 2016, 12, 2222–2233, doi:10.3762/bjoc.12.214

• di-glycosylated derivative of quercetin (13), demonstrated that an additional acetylation run could give rise also to a quercetin peracetylation. An evaluation of the greenness of the process was performed by calculation of atom economy (AE), reaction mass efficiency (RME), mass intensity (MI) and

Diels–Alder reactions in confined spaces: the influence of catalyst structure and the nature of active sites for the retro-Diels–Alder reaction

• Ángel Cantín,
• M. Victoria Gomez and
• Antonio de la Hoz

Beilstein J. Org. Chem. 2016, 12, 2181–2188, doi:10.3762/bjoc.12.208

• selectivity and atom economy. Moreover, Diels–Alder cycloadditions in combination with heterogeneous catalysts (i.e. doped-microporous materials) represent an interesting approach for the conversion of biomass feedstock into stable chemicals such as furfural derivatives, platform molecules which can be

The in situ generation and reactive quench of diazonium compounds in the synthesis of azo compounds in microreactors

• Faith M. Akwi and
• Paul Watts

Beilstein J. Org. Chem. 2016, 12, 1987–2004, doi:10.3762/bjoc.12.186

• principles of green chemistry [1][2] such as less hazardous chemical synthesis, efficient atom economy, reduction of waste produced, some alternative cleaner methods for the synthesis of azo dyes have been developed. These methods are however only representative of particular coupling agents and diazotized

• undesirable side reaction, thus increasing the atom economy in the reaction. This in turn reduces the amount of waste generated after the reaction. A reaction conversion of almost 100% was attained in 2.3 seconds. The same reaction performed at a macro scale and at a strong stirring rate providing a

Catalytic Chan–Lam coupling using a ‘tube-in-tube’ reactor to deliver molecular oxygen as an oxidant

• Carl J. Mallia,
• Paul M. Burton,
• Alexander M. R. Smith,
• Gary C. Walter and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2016, 12, 1598–1607, doi:10.3762/bjoc.12.156

• protocols it is clear that the use of sub-stoichiometric amounts of the copper catalysts presents an advantage over the stoichiometric amount used in the original flow studies [13]. Additionally, the use of oxygen as the oxidant offers improved atom economy over the use of systems such as TEMPO and tert

One-pot synthesis of tetracyclic fused imidazo[1,2-a]pyridines via a three-component reaction

• Bo Yang,
• Chuanye Tao,
• Taofeng Shao,
• Jianxian Gong and
• Chao Che

Beilstein J. Org. Chem. 2016, 12, 1487–1492, doi:10.3762/bjoc.12.145

• Multicomponent reactions (MCRs) have attracted considerable attention in organic and medicinal chemistry due to their high efficiency, simple operability, atom economy and unmatched versatility [1][2][3][4][5][6]. Especially, these reactions serve as an ideal synthetic tool for the assembly of structurally

Development of chiral metal amides as highly reactive catalysts for asymmetric [3 + 2] cycloadditions

• Yasuhiro Yamashita,
• Susumu Yoshimoto,
• Mark J. Dutton and
• Shū Kobayashi

Beilstein J. Org. Chem. 2016, 12, 1447–1452, doi:10.3762/bjoc.12.140

• biologically active compounds are particularly important. Chiral Lewis acid/Brønsted base-catalyzed carbon–carbon bond-forming reactions are one of the most efficient methods from the viewpoint of atom economy because only proton transfer occurs between starting materials and target products [2]. Several kinds

A quadruple cascade protocol for the one-pot synthesis of fully-substituted hexahydroisoindolinones from simple substrates

• Hong-Bo Zhang,
• Yong-Chun Luo,
• Xiu-Qin Hu,
• Yong-Min Liang and
• Peng-Fei Xu

Beilstein J. Org. Chem. 2016, 12, 253–259, doi:10.3762/bjoc.12.27

• one-pot cascade quadruple protocol features readily available starting materials, simple manipulation, mild conditions and good atom economy. Keywords: bifunctional catalysis; hexahydroisoindolinones; one-pot synthesis; quadruple cascade; Introduction Isoindolines and their congeners are one kind of

Organocatalytic and enantioselective Michael reaction between α-nitroesters and nitroalkenes. Syn/anti-selectivity control using catalysts with the same absolute backbone chirality

• Jose I. Martínez,
• Uxue Uria,
• Maria Muñiz,
• Efraím Reyes,
• Luisa Carrillo and
• Jose L. Vicario

Beilstein J. Org. Chem. 2015, 11, 2577–2583, doi:10.3762/bjoc.11.277

• arises as a key methodology for chemical production of enantiomerically enriched chiral compounds in terms of atom economy and reduced waste generation [2][3][4][5][6]. Nowadays, many very effective methodologies exist that allow the formation of a chiral compound as a single enantiomer. However, and

Continuous formation of N-chloro-N,N-dialkylamine solutions in well-mixed meso-scale flow reactors

• A. John Blacker and
• Katherine E. Jolley

Beilstein J. Org. Chem. 2015, 11, 2408–2417, doi:10.3762/bjoc.11.262

• added to reactions [3][17], however, it has a low atom economy, poor economics, and requires separation of the succinimide byproduct [18]. The tert-butyl hypochlorite (t-BuOCl) reagent is also used regularly, but is similarly expensive, wasteful and hazardous [14][19][20][21]. On the other hand sodium

• literature batch procedures. The atom economy of our process was increased compared to the use of N-chlorosuccinimide [3], or NaOCl/t-BuOH, Table 3, entries 2 and 3 [20]. There are also improvements to the total mass intensity of the flow procedure, primarily by avoiding work-up and purification procedures

Profluorescent substrates for the screening of olefin metathesis catalysts

• Raphael Reuter and
• Thomas R. Ward

Beilstein J. Org. Chem. 2015, 11, 1886–1892, doi:10.3762/bjoc.11.203

• functional groups and its atom economy [4]. Chemists treasure its extraordinary versatility. From the production of polymers [5][6] and petrochemicals to the synthesis of complex natural products [7], olefin metathesis has been established as a useful tool for solving numerous synthetic challenges. In more

Influence of bulky yet flexible N-heterocyclic carbene ligands in gold catalysis

• Alba Collado,
• Scott R. Patrick,
• Danila Gasperini,
• Sebastien Meiries and
• Steven P. Nolan

Beilstein J. Org. Chem. 2015, 11, 1809–1814, doi:10.3762/bjoc.11.196

• atom economy. A number of gold complexes have been shown to be active in this transformation [51][52][53][54][55][56][57][58]. Much effort has been devoted to the development of more sustainable gold-promoted protocols and several advances have been made in this field, e.g., very low catalyst loadings

• be efficient catalysts in this transformation [52][59][60] which proceeds with 100% atom economy. In addition, previous findings showed that the digold complex, [{Au(NHC)}2(μ-OH)][BF4], bearing IPent was more efficient than the IPr analogue in this reaction [52]. This result encouraged us to test the

The synthesis of active pharmaceutical ingredients (APIs) using continuous flow chemistry

• Marcus Baumann and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2015, 11, 1194–1219, doi:10.3762/bjoc.11.134

• -up with a productivity of 70 g fanetizole (87) in 7 h. In 2013 the Jamison group reported the flow synthesis of the important H1-antagonist diphenhydramine·HCl (92) showcasing the potential of modern flow chemistry to adhere to green chemistry principles (minimal use of organic solvents, atom economy

Hydrogenation of unactivated enamines to tertiary amines: rhodium complexes of fluorinated phosphines give marked improvements in catalytic activity

• Sergey Tin,
• Tamara Fanjul and
• Matthew L. Clarke

Beilstein J. Org. Chem. 2015, 11, 622–627, doi:10.3762/bjoc.11.70

• require quite different ligands to those needed for enamide hydrogenation. From a synthetic perspective, large scale reduction processes generally prefer the use of hydrogen gas to any other reductant, since it potentially saves on cost, waste, atom-economy, solvent and water use; the catalysts identified

Electrocarboxylation: towards sustainable and efficient synthesis of valuable carboxylic acids

• Roman Matthessen,
• Jan Fransaer,
• Koen Binnemans and
• Dirk E. De Vos

Beilstein J. Org. Chem. 2014, 10, 2484–2500, doi:10.3762/bjoc.10.260

• current is used more efficiently and a high atom economy is achievable [35]. The latter being the fraction of the molecular mass of all reactants which is transferred to the desired product(s). In Scheme 5, the total atom efficiency is 100% and the electrochemical yield reaches 180% [34]. Moreover

• yields of the C5:C6:C10 product mixture, with C6 as the main product (Table 1, entry 7) [44]. The anodic reaction produces CO2 which can directly be used as reactant at the cathode (Scheme 8), sustaining the atom economy of the process. This way, however, there is no net incorporation of gaseous CO2 into

• when using a sacrificial anode [146]. The major downside in carboxylating organic halides is the release of halides in the system, which can moreover induce a significant number of side reactions in a non-sacrificial setup, and which is in any case disadvantageous for the atom economy. Innovative

A small azide-modified thiazole-based reporter molecule for fluorescence and mass spectrometric detection

• Stefanie Wolfram,
• Hendryk Würfel,
• Stefanie H. Habenicht,
• Christine Lembke,
• Phillipp Richter,
• Eckhard Birckner,
• Rainer Beckert and
• Georg Pohnert

Beilstein J. Org. Chem. 2014, 10, 2470–2479, doi:10.3762/bjoc.10.258

• to minimize the structural complexity of the fluorophores to achieve higher atom economy and reduce the interaction with biomacromolecules. In this context it was critical to realize that the thiazole moiety itself can also act as a fluorophore, especially the class of 4-hydroxythiazoles [4][5]. 4

Synthesis of α-amino amidines through molecular iodine-catalyzed three-component coupling of isocyanides, aldehydes and amines

• Praveen Reddy Adiyala,
• D. Chandrasekhar,
• Jeevak Sopanrao Kapure,
• Chada Narsimha Reddy and
• Ram Awatar Maurya

Beilstein J. Org. Chem. 2014, 10, 2065–2070, doi:10.3762/bjoc.10.214

• the synthesis of α-amino amidines has been developed using a molecular iodine-catalyzed three-component coupling reaction of isocyanides, amines, and aldehydes. The presented strategy offers the advantages of mild reaction conditions, low environmental impact, clean and simple methodology, high atom

• economy, wide substrate scope and high yields. Keywords: α-amino amidines; iodine; isocyanide; multicomponent reaction; Ugi reaction; Introduction Amidines are a class of organic compounds exhibiting a variety of biological activity that makes them potential candidates for drug development and discovery

Pd/C-catalyzed aerobic oxidative esterification of alcohols and aldehydes: a highly efficient microwave-assisted green protocol

• Marina Caporaso,
• Giancarlo Cravotto,
• Spyros Georgakopoulos,
• George Heropoulos,
• Katia Martina and
• Silvia Tagliapietra

Beilstein J. Org. Chem. 2014, 10, 1454–1461, doi:10.3762/bjoc.10.149

• Selective oxidations of alcohols are some of the most important transformations in organic synthesis. Therefore, reactions that employ reusable heterogeneous catalysts and molecular oxygen are highly desirable from atom economy and environmental impact point of view [1][2][3]. A number of methods have been

Rasta resin–triphenylphosphine oxides and their use as recyclable heterogeneous reagent precursors in halogenation reactions

• Xuanshu Xia and
• Patrick H. Toy

Beilstein J. Org. Chem. 2014, 10, 1397–1405, doi:10.3762/bjoc.10.143

• ; polymer-supported reagent; rasta resin; triphenylphosphine oxide; Introduction One of the major drawbacks of the Wittig [1] and Mitsunobu [2][3] reactions is that they result in the formation of a stoichiometric quantity of triphenylphosphine oxide (1) as a byproduct. From an atom economy perspective

Hindered aryl bromides for regioselective palladium-catalysed direct arylation at less favourable C5-carbon of 3-substituted thiophenes

• Rongwei Jin,
• Charles Beromeo Bheeter and
• Henri Doucet

Beilstein J. Org. Chem. 2014, 10, 1239–1245, doi:10.3762/bjoc.10.123

• different aryl units. Keywords: aryl bromides; atom economy; C–H bond activation; palladium; regioselectivity; thiophenes; Introduction As thiophenes bearing aryl substituents are known to be present in several bioactive molecules and are used as precursors of materials, the regioselective introduction of

Homogeneous and heterogeneous photoredox-catalyzed hydroxymethylation of ketones and keto esters: catalyst screening, chemoselectivity and dilution effects

• Axel G. Griesbeck and
• Melissa Reckenthäler

Beilstein J. Org. Chem. 2014, 10, 1143–1150, doi:10.3762/bjoc.10.114

• product without the need of sacrificial components. The latter process proceeds with a high degree of atom economy [16]. We have recently demonstrated this for the azido-hydroperoxidation of alkenes, a convenient method for the synthesis of 1,2-amino alcohols [17][18]. In the field of C–C coupling