Hypervalent iodine-mediated Ritter-type amidation of terminal alkenes: The synthesis of isoxazoline and pyrazoline cores

• Sang Won Park,
• Soong-Hyun Kim,
• Jaeyoung Song,
• Ga Young Park,
• Darong Kim,
• Tae-Gyu Nam and
• Ki Bum Hong

Beilstein J. Org. Chem. 2018, 14, 1028–1033, doi:10.3762/bjoc.14.89

• Innovation Foundation (DGMIF), 80 Cheombok-ro, Dong-gu, Daegu, Republic of Korea 10.3762/bjoc.14.89 Abstract Hypervalent iodine-mediated olefin functionalization provides a rapid gateway towards accessing both various heterocyclic cores and functional groups. In this regard, we have developed a Ritter-type

• . Keywords: amido-amidation; hypervalent iodine; isoxazoline; metal-free; oxyamidation; pyrazoline; Introduction Isoxazoline and pyrazoline-containing heterocycles are abundant in natural products and biologically active molecules [1][2][3][4][5]. Thus, these scaffolds are also important from the standpoint

• , diverse halonium sources have been utilized for the synthesis of isoxazolines via halocyclization. Furthermore, transition metal-, visible light, and hypervalent iodine-mediated oxidative cyclization protocols provide isoxazoline backbones bearing diverse substituents such as –SR, -CF3, -OH and halogens

Fluorocyclisation via I(I)/I(III) catalysis: a concise route to fluorinated oxazolines

• Felix Scheidt,
• Christian Thiehoff,
• Gülay Yilmaz,
• Stephanie Meyer,
• Constantin G. Daniliuc,
• Gerald Kehr and
• Ryan Gilmour

Beilstein J. Org. Chem. 2018, 14, 1021–1027, doi:10.3762/bjoc.14.88

• ; cyclisation; fluorination; gauche effect; hypervalent iodine; oxazolines; Introduction Marine and terrestrial natural product bioprospecting has established a broad spectrum of structurally complex, bioactive metabolites containing the venerable 2-oxazoline unit [1][2]. This diversity is exemplified by the

Preparation, structure, and reactivity of bicyclic benziodazole: a new hypervalent iodine heterocycle

• Akira Yoshimura,
• Michael T. Shea,
• Cody L. Makitalo,
• Melissa E. Jarvi,
• Gregory T. Rohde,
• Akio Saito,
• Mekhman S. Yusubov and
• Viktor V. Zhdankin

Beilstein J. Org. Chem. 2018, 14, 1016–1020, doi:10.3762/bjoc.14.87

• ; biheterocycles; hypervalent iodine; iodine; oxidatively assisted esterification; Introduction In recent years, the interest in heterocyclic organohypervalent iodine compounds has experienced an unprecedented growth [1][2][3][4][5][6]. A variety of new hypervalent iodine heterocycles have been prepared, and

• numerous reactions employing these compounds as reagents for organic synthesis have been reported. The benziodoxole-based five-membered iodine heterocycles represent a particularly important class of hypervalent iodine(III) reagents. Substituted benziodoxoles 1 (Scheme 1a) are commonly employed as

• and peptides [23][24][25]. Numerous examples of five-membered hypervalent iodine(III) heterocycles containing other than oxygen heteroatoms, such as sulfur [26], boron [27][28], phosphorous [29], or nitrogen [30][31][32], have been synthesized and characterized by X-ray crystallography. In particular

Cross-coupling of dissimilar ketone enolates via enolonium species to afford non-symmetrical 1,4-diketones

• Keshaba N. Parida,
• Gulab K. Pathe,
• Shimon Maksymenko and
• Alex M. Szpilman

Beilstein J. Org. Chem. 2018, 14, 992–997, doi:10.3762/bjoc.14.84

• of enolates may be used to form the 1,4-diketone products in 38 to 74% yield. Due to the use of two TMS enol ethers as precursors, an optimization of the cross-coupling should include investigating the order of addition. Keywords: 1,4-diketones; enolates; enolonium species; hypervalent iodine

• -coupling by using cerium(IV) as a one-electron oxidant [11]. Importantly for the discussion of the present work, Wirth’s strategy relied on a hypervalent iodine [13][14][15] mediated oxidative cross-coupling. Although these processes add a further step to the process, carrying out the cross-coupling in an

2-Iodo-N-isopropyl-5-methoxybenzamide as a highly reactive and environmentally benign catalyst for alcohol oxidation

• Takayuki Yakura,
• Tomoya Fujiwara,
• Akihiro Yamada and
• Hisanori Nambu

Beilstein J. Org. Chem. 2018, 14, 971–978, doi:10.3762/bjoc.14.82

• fundamental and frequently used transformation in organic synthesis. Heavy metal-based oxidants such as chromium(VI), lead(IV), and mercury(II) have been extensively used for this purpose for a long time. However, these oxidants are highly toxic and produce hazardous waste. Recently, hypervalent iodine

• iodobenzene and 4-iodobenzenesulfonic acid (12) as catalysts [58][59]. As part of our study on the development of multifunctionalized organocatalysts based on hypervalent iodine chemistry [60][61][62][63][64][65][66], we found that N-isopropyl-2-iodobenzamide (13), when utilized as a catalyst with Oxone® at

• the formation of the pentavalent iodine species from the corresponding trivalent iodine species might be the rate-determining step in the catalytic hypervalent iodine oxidation of 17 [70]. On the basis of the above results, a plausible mechanism for the oxidation catalyzed by the 2-iodobenzamides is

One-pot synthesis of diaryliodonium salts from arenes and aryl iodides with Oxone–sulfuric acid

• Natalia Soldatova,
• Pavel Postnikov,
• Olga Kukurina,
• Viktor V. Zhdankin,
• Akira Yoshimura,
• Thomas Wirth and
• Mekhman S. Yusubov

Beilstein J. Org. Chem. 2018, 14, 849–855, doi:10.3762/bjoc.14.70

• Diaryliodonium salts, which are also known as diaryl-λ3-iodanes, are widely considered to be an important and practically useful class of hypervalent iodine compounds [1][2][3][4]. Diaryliodonium salts have found broad synthetic application as electrophilic arylating reagents in reactions with various

• based on the use of inexpensive, commercially available oxidants is an important and challenging goal. A vast majority of existing procedures involve the interaction of electrophilic hypervalent iodine(III) species with suitable arenes through ligand exchange processes [16][17][18][19][20]. The reactive

• hypervalent iodine(III) species can be used as stable reagents or can be generated in situ [21][22][23][24][25]. In particular, Olofsson and co-workers reported procedures based on the in situ generation of reactive λ3-iodane species directly from arenes, which was a significant achievement in this field [26

Chlorination of phenylallene derivatives with 1-chloro-1,2-benziodoxol-3-one: synthesis of vicinal-dichlorides and chlorodienes

• Zhensheng Zhao and
• Graham K. Murphy

Beilstein J. Org. Chem. 2018, 14, 796–802, doi:10.3762/bjoc.14.67

• regioselective reaction of aryl- and α-substituted phenylallenes with the hypervalent iodine (HVI) reagent 1-chloro-1,2-benziodoxol-3-one. The reaction typically results in vicinal dichlorides, except with proton-containing α-alkyl substituents, which instead give chlorinated dienes as the major product

• . Experimental evidence suggests that a radical mechanism is involved. Keywords: allene; chlorination; hypervalent iodine; synthetic methods; vinyl chloride; Introduction Organochlorine compounds are vital as polymer precursors [1], as pharmaceuticals [2][3] and agrochemicals [4][5][6] and as functional

• vicinal-dichlorination of phenylallenes; however, no such chlorination reaction has yet been achieved [29][30][31][32][33][34]. Recent reports of reactions between hypervalent iodine reagents and phenylallenes have highlighted the possible product outcomes achievable through ionic and radical reaction

Enantioselective dioxytosylation of styrenes using lactate-based chiral hypervalent iodine(III)

• Morifumi Fujita,
• Koki Miura and
• Takashi Sugimura

Beilstein J. Org. Chem. 2018, 14, 659–663, doi:10.3762/bjoc.14.53

• Morifumi Fujita Koki Miura Takashi Sugimura Graduate School of Material Science, University of Hyogo, Kohto, Kamigori, Hyogo 678-1297, Japan 10.3762/bjoc.14.53 Abstract A series of optically active hypervalent iodine(III) reagents prepared from the corresponding (R)-2-(2-iodophenoxy)propanoate

• derivative was employed for the asymmetric dioxytosylation of styrene and its derivatives. The electrophilic addition of the hypervalent iodine(III) compound toward styrene proceeded with high enantioface selectivity to give 1-aryl-1,2-di(tosyloxy)ethane with an enantiomeric excess of 70–96% of the (S

• )-isomer. Keywords: 1,2-difunctionalization of alkenes; enantioselective synthesis; hypervalent iodine; oxidation; Findings Hypervalent aryl-λ3-iodanes have been widely used for metal-free oxidation with high selectivity in organic synthesis [1][2][3]. The reactivity of an aryl-λ3-iodane is controlled by

Synthesis of fluoro-functionalized diaryl-λ³-iodonium salts and their cytotoxicity against human lymphoma U937 cells

• Prajwalita Das,
• Etsuko Tokunaga,
• Hidehiko Akiyama,
• Hiroki Doi,
• Norimichi Saito and
• Norio Shibata

Beilstein J. Org. Chem. 2018, 14, 364–372, doi:10.3762/bjoc.14.24

• )phenyl)iodonium exhibited the greatest potency in vitro against U937 cells. Evaluation of the cytotoxicity of selected phenylaryl-λ3-iodonium salts against AGLCL (a normal human B cell line) was also examined. Keywords: biological activity; diaryliodonium salt; fluorine; hypervalent iodine; lymphoma

• compounds in the pharmaceutical history indicates that some of these reagents have a heterocyclic skeleton which makes them suitable as drug candidates [29][30][31][32]. Among these compounds, our group is interested in investigating the biological activity of hypervalent iodine-type reagents [33

• ]. Hypervalent iodine compounds have been receiving a lot of attention lately due to their varied applications in organic synthesis [33][34][35][36][37][38][39][40]. A wide range of bioactive compounds make use of diaryliodonium reagents as a part of their synthesis [41][42][43]. On the other hand, there are

Diels–Alder cycloadditions of N-arylpyrroles via aryne intermediates using diaryliodonium salts

• Huangguan Chen,
• Jianwei Han and
• Limin Wang

Beilstein J. Org. Chem. 2018, 14, 354–363, doi:10.3762/bjoc.14.23

• coupling for pyrroles using a hypervalent iodine reagent and a stabilizer for pyrrolyliodonium intermediates (Scheme 1c) [9]. The reactions readily provided a variety of desired coupling products in good yields. In general, the mechanism of these arylations was postulated by generating aryl radicals with

Progress in copper-catalyzed trifluoromethylation

• Guan-bao Li,
• Chao Zhang,
• Chun Song and
• Yu-dao Ma

Beilstein J. Org. Chem. 2018, 14, 155–181, doi:10.3762/bjoc.14.11

• -membered-ring transition state. Note that the presence of an olefin moiety in the product promised further conversion to other types of CF3-containing molecules. Later, the group of Wang [50] employed cheap copper chloride as the catalyst and a hypervalent iodine(III) reagent 1j as both the oxidant and the

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation and chlorination. Part 2: Use of CF₃SO₂Cl

• Hélène Chachignon,
• Hélène Guyon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2800–2818, doi:10.3762/bjoc.13.273

• -cyanotrifluoromethylations [22] of alkenes under photoredox catalysis. These reactions proceeded through a formyl or a cyano group migration triggered by the addition of the trifluoromethyl radical onto the alkene moiety. Both methodologies were developed using Togni’s hypervalent iodine reagent as the CF3 source, but it

• introduction of the CF3 moiety on enol acetates (Scheme 29) [37]. Anecdotally, CF3SO2Cl was evaluated for the trifluoromethylation of allylsilanes, but, disappointingly, gave lower yields than Togni’s hypervalent iodine reagent [38]. More recently, Balaraman and co-workers studied extensively the reaction of β

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation. Part 1: Use of CF₃SO₂Na

• Hélène Guyon,
• Hélène Chachignon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2764–2799, doi:10.3762/bjoc.13.272

• , CF3H, as an ideal source of trifluoromethide offered new horizons for atom-economical, low-cost trifluoromethylation reactions. With regard to electrophilic CF3 donors, S-(trifluoromethyl)sulfonium salts developed by Yagupolskii and Umemoto and hypervalent iodine(III)-CF3 reagents developed by Togni

• reactions with K2S2O8, I2O5 or a hypervalent iodine reagent, and (iii) photochemical activation. Most of the works concerned cascade intramolecular reactions in which a C–C bond is formed after the initial trifluoromethylation. Therefore, Lipshutz and co-workers reported a copper-catalysed intramolecular

• persulfate by hypervalent iodine oxidants such as iodobenzene diacetate (PIDA, Scheme 28) [49], or iodobenzene bis(trifluoroacetate) (PIFA) [50]. Fu and co-workers proposed the reaction mechanism depicted in Scheme 28. PIDA reacted with CF3SO2Na under heating conditions to produce two radicals: CF3• along

One-pot three-component route for the synthesis of S-trifluoromethyl dithiocarbamates using Togni’s reagent

• Azim Ziyaei Halimehjani,
• Martin Dračínský and
• Petr Beier

Beilstein J. Org. Chem. 2017, 13, 2502–2508, doi:10.3762/bjoc.13.247

• been reported to introduce the trifluoromethyl group in organic structures including nucleophilic, electrophilic, radical and transition metal-mediated trifluoromethylations. Among the electrophilic trifluoromethylation methods, reagents based on hypervalent iodine (Togni's reagents I and II, Scheme 1b

Syntheses, structures, and stabilities of aliphatic and aromatic fluorous iodine(I) and iodine(III) compounds: the role of iodine Lewis basicity

• Tathagata Mukherjee,
• Soumik Biswas,
• Andreas Ehnbom,
• Subrata K. Ghosh,
• Ibrahim El-Zoghbi,
• Nattamai Bhuvanesh,
• Hassan S. Bazzi and
• John A. Gladysz

Beilstein J. Org. Chem. 2017, 13, 2486–2501, doi:10.3762/bjoc.13.246

• probed by DFT calculations. Keywords: chlorination; copper mediated perfluoroalkylation; crystal structure; DFT calculations; fluorous; hypervalent iodine; nucleophilic substitution; polar space group; Introduction A number of fluorous alkyl iodides, usually of the formula RfnCH2CH2I or RfnI (Rfn = CF3

• to alkenes [7][8]. In previous papers, we have reported convenient preparations of a variety of fluorous alkyl iodides [13][14][15], aryl iodides [16][17], and hypervalent iodine(III) derivatives [16][17][18][19]. The latter have included aliphatic iodine(III) bis(trifluoroacetates) [18][19] and

Difunctionalization of alkenes with iodine and tert-butyl hydroperoxide (TBHP) at room temperature for the synthesis of 1-(tert-butylperoxy)-2-iodoethanes

• Hao Wang,
• Cui Chen,
• Weibing Liu and
• Zhibo Zhu

Beilstein J. Org. Chem. 2017, 13, 2023–2027, doi:10.3762/bjoc.13.200

• light [19][20], hypervalent iodine reagents [21][22], acids [23], organoammonium iodides [24] and iodine [25]. These catalysts are often employed in combination with a peroxide and generally produce an organoperoxide. Organic peroxides are important and useful compounds because of their unique chemical

Iodoarene-catalyzed cyclizations of N-propargylamides and β-amidoketones: synthesis of 2-oxazolines

• Somaia Kamouka and
• Wesley J. Moran

Beilstein J. Org. Chem. 2017, 13, 1823–1827, doi:10.3762/bjoc.13.177

• cyclization of N-propargylamides and the second involves the cyclization of β-amidoketones. These are proposed to proceed through different mechanisms and have different substrate scopes. Keywords: amides; catalysis; cyclization; hypervalent iodine; isoxazolines; Introduction Hypervalent iodine reagents are

• ][26][27][28][29]. Saito and co-workers have reported the cyclization of propargylamides to form oxazoles rather than oxazolines under stoichiometric and, more recently, catalytic hypervalent iodine conditions [30][31]. Various other methods for the cyclization of unsaturated amides have been reported

• of hypervalent iodine in catalytic procedures. Studies concerning the elucidation of reaction mechanisms are ongoing and will be reported in due course. Experimental General procedure for 2-iodoanisole-catalyzed cyclization of N-propargylamide 4 or β-amidoketone 5: Propargylamide 4 (1 equiv) or β

Chiral phase-transfer catalysis in the asymmetric α-heterofunctionalization of prochiral nucleophiles

• Johannes Schörgenhumer,
• Maximilian Tiffner and
• Mario Waser

Beilstein J. Org. Chem. 2017, 13, 1753–1769, doi:10.3762/bjoc.13.170

• investigated the phase-transfer catalysed α-cyanation of ketoesters 1 using hypervalent iodine-based cyanide transfer reagents [97]. Hereby we observed the in situ oxidation of the PTC counter anions (Br− or I−) and subsequent α-halogenation of 1. We tried to employ and optimise this procedure, but without any

• alkaloid-based organocatalysts to carry out the α-trifluoromethylthiolation of β-ketoesters 1 by using the hypervalent iodine-based CF3S-transfer reagent 36 in an asymmetric fashion. Very interestingly, they realized that for indanone-based ketoesters 1 (with n = 1) simple cinchona alkaloids themselves

Oxidative dehydrogenation of C–C and C–N bonds: A convenient approach to access diverse (dihydro)heteroaromatic compounds

• Santanu Hati,
• Ulrike Holzgrabe and
• Subhabrata Sen

Beilstein J. Org. Chem. 2017, 13, 1670–1692, doi:10.3762/bjoc.13.162

• tryptophan derivatives with appropriate aldehydes. A hypervalent iodine reagent, iodobenzene diacetate was used in stoichiometric quantities to facilitate both oxidative decarboxylation/dehydrogenation of 108–110 to afford the desired natural products 111–113 (Scheme 42). Conclusion Substantial amount of

Transition-metal-free one-pot synthesis of alkynyl selenides from terminal alkynes under aerobic and sustainable conditions

• Adrián A. Heredia and
• Alicia B. Peñéñory

Beilstein J. Org. Chem. 2017, 13, 910–918, doi:10.3762/bjoc.13.92

• for their synthesis have been developed. Among them are reactions between lithium or sodium acetylides and electrophilic selenium reactants [23]. The use of hypervalent iodine(III) species [24] or alkynyl bromides with RSeLi [25] as nucleophilic selenium species or the reaction of alkynyl bromides

Selective and eco-friendly procedures for the synthesis of benzimidazole derivatives. The role of the Er(OTf)₃ catalyst in the reaction selectivity

• Natividad Herrera Cano,
• Jorge G. Uranga,
• Mónica Nardi,
• Antonio Procopio,
• Daniel A. Wunderlin and
• Ana N. Santiago

Beilstein J. Org. Chem. 2016, 12, 2410–2419, doi:10.3762/bjoc.12.235

• benzaldehyde and o-phenylenediamine to obtain 2-phenyl-1H-benzimidazole (1a) are known. However, they afforded moderate yields requiring longer reaction times in the presence of air (Table 1, entries 27 and 28) [38][39]. Product 1a was also obtained in a shorter reaction time using hypervalent iodine as

Gold-catalyzed direct alkynylation of tryptophan in peptides using TIPS-EBX

• Gergely L. Tolnai,
• Jonathan P. Brand and
• Jerome Waser

Beilstein J. Org. Chem. 2016, 12, 745–749, doi:10.3762/bjoc.12.74

• is highly attractive, but the use of a carbon linker is usually required. Herein, we report the gold-catalyzed direct alkynylation of tryptophan in peptides using the hypervalent iodine reagent TIPS-EBX (1-[(triisopropylsilyl)ethynyl]-1,2-benziodoxol-3(1H)-one). The reaction proceeded in 50–78% yield

• under mild conditions and could be applied to peptides containing other nucleophilic and aromatic amino acids, such as serine, phenylalanine or tyrosine. Keywords: alkynes; C–H functionalization; gold catalysis; hypervalent iodine; peptides; Introduction Alkynes have always been important building

• the Sonogashira reaction, which requires modified non-natural amino acids [32][33]. In 2013, our group reported the alkynylation of thiols using the hypervalent iodine reagent TIPS-EBX (1a, 1-[(triisopropylsilyl)ethynyl]-1,2-benziodoxol-3(1H)-one) (Scheme 1A) [34]. The reaction was almost

Copper-catalyzed intermolecular oxyamination of olefins using carboxylic acids and O-benzoylhydroxylamines

• Brett N. Hemric and
• Qiu Wang

Beilstein J. Org. Chem. 2016, 12, 22–28, doi:10.3762/bjoc.12.4

• olefins with a tethered amino or oxygen functionality has been achieved for the construction of a variety of 1,2-oxyamino products, using palladium [19][20], platinum [21], gold [22], copper [23][24][25][26], free-radical initiators [27][28][29], hypervalent iodine [30], and electrochemical oxidation [31

Pyridylidene ligand facilitates gold-catalyzed oxidative C–H arylation of heterocycles

• Kazuhiro Hata,
• Hideto Ito,
• Yasutomo Segawa and
• Kenichiro Itami

Beilstein J. Org. Chem. 2015, 11, 2737–2746, doi:10.3762/bjoc.11.295

• such oxidative reaction conditions. For example, triphenylphosphine is easily oxidized to triphenylphosphine oxide by a hypervalent iodine reagent that has been used as an oxidant for gold-catalyzed C–H arylation [69]. Appropriate ligands that are tolerant to the oxidative conditions would offer

The synthesis of active pharmaceutical ingredients (APIs) using continuous flow chemistry

• Marcus Baumann and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2015, 11, 1194–1219, doi:10.3762/bjoc.11.134

• -aryl migration step. This was mediated by a hypervalent iodine reagent, PhI(OAc)2 (13), conducted in trimethyl orthoformate (14, TMOF) and methanol (Scheme 2). The direct saponification of the resulting rearranged methyl ester with an excess of base thus completed the telescoped flow synthesis of

• the existing manufacturing routes which have been highly refined and optimised [49][50][51]. Although modern reagents such as hypervalent iodine and triflic acid represent very valuable additions to the chemists’ repertoire they are also inherently expensive and difficult to source at scale. In