A new synthesis of Tyrian purple (6,6’-dibromoindigo) and its corresponding sulfonate salts

• Holly Helmers,
• Mark Horton,
• Julie Concepcion,
• Jeffrey Bjorklund and
• Nicholas C. Boaz

Beilstein J. Org. Chem. 2026, 22, 167–174, doi:10.3762/bjoc.22.10

• reaction step of this strategy was done with commercially available 3. As shown in Scheme 4A, reaction of 3 with N-bromosuccinimide (NBS) and azobisisobutyronitrile (AIBN) in acetonitrile, as previously described, led to benzylic bromination, but in inconsistent yields [20][21]. Use of 1,3-dibromo-5,5

Circumventing Mukaiyama oxidation: selective S–O bond formation via sulfenamide–alcohol coupling

• Guoling Huang,
• Huarui Zhu,
• Shuting Zhou,
• Wanlin Zheng,
• Fangpeng Liang,
• Zhibo Zhao,
• Yifei Chen and
• Xunbo Lu

Beilstein J. Org. Chem. 2026, 22, 158–166, doi:10.3762/bjoc.22.9

• reactivities of the two diastereomers. Although these findings strongly support the occurrence of a partial kinetic resolution, further kinetic measurements would be required for definitive confirmation. A plausible mechanism is outlined as follows. First, the sulfenamide 1 is oxidatively brominated by N

• -bromosuccinimide to generate a highly electrophilic sulfilimidoyl bromide intermediate R–S(Br)=N–C(O)R’, along with succinimide. The resulting S(IV)–Br species is then attacked by the alcohol 2, and nucleophilic substitution at sulfur followed by proton transfer furnishes the sulfinimidate ester 3 and HBr. The

Halogenated butyrolactones from the biomass-derived synthon levoglucosenone

• Johannes Puschnig,
• Martyn Jevric and
• Ben W. Greatrex

Beilstein J. Org. Chem. 2025, 21, 2297–2301, doi:10.3762/bjoc.21.175

• transfer all three chlorine atoms [32], dichlorinated ketone 10a was obtained in 88% yield following acidic workup. Similarly, treatment of enamine 9a with 3.0 equivalents of N-bromosuccinimide and acidic hydrolysis gave dibrominated material 10b in excellent yield. This procedure is attractive due to the

Enantioselective desymmetrization strategy of prochiral 1,3-diols in natural product synthesis

• Lihua Wei,
• Rui Yang,
• Zhifeng Shi and
• Zhiqiang Ma

Beilstein J. Org. Chem. 2025, 21, 1932–1963, doi:10.3762/bjoc.21.151

• position. Compound 271, prepared from 270 in eight steps, was treated with N-bromosuccinimide (NBS) in a H2O/THF solution to afford lactone 272 in 50% yield. Finally, 272 was converted to stephadiamine (273) in three steps. In 2018, the Garg group completed the total synthesis of akuammiline alkaloids

Recent advances in oxidative radical difunctionalization of N-arylacrylamides enabled by carbon radical reagents

• Jiangfei Chen,
• Yi-Lin Qu,
• Ming Yuan,
• Xiang-Mei Wu,
• Heng-Pei Jiang,
• Ying Fu and
• Shengrong Guo

Beilstein J. Org. Chem. 2025, 21, 1207–1271, doi:10.3762/bjoc.21.98

Synthesis of extended fluorinated tripeptides based on the tetrahydropyridazine scaffold

• Thierry Milcent,
• Pascal Retailleau,
• Benoit Crousse and
• Sandrine Ongeri

Beilstein J. Org. Chem. 2024, 20, 3174–3181, doi:10.3762/bjoc.20.262

• lead to the corresponding hydrazones 6a–d in good yields (69–80%). Surprisingly, these conditions were unsuitable for compounds 5e and 5f and led to the formation of numerous byproducts. Fortunately, the replacement of iodine with N-bromosuccinimide (NBS), previously reported for the oxidation of

Hypervalent iodine-mediated intramolecular alkene halocyclisation

• Charu Bansal,
• Oliver Ruggles,
• Albert C. Rowett and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 3113–3133, doi:10.3762/bjoc.20.258

• and N-bromosuccinimide (NBS), which promoted the intramolecular bromolactonisation of unsaturated acids 68. The authors investigated the oxidation using a variety of ortho-substituted iodobenzenes. Increasing the nucleophilicity of the groups at the ortho-substituted positions of iodobenzene gave

Light on the sustainable preparation of aryl-cored dibromides

• Fabrizio Roncaglia,
• Alberto Ughetti,
• Nicola Porcelli,
• Biagio Anderlini,
• Andrea Severini and
• Luca Rigamonti

Beilstein J. Org. Chem. 2024, 20, 1076–1087, doi:10.3762/bjoc.20.95

• significant importance as reactive building blocks in polymer and materials chemistry. Their preparation primarily relies on established synthetic methods using molecular bromine or N-bromosuccinimide, known for their reliability and effectiveness. However, from a sustainability perspective, these methods

• economy of the overall process. A pertinent example of this technique is represented by the Wohl–Ziegler halogenation protocol, which is based on the stable and easily handled N-bromosuccinimide (NBS), which is able to slowly deliver molecular bromine through its interaction with bromide ions [17][25

Synthesis and biological profile of 2,3-dihydro[1,3]thiazolo[4,5-b]pyridines, a novel class of acyl-ACP thioesterase inhibitors

• Jens Frackenpohl,
• David M. Barber,
• Guido Bojack,
• Birgit Bollenbach-Wahl,
• Ralf Braun,
• Rahel Getachew,
• Sabine Hohmann,
• Kwang-Yoon Ko,
• Karoline Kurowski,
• Bernd Laber,
• Rebecca L. Mattison,
• Thomas Müller,
• Anna M. Reingruber,
• Dirk Schmutzler and
• Andrea Svejda

Beilstein J. Org. Chem. 2024, 20, 540–551, doi:10.3762/bjoc.20.46

• –6.48 (d, 1H), 4.53–4.44 (br s, 2H, NH2). 6-(2-Fluorophenyl)pyridin-2-ylamine (9b, 9.98 g, 52.49 mmol, 1.0 equiv) was dissolved in acetonitrile (140 mL) and cooled to 0 °C. Thereafter, N-bromosuccinimide (20.56 g, 115.49 mmol, 2.2 equiv) was added carefully. The reaction mixture was warmed to room

Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

• acids, such as N-bromosuccinimide (NBS) [54], silica chloride [55], Ph3CCl [56], ZnO [57], La(NO3)3·6H2O [58], V(HSO4)3 [59], Cu(ClO4)2·6H2O [60], Fe/Al pillared clay [61], trimethylsilyl chloride (TMSCl) [62], BiCl3-loaded montmorillonite K10 [63][64][65][66][67], ZrO2-MgO [68] or CaO [69]. Silica gel

Copper-promoted C5-selective bromination of 8-aminoquinoline amides with alkyl bromides

• Changdong Shao,
• Chen Ma,
• Li Li,
• Jingyi Liu,
• Yanan Shen,
• Chen Chen,
• Qionglin Yang,
• Tianyi Xu,
• Zhengsong Hu,
• Yuhe Kan and
• Tingting Zhang

Beilstein J. Org. Chem. 2024, 20, 155–161, doi:10.3762/bjoc.20.14

• brominated imides, such as N-bromosuccinimide (NBS), N-bromosaccharin (NBSA), tribromoisocyanuric acid (TBCA), 1,3-dibromo-5,5-dimethylhydantoin (DBDMH), and so on (Scheme 1, reaction 2) [21][22][23][24]. However, reports on the bromination of C5–H of 8-aminoquinolines employing acyl bromides, alkyl bromides

Thienothiophene-based organic light-emitting diode: synthesis, photophysical properties and application

• Recep Isci and
• Turan Ozturk

Beilstein J. Org. Chem. 2023, 19, 1849–1857, doi:10.3762/bjoc.19.137

• nitrogen flow. Materials 3-Bromothiophene (97%, Across), 2-bromo-4′-methoxyacetophenone (97% Merck), N-bromosuccinimide (Sigma-Aldrich), polyphosphoric acid (PPA, 115% H3PO4 basis, Sigma-Aldrich), n-butyllithium (2.5 M in hexanes, Sigma-Aldrich), sodium sulfate (Merck), 4-bromotriphenylamine (Sigma-Aldrich

Trifluoromethylated hydrazones and acylhydrazones as potent nitrogen-containing fluorinated building blocks

• Zhang Dongxu

Beilstein J. Org. Chem. 2023, 19, 1741–1754, doi:10.3762/bjoc.19.127

• /trifluoromethylated organic molecules is equally attractive and proven to be important. Generally, the reaction of trifluoroacetaldehyde hydrazones with N-chloro- and N-bromosuccinimide is used to prepare trifluoromethylated hydrazonoyl halides (Scheme 8a), or alternatively trichloroisocyanuric acid (TCCA) can be

First synthesis of acylated nitrocyclopropanes

• Kento Iwai,
• Rikiya Kamidate,
• Khimiya Wada,
• Haruyasu Asahara and
• Nagatoshi Nishiwaki

Beilstein J. Org. Chem. 2023, 19, 892–900, doi:10.3762/bjoc.19.67

• our study using ethyl acetoacetate (3c) as starting 1,3-dicarbonyl compound according to method b (Scheme 2). After heating an acetonitrile solution of 3c, N-bromosuccinimide, and p-toluenesulfonic acid [7], α-bromoacetoacetate 6c was isolated with a 44% yield after purification of the reaction

Automated grindstone chemistry: a simple and facile way for PEG-assisted stoichiometry-controlled halogenation of phenols and anilines using N-halosuccinimides

• Dharmendra Das,
• Akhil A. Bhosle,
• Amrita Chatterjee and
• Mainak Banerjee

Beilstein J. Org. Chem. 2022, 18, 999–1008, doi:10.3762/bjoc.18.100

• reaction time, and mild reaction conditions are a few noticeable merits of this environmentally sustainable mechanochemical protocol. Keywords: automated grinding; chemoselectivity; mechanochemistry; N-bromosuccinimide; PEG-400; regioselectivity; stoichiometry-controlled halogenation; Introduction Aryl

• with N-bromosuccinimide (NBS) was carried out in toxic polar solvents (e.g., DMF), but no iodinated or chlorinated products were obtained because of the low reactivity of NIS and NCS (Scheme 1a) [24][25][26][27]. In recent time, the use of Lewis or Brønsted acids, Lewis bases, and transition-metal

• reaction conditions was carried out using p-cresol (1a) as the model substrate with 1.1 equiv of N-bromosuccinimide (NBS) for attempted monobromination. They were ground together at the speed of 100 rpm in an electrical grinder (EG) of Agate-made under neat conditions for 30 min. The reaction was

Introducing a new 7-ring fused diindenone-dithieno[3,2-b:2',3'-d]thiophene unit as a promising component for organic semiconductor materials

• Valentin H. K. Fell,
• Joseph Cameron,
• Alexander L. Kanibolotsky,
• Eman J. Hussien and
• Peter J. Skabara

Beilstein J. Org. Chem. 2022, 18, 944–955, doi:10.3762/bjoc.18.94

• aqueous lithium hydroxide, THF, 4 h, 94% [15]; e) copper powder, quinoline, 230 °C, 1 h, 81% [15]; f) N-bromosuccinimide, CHCl3/glacial acetic acid, 0 °C, 1 h, rt, 1.5 h, 94% [15] ; g) n-BuLi, −90 °C, 20 min, triisopropyl borate, −80 °C, anhydrous THF, rt, overnight, 97% [34]; h) pinacol, toluene, 115 °C

Mechanochemical halogenation of unsymmetrically substituted azobenzenes

• Dajana Barišić,
• Mario Pajić,
• Ivan Halasz,
• Darko Babić and
• Manda Ćurić

Beilstein J. Org. Chem. 2022, 18, 680–687, doi:10.3762/bjoc.18.69

• -halosuccinimide (NXS, X = Br, I) as halogen source [47]. Two years later in 2017, Eslami's group applied a ball-milling method to synthesize aryl bromides and α-bromoketones with N-bromosuccinimide (NBS) and MCM-41-SO3H catalyst and no liquid additives [48]. In 2018, Wang and co-workers developed the ball-milling

• solvent-free synthesis of phenanthridinones via a cascaded oxidative C–N coupling followed by a halogenation reaction [50]. Only recently, our group carried out a detailed synthetic and mechanistic study of the mechanochemical PdII-catalyzed bromination of unsubstituted azobenzene (L1) by N

• -bromosuccinimide (NBS) under neat grinding (NG) and liquid-assisted grinding (LAG) conditions in a ball mill [51]. Insight into the dynamics of the formation of reaction intermediates and products was obtained by in situ Raman monitoring that provided information on the nature of the catalytically active PdII

Cs₂CO₃-Promoted reaction of tertiary bromopropargylic alcohols and phenols in DMF: a novel approach to α-phenoxyketones

• Ol'ga G. Volostnykh,
• Olesya A. Shemyakina,
• Anton V. Stepanov and
• Igor' A. Ushakov

Beilstein J. Org. Chem. 2022, 18, 420–428, doi:10.3762/bjoc.18.44

• bromopropargylic alcohols under the reported conditions. The bromopropargylic alcohols are readily available from acetylenic alcohols and hypobromite [22] or N-bromosuccinimide [23]. The presence of the hydroxy group expands the synthetic potential of these bromoacetylenes. Thus, we have recently demonstrated a

Synthesis of novel [1,2,4]triazolo[1,5-b][1,2,4,5]tetrazines and investigation of their fungistatic activity

• Anna V. Korotina,
• Svetlana G. Tolshchina,
• Rashida I. Ishmetova,
• Natalya P. Evstigneeva,
• Natalya A. Gerasimova,
• Natalya V. Zilberberg,
• Nikolay V. Kungurov,
• Gennady L. Rusinov,
• Oleg N. Chupakhin and
• Valery N. Charushin

Beilstein J. Org. Chem. 2022, 18, 243–250, doi:10.3762/bjoc.18.29

• ) was only 10%. It can be explained by a low stability of the starting tetrazine 2i containing the formamidine moiety, since the latter on heating is easily transformed into the amino group, thus leading to 3-amino-6-(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine. It has been found that N-bromosuccinimide

• formation of difficult-to-separate reaction mixtures with a low content of the target products 3a,b,g, which could not be isolated in a pure form. Heating of tetrazines 2 with N-bromosuccinimide in refluxing acetonitrile without microwave irradiation made it possible to obtain the product 3j in a low yield

Efficient N-arylation of 4-chloroquinazolines en route to novel 4-anilinoquinazolines as potential anticancer agents

• Rodolfo H. V. Nishimura,
• Thiago dos Santos,
• Valter E. Murie,
• Luciana C. Furtado,
• Leticia V. Costa-Lotufo and
• Giuliano C. Clososki

Beilstein J. Org. Chem. 2021, 17, 2968–2975, doi:10.3762/bjoc.17.206

• . While anthranilamide (5) bromination with N-bromosuccinimide in acetonitrile at room temperature [29] furnished 2-amino-5-bromobenzamide (6a) in 78% yield, iodination of 5 with iodine in the presence of hydrogen peroxide in water [30] at 50 °C provided 2-amino-5-iodobenzamide (6b) in 89% yield. After

Synthesis of highly substituted fluorenones via metal-free TBHP-promoted oxidative cyclization of 2-(aminomethyl)biphenyls. Application to the total synthesis of nobilone

• Ilya A. P. Jourjine,
• Lukas Zeisel,
• Jürgen Krauß and
• Franz Bracher

Beilstein J. Org. Chem. 2021, 17, 2668–2679, doi:10.3762/bjoc.17.181

• nitrate (CAN) [41], 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO)/CuCl [51], K2S2O8 [36], dimethyl sulfoxide (DMSO)/O2 [52], PhI(OAc)2/benzoyl peroxide (BPO) [47], Dess-Martin periodinane, N-bromosuccinimide (NBS), N-hydroxyphthalimide (NHPI)/Co(OAc)2/O2 [53], H2O2/tetrabutylammonium iodide (TBAI) [43], CBr4

Silica gel and microwave-promoted synthesis of dihydropyrrolizines and tetrahydroindolizines from enaminones

• Robin Klintworth,
• Garreth L. Morgans,
• Stefania M. Scalzullo,
• Charles B. de Koning,
• Willem A. L. van Otterlo and
• Joseph P. Michael

Beilstein J. Org. Chem. 2021, 17, 2543–2552, doi:10.3762/bjoc.17.170

• the unsubstituted pyrrole position (Scheme 5). This site was readily brominated with N-bromosuccinimide in N,N-dimethylformamide [71] to afford ethyl 7-bromo-6-phenyl-2,3-dihydro-1H-pyrrolizine-5-carboxylate (28) in 83% yield. Palladium(0)-catalyzed Suzuki–Miyaura coupling of 28 with phenylboronic

Advances in mercury(II)-salt-mediated cyclization reactions of unsaturated bonds

• Sumana Mandal,
• Raju D. Chaudhari and
• Goutam Biswas

Beilstein J. Org. Chem. 2021, 17, 2348–2376, doi:10.3762/bjoc.17.153

• with HgCl2 (0.5 equiv) in presence of N-bromosuccinimide (NBS) undergoes cyclization yielding stable bromo alkenes 87 (Scheme 28) [80][81]. Atta et al. reported the specific cyclization of ethynyl phenols 88 in presence of HgCl2 at ambient temperature yielding benzofuran derivatives 89. They had

A novel methodology for the efficient synthesis of 3-monohalooxindoles by acidolysis of 3-phosphate-substituted oxindoles with haloid acids

• Li Liu,
• Yue Li,
• Tiao Huang,
• Dulin Kong and
• Mingshu Wu

Beilstein J. Org. Chem. 2021, 17, 2321–2328, doi:10.3762/bjoc.17.150

• disclosed the application of N-fluorobenzenesulfonimide (NFSI) and NBS (N-bromosuccinimide), respectively, as the halogen sources, with diazoacetamide under catalyst-free conditions via a carbene pathway, which constructed 3-fluorooxindoles and 3-bromooxindoles (Scheme 1, reaction 1) [20][21]. Then, the

Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• due to the formation of dehydropolyazulene via oxidative aromatization. In 2003, Lai and co-workers [20] synthesized 1,3-polyazulene 5 from azulene in two steps as shown in Scheme 3. First, azulene (1) was dibrominated at the 1,3-positions by treatment with N-bromosuccinimide (NBS) and the consequent