Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

The Groebke–Blackburn–Bienaymé reaction in its maturity: innovation and improvements since its 21st birthday (2019–2023)

• Cristina Martini,
• Muhammad Idham Darussalam Mardjan and
• Andrea Basso

Beilstein J. Org. Chem. 2024, 20, 1839–1879, doi:10.3762/bjoc.20.162

• (41–67%). Multicomponent polymerizations are simple and efficient methods to construct a library of polymers with great structural complexity and diversity, including fused-heterocyclic polymers[64]. Tang et al. [65] reported the transition-metal-free multicomponent polymerization of dialdehydes 96a–c

Syntheses and medicinal chemistry of spiro heterocyclic steroids

• Laura L. Romero-Hernández,
• Ana Isabel Ahuja-Casarín,
• Penélope Merino-Montiel,
• Sara Montiel-Smith,
• José Luis Vega-Báez and
• Jesús Sandoval-Ramírez

Beilstein J. Org. Chem. 2024, 20, 1713–1745, doi:10.3762/bjoc.20.152

• -Methylene spirolactones at C-3 11a and 11b derived from dihydrocholesterol and stanolone were also obtained in 41% and 52% yields, respectively (dr > 20:1) (Scheme 3). More recently, a functionalized spiro-β-lactone was obtained via a metal-free procedure involving photoinduced carbene C–H insertion in a

Oxidation of benzylic alcohols to carbonyls using N-heterocyclic stabilized λ³-iodanes

• Thomas J. Kuczmera,
• Pim Puylaert and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2024, 20, 1677–1683, doi:10.3762/bjoc.20.149

• oxidants in combination with transition-metal catalysts. Metal-free methods employ chlorodimethylsulfonium compounds as the reactive species and have gained great popularity under the name Swern oxidation or the Corey–Kim oxidation [11]. Hypervalent iodine compounds have also been studied and are well

Benzylic C(sp³)–H fluorination

• Alexander P. Atkins,
• Alice C. Dean and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 1527–1547, doi:10.3762/bjoc.20.137

• that have an ortho-substituted tert-butylamide moiety. Finally, while not focussing on benzylic substrates, a vanadium-mediated fluorination of aliphatic C–H bonds was reported by Chen and co-workers, which also included five benzylic substrates (Figure 16) [57]. Metal free Numerous reports have

• detailed metal-free radical C(sp3)–H fluorinations suitable for benzylic substrates. These typically involve the generation of a HAT reagent that is selective for benzylic C–H bonds and facilitates the generation of a benzylic radical. Subsequent FAT, from a fluorinating reagent, yields the desired benzyl

Selectfluor and alcohol-mediated synthesis of bicyclic oxyfluorination compounds by Wagner–Meerwein rearrangement

• Ziya Dağalan,
• Muhammed Hanifi Çelikoğlu,
• Saffet Çelik,
• Ramazan Koçak and
• Bilal Nişancı

Beilstein J. Org. Chem. 2024, 20, 1462–1467, doi:10.3762/bjoc.20.129

• selectfluor and a carbocation is formed by bonding with fluorine. Subsequently, fluoroalkoxy compound 4 is formed by Wagner–Meerwein rearrangement followed by alcohol addition and deprotonation. Conclusion New bicyclic fluoroalkoxy compounds were synthesized by a molecular fluorine and metal-free methodology

Synthesis of 4-functionalized pyrazoles via oxidative thio- or selenocyanation mediated by PhICl₂ and NH₄SCN/KSeCN

• Jialiang Wu,
• Haofeng Shi,
• Xuemin Li,
• Jiaxin He,
• Chen Zhang,
• Fengxia Sun and
• Yunfei Du

Beilstein J. Org. Chem. 2024, 20, 1453–1461, doi:10.3762/bjoc.20.128

• oxidant. This metal-free approach was postulated to involve the in situ generation of reactive thio/selenocyanogen chloride (Cl–SCN/SeCN) from the reaction of PhICl2 and NH4SCN/KSeCN, followed by an electrophilic thio/selenocyanation of the pyrazole skeleton. Keywords: PhICl2; pyrazoles; selenocyanation

• , Yotphan and colleagues realized a direct thiocyanation of N-substituted pyrazolones under metal-free conditions [49]. Besides, Choudhury and co-workers developed an additive and metal-free methodology for the C–H thiocyanation of aminopyrazoles, using H2O2 as a benign oxidizing agent (Scheme 1b) [41]. Pan

Generation of alkyl and acyl radicals by visible-light photoredox catalysis: direct activation of C–O bonds in organic transformations

• Mithu Roy,
• Bitan Sardar,
• Itu Mallick and
• Dipankar Srimani

Beilstein J. Org. Chem. 2024, 20, 1348–1375, doi:10.3762/bjoc.20.119

• reduction of xanthates. Under blue-light irradiation, xanthates were reacted with B2cat2 (19) in dimethylacetamide (DMAc), providing the borylated product in decent yield. The methodology was metal-free and did not require conventional heating. Nevertheless, the borylation process was limited to secondary

Rhodium-catalyzed homo-coupling reaction of aryl Grignard reagents and its application for the synthesis of an integrin inhibitor

• Kazuyuki Sato,
• Satoki Teranishi,
• Atsushi Sakaue,
• Yukiko Karuo,
• Atsushi Tarui,
• Kentaro Kawai,
• Hiroyuki Takeda,
• Tatsuo Kinashi and
• Masaaki Omote

Beilstein J. Org. Chem. 2024, 20, 1341–1347, doi:10.3762/bjoc.20.118

• . Therefore, alternative procedures for homo-coupling reactions using other transition-metal catalysts such as palladium, nickel, manganese, and iron have been developed [5][6][7][8][9][10][11][12][13]. In recent years, transition-metal-free coupling reactions have also been developed for environmentally

Oxidative hydrolysis of aliphatic bromoalkenes: scope study and reactivity insights

• Amol P. Jadhav and
• Claude Y. Legault

Beilstein J. Org. Chem. 2024, 20, 1286–1291, doi:10.3762/bjoc.20.111

• metals, inspired by Nature's metalloproteins. However, using toxic and expensive metals is not always practical, making alternative oxidative methodologies more appealing. Enter hypervalent iodine reagents – a leading metal-free choice for oxidation reactions. These robust and low-toxicity reagents have

Mechanistic investigations of polyaza[7]helicene in photoredox and energy transfer catalysis

• Johannes Rocker,
• Till J. B. Zähringer,
• Matthias Schmitz,
• Till Opatz and
• Christoph Kerzig

Beilstein J. Org. Chem. 2024, 20, 1236–1245, doi:10.3762/bjoc.20.106

• underlying reaction mechanism. On the other hand, the relatively high triplet formation quantum yield of Aza-H along with its triplet energy on the order of 2.3 eV permit efficient and metal-free reactions via energy transfer catalysis, as shown for the photosensitized isomerization of stilbene and cinnamyl

Auxiliary strategy for the general and practical synthesis of diaryliodonium(III) salts with diverse organocarboxylate counterions

• Naoki Miyamoto,
• Daichi Koseki,
• Kohei Sumida,
• Elghareeb E. Elboray,
• Naoko Takenaga,
• Ravi Kumar and
• Toshifumi Dohi

Beilstein J. Org. Chem. 2024, 20, 1020–1028, doi:10.3762/bjoc.20.90

• 1,3,5-trimethoxybenzene are highly recommended for chemoselective arylation processes. Aryl(TMP)iodonium(III) salts have been successfully used as transition metal-free arylating reagents for various nucleophiles such as nitrogen- [23][24][25][26], oxygen- [13][27][28][29], sulfur- [30], and carbon- [31

Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

Nucleophilic functionalization of thianthrenium salts under basic conditions

• Xinting Fan,
• Duo Zhang,
• Xiangchuan Xiu,
• Bin Xu,
• Yu Yuan,
• Feng Chen and
• Pan Gao

Beilstein J. Org. Chem. 2024, 20, 257–263, doi:10.3762/bjoc.20.26

• -free conditions. This strategy exhibits good functional-group tolerance, operational simplicity, and an extensive range of compatible substrates. Keywords: amination; functionalization of alcohol; metal-free; S-(alkyl)thianthrenium salts; thioetherification; Introduction Sulfonium salts [1][2][3][4

• the resulting products (3ah–aj) can also be obtained with high efficiency. This underscores the viability of integrating this metal-free thioetherification method with other traditional cross-coupling reactions. Sterically hindered ortho-disubstituted thiophenol 2k is also compatible with this

• investigate simple alkylamines (2s and 2t) as the substrates. In doing so, we could not isolate the corresponding amination products 3as and 3at. To showcase the practical utility of our metal-free thioether formation process, we conducted a 5.0 mmol scale reaction and obtained the target product 3aa in 69

Metal-catalyzed coupling/carbonylative cyclizations for accessing dibenzodiazepinones: an expedient route to clozapine and other drugs

• Amina Moutayakine and
• Anthony J. Burke

Beilstein J. Org. Chem. 2024, 20, 193–204, doi:10.3762/bjoc.20.19

• carbonylative intramolecular cyclization of the intermediate 3a using different catalytic systems. To elucidate the role of the palladium catalyst in this process, we carried out the initial attempt under metal free-conditions using molybdenum hexacarbonyl (Mo(CO)6) as CO surrogate, in the presence of Et3N in

Correction: Synthesis of highly substituted fluorenones via metal-free TBHP-promoted oxidative cyclization of 2-(aminomethyl)biphenyls. Application to the total synthesis of nobilone

• Ilya A. P. Jourjine,
• Lukas Zeisel,
• Jürgen Krauß and
• Franz Bracher

Beilstein J. Org. Chem. 2024, 20, 170–172, doi:10.3762/bjoc.20.16

Copper-promoted C5-selective bromination of 8-aminoquinoline amides with alkyl bromides

• Changdong Shao,
• Chen Ma,
• Li Li,
• Jingyi Liu,
• Yanan Shen,
• Chen Chen,
• Qionglin Yang,
• Tianyi Xu,
• Zhengsong Hu,
• Yuhe Kan and
• Tingting Zhang

Beilstein J. Org. Chem. 2024, 20, 155–161, doi:10.3762/bjoc.20.14

• selective C5-bromination of 8-aminoquinoline amides using carbon tetrabromide and dibromomethane under photo- and electrocatalysis conditions [27][28]. In 2017, Xia and co-workers reported a novel, mild, metal-free, and regioselective bromination of amides, wherein the organic dye eosin Y acted as the

Cycloaddition reactions of heterocyclic azides with 2-cyanoacetamidines as a new route to C,N-diheteroarylcarbamidines

• Pavel S. Silaichev,
• Tetyana V. Beryozkina,
• Vsevolod V. Melekhin,
• Valeriy O. Filimonov,
• Andrey N. Maslivets,
• Vladimir G. Ilkin,
• Wim Dehaen and
• Vasiliy A. Bakulev

Beilstein J. Org. Chem. 2024, 20, 17–24, doi:10.3762/bjoc.20.3

• and Molecules, Department of Chemistry, KU Leuven, Celestijnenlaan 200F, B-3001 Leuven, Belgium 10.3762/bjoc.20.3 Abstract A novel and efficient base-catalyzed, transition-metal-free method for the synthesis of diheterocyclic compounds connected by an amidine linker, including apart from the common

Beyond n-dopants for organic semiconductors: use of bibenzo[d]imidazoles in UV-promoted dehalogenation reactions of organic halides

• Kan Tang,
• Megan R. Brown,
• Chad Risko,
• Melissa K. Gish,
• Garry Rumbles,
• Phuc H. Pham,
• Oana R. Luca,
• Stephen Barlow and
• Seth R. Marder

Beilstein J. Org. Chem. 2023, 19, 1912–1922, doi:10.3762/bjoc.19.142

• bibenzyls being the dominant products. These reaction conditions represent an alternative metal-free approach to the conventional synthesis of bibenzyls through the reaction of Grignard or organolithium reagents with benzyl halides, or to the use of highly active metal reagents [33][34][35][36] or metal

Aromatic systems with two and three pyridine-2,6-dicarbazolyl-3,5-dicarbonitrile fragments as electron-transporting organic semiconductors exhibiting long-lived emissions

• Karolis Leitonas,
• Brigita Vigante,
• Dmytro Volyniuk,
• Audrius Bucinskas,
• Pavels Dimitrijevs,
• Sindija Lapcinska,
• Pavel Arsenyan and
• Juozas Vidas Grazulevicius

Beilstein J. Org. Chem. 2023, 19, 1867–1880, doi:10.3762/bjoc.19.139

• Organic Synthesis, Aizkraukles 21, LV-1006, Riga, Latvia 10.3762/bjoc.19.139 Abstract The pyridine-3,5-dicarbonitrile moiety has gained significant attention in the field of materials chemistry, particularly in the development of heavy-metal-free pure organic light-emitting diodes (OLEDs). Extensive

• pyridine-3,5-dicarbonitrile moiety attracted a great deal of attention in the last decade in the field of materials chemistry, precisely in the development of novel heavy-metal-free pure organic light-emitting diodes (OLEDs). Inexpensive and environmentally friendly emitters are vital for organic

Recent advancements in iodide/phosphine-mediated photoredox radical reactions

• Tinglan Liu,
• Yu Zhou,
• Junhong Tang and
• Chengming Wang

Beilstein J. Org. Chem. 2023, 19, 1785–1803, doi:10.3762/bjoc.19.131

• mechanistic aspects of the reaction and highlighted the potential of the NaI/PPh3 catalytic system for achieving efficient and transition-metal-free photocatalytic transformations. Following that, Li and his research group documented similar results (Scheme 4) [10]. They extensively investigated the

Radical chemistry in polymer science: an overview and recent advances

• Zixiao Wang,
• Feichen Cui,
• Yang Sui and
• Jiajun Yan

Beilstein J. Org. Chem. 2023, 19, 1580–1603, doi:10.3762/bjoc.19.116

• down to 10 ppm [56], which to some extent, solves the problem of metal impurities. Meanwhile, the presence of external stimuli in eATRP, photoATRP, and ultrasonic ATRP, allows spatial and temporal control over the polymerization [57]. Hawker et al. proposed a metal-free ATRP in 2014 using an organic

• mechanism (cf. section 3.2) [86]. 2.3 Metal-free ring opening metathesis polymerization (MF-ROMP) ROMP is a powerful and broadly applicable technique for synthesizing polymers. Traditional ROMP systems are initiated by transition-metal complexes and Ru-based alkylidene complexes, which are also known as

• propagation. However, removing this residue from the product by traditional chromatographic methods can be a challenging task and limits the application of ROMP-produced polymers in biomedical and microelectronic fields [88]. To avoid such drawbacks, the development of a metal-free (MF) procedures is

C–H bond functionalization: recent discoveries and future directions

• Indranil Chatterjee

Beilstein J. Org. Chem. 2023, 19, 1568–1569, doi:10.3762/bjoc.19.114

• its combination with organometallic chemistry for site-selective C−H bond functionalization [3][4]. Recent years have witnessed many viable strategies for the synthesis of complex targets utilizing photoredox catalysis, electroorganic catalysis, Lewis acid catalysis, and transition-metal-free

Morpholine-mediated defluorinative cycloaddition of gem-difluoroalkenes and organic azides

• Tzu-Yu Huang,
• Mario Djugovski,
• Sweta Adhikari,
• Destinee L. Manning and
• Sudeshna Roy

Beilstein J. Org. Chem. 2023, 19, 1545–1554, doi:10.3762/bjoc.19.111

• Tzu-Yu Huang Mario Djugovski Sweta Adhikari Destinee L. Manning Sudeshna Roy Department of BioMolecular Sciences, School of Pharmacy, University of Mississippi, University, MS 38677, USA 10.3762/bjoc.19.111 Abstract Here, we report the first transition-metal-free defluorinative cycloaddition of

• are typically accessed in two ways: (1) direct synthesis using metal or metal-free catalysis and (2) post-functionalization of disubstituted-1,2,3-triazoles [17][18]. The direct synthesis of fully substituted triazoles entails either metal-free carbonyl-based [19][20][21] or metal-mediated and strain

• organic azides in morpholine as a solvent forming C-4-morpholine functionalized fully decorated 1,2,3-triazoles with potential applications in pharmaceutical, biomedical, agrichemical, and materials sciences. This study fills a critical gap in the literature as it is a transition-metal-free and

N-Sulfenylsuccinimide/phthalimide: an alternative sulfenylating reagent in organic transformations

• Fatemeh Doraghi,
• Seyedeh Pegah Aledavoud,
• Mehdi Ghanbarlou,
• Bagher Larijani and
• Mohammad Mahdavi

Beilstein J. Org. Chem. 2023, 19, 1471–1502, doi:10.3762/bjoc.19.106

• functional materials and indispensable synthetic intermediates in drug discovery [31][32][33]. Because of their value, constructing C–S bonds has attracted significant attention via metal-catalyzed cross-coupling reactions and metal-free C–S bond formation [34][35][36][37]. Direct sulfenylation of the C–H

• 102 were obtained in moderate to excellent yields with good to excellent enantioselectivities (Scheme 42) [76]. It should be noted that the authors did not define the exact role of the organocatalyst in the reaction mechanism. Transition-metal-free C–H sulfenylation of electron-rich arenes 103 by N

• . developed a metal-free procedure for the synthesis of functionalized alkynyl disulfides 149 and acyl disulfides 151 under acid catalysis (Scheme 64) [94]. In this regard, they used N-alkynylthiophthalimides in the reaction with thiols to make a series of bioactive disulfides. Various simple thiols, cystines