Halogen-bonding-induced diverse aggregation of 4,5-diiodo-1,2,3-triazolium salts with different anions

• Xingyu Xu,
• Shiqing Huang,
• Zengyu Zhang,
• Lei Cao and
• Xiaoyu Yan

Beilstein J. Org. Chem. 2020, 16, 78–87, doi:10.3762/bjoc.16.10

• candidates for XB donors, which is mainly due to the ease of preparation via a copper-catalyzed click reaction between azide and alkyne [38][39]. 1,2,3-Triazoles and 1,2,3-triazolium-based XB activators have been found applications in catalytic reactions [40][41] and anion recognition [42]. Recently, we

Synthesis of C-glycosyl phosphonate derivatives of 4-amino-4-deoxy-α-ʟ-arabinose

• Lukáš Kerner and
• Paul Kosma

Beilstein J. Org. Chem. 2020, 16, 9–14, doi:10.3762/bjoc.16.2

• and azide-to-amine conversion, compound 17 was isolated as the 4-amino-4-deoxy-ʟ-ribopyranosyl derivative. The configuration was determined from the NMR data. Position H-2 at 4.02 ppm appeared as a broad doublet with small homonuclear coupling constants, as would be expected for a manno spin system

SnCl₄-catalyzed solvent-free acetolysis of 2,7-anhydrosialic acid derivatives

• Kesatebrhan Haile Asressu and
• Cheng-Chung Wang

Beilstein J. Org. Chem. 2019, 15, 2990–2999, doi:10.3762/bjoc.15.295

• characterize the formation of the 2,7-anhydro skeleton, triols 2 and 3 were treated with 2,2-dimethoxypropane in the presence of a catalytic amount of camphorsulfonic acid (CSA) in acetonitrile to afford compound 4 in 63% and azide acceptor 4a in quantitative yield (Scheme 1). The crystal structure of 4

Influence of the cis/trans configuration on the supramolecular aggregation of aryltriazoles

• Sara Tejera,
• Giada Caniglia,
• Rosa L. Dorta,
• Andrea Favero,
• Javier González-Platas and
• Jesús T. Vázquez

Beilstein J. Org. Chem. 2019, 15, 2881–2888, doi:10.3762/bjoc.15.282

• ) The triflyl azide was prepared as follows: Sodium azide (922 mg, 14.2 mmol), dissolved in pyridine (15 mL), was cooled to 0 °C under vigorous stirring. Then, triflic anhydride (1.7 mL, 10.1 mmol) was added dropwise, and the reaction mixture was left for 2 h at 0 °C under vigorous stirring. During that

• cooled in an ice bath and the above-prepared solution of triflyl azide added dropwise. The resulting green reaction mixture was allowed to warm to room temperature and left for 20 h. The reaction mixture was diluted with CH2Cl2 (100 mL) and extracted using diluted HCl until the pH value was acidic (4

Diversity-oriented synthesis of spirothiazolidinediones and their biological evaluation

• Sambasivarao Kotha,
• Gaddamedi Sreevani,
• Lilya U. Dzhemileva,
• Milyausha M. Yunusbaeva,
• Usein M. Dzhemilev and
• Vladimir A. D’yakonov

Beilstein J. Org. Chem. 2019, 15, 2774–2781, doi:10.3762/bjoc.15.269

• various diseases. Hence, we also modified the N-propargyl alcohol derivative 21 to 1,2,3-triazolo alcohol derivative 24 by click chemistry using 4-nitrophenyl azide (23) and the corresponding triazolo alcohol derivative 24 was obtained as yellow solid in 80% yield (Scheme 9) [58]. All alcohol derivatives

Fluorinated maleimide-substituted porphyrins and chlorins: synthesis and characterization

• Valentina A. Ol’shevskaya,
• Elena G. Kononova and
• Andrei V. Zaitsev

Beilstein J. Org. Chem. 2019, 15, 2704–2709, doi:10.3762/bjoc.15.263

• . Complexes 2a and 2b readily reacted with the excess of NaN3 in DMF/DMSO to afford porphyrins 3a and 3b in high yields via the selective substitution of fluorine atoms in the para-position of the pentafluorophenyl substituents with four azide functions. The subsequent reduction of para-tetraazidoporphyrinato

• 1,2,3-triazole heterocycles via the copper-catalyzed azide–alkyne cycloaddition reaction (CuAAC) between alkynes and azides, developed independently by Sharpless [41] and Meldal [42]. In addition to the applications of triazoles as pharmacophores in the potential biologically active molecules, these

• ylide, generated in situ from sarcosine and paraformaldehyde. The reaction of chlorin 9 with the excess of NaN3 in DMF/DMSO resulted in tetraazide chlorin 10 in 85% yield after the purification. The reduction of azide groups in chlorin 10 with SnCl2 in MeOH gave tetraamino-substituted chlorin 11 which

Safe and highly efficient adaptation of potentially explosive azide chemistry involved in the synthesis of Tamiflu using continuous-flow technology

• Cloudius R. Sagandira and
• Paul Watts

Beilstein J. Org. Chem. 2019, 15, 2577–2589, doi:10.3762/bjoc.15.251

• , more than 60 synthetic routes have been developed to date, however, most of the synthetic routes utilise the potentially hazardous azide chemistry making them not green, thus not amenable to easy scale up. Consequently, this study exclusively demonstrated safe and efficient handling of potentially

• explosive azide chemistry involved in a proposed Tamiflu route by taking advantage of the continuous-flow technology. The azide intermediates were safely synthesised in full conversions and >89% isolated yields. Keywords: azide chemistry; continuous flow synthesis; hazardous; safe; Tamiflu; Introduction

• have been developed towards Tamiflu to date [1][2][3]. However, most of these synthetic approaches suffer from the use of potentially hazardous azide chemistry, thus raising safety concerns [4] and eventually ruled out for large scale synthesis in batch systems [1][2]. The importance and use of azide

A new approach to silicon rhodamines by Suzuki–Miyaura coupling – scope and limitations

• Thines Kanagasundaram,
• Antje Timmermann,
• Carsten S. Kramer and
• Klaus Kopka

Beilstein J. Org. Chem. 2019, 15, 2569–2576, doi:10.3762/bjoc.15.250

• resulting rhodamine 28c could be a possible substrate for the conversion into an azide and follow-up click reactions with alkyne-substituted tumor vectors. While heating of amine 28a to the corresponding boroxine 28b lead to formation of a brown solid (presumably due to degradation), the reaction of

Combining the Ugi-azide multicomponent reaction and rhodium(III)-catalyzed annulation for the synthesis of tetrazole-isoquinolone/pyridone hybrids

• Gerardo M. Ojeda,
• Prabhat Ranjan,
• Pavel Fedoseev,
• Lisandra Amable,
• Upendra K. Sharma,
• Daniel G. Rivera and
• Erik V. Van der Eycken

Beilstein J. Org. Chem. 2019, 15, 2447–2457, doi:10.3762/bjoc.15.237

• Natural Product Research, Faculty of Chemistry, University of Havana, Zapata y G, 10400, La Habana, Cuba Peoples´ Friendship University of Russia (RUDN University) Miklukho-Maklaya Street 6, 117198 Moscow, Russia 10.3762/bjoc.15.237 Abstract An efficient sequence based on the Ugi-azide reaction and

• rhodium catalyst to promote C(sp2)–H activation in the presence of a suitable directing group. The Ugi-azide reaction provides broad molecular diversity and enables the introduction of the tetrazole moiety, which may further assist the catalytic reaction by coordinating the metal center. The scope of the

• prospect of the tetrazole hybridization strategy in drug discovery. Among the most versatile methods for obtaining tetrazoles are the Ugi-azide four-component reaction (Ugi-azide-4CR) [14][15][16] and the 1,3-dipolar cycloaddition of azides with (acyl)cyanides [17][18]. The Ugi-azide-4CR enables the

In water multicomponent synthesis of low-molecular-mass 4,7-dihydrotetrazolo[1,5-a]pyrimidines

• Irina G. Tkachenko,
• Sergey A. Komykhov,
• Vladimir I. Musatov,
• Svitlana V. Shishkina,
• Viktoriya V. Dyakonenko,
• Vladimir N. Shvets,
• Mikhail V. Diachkov,
• Valentyn A. Chebanov and
• Sergey M. Desenko

Beilstein J. Org. Chem. 2019, 15, 2390–2397, doi:10.3762/bjoc.15.231

• several times [5][6]. A third approach (Scheme 1, reaction 3) is completely different and consists of the tetrazole ring formation through cyclization of dihydropyrimidinethiones with sodium azide [14]. Generally, all three approaches allow for the preparation of a broad range of compounds 3 with a wide

Click chemistry towards thermally reversible photochromic 4,5-bisthiazolyl-1,2,3-triazoles

• Chenxia Zhang,
• Kaori Morinaka,
• Mahmut Kose,
• Takashi Ubukata and
• Yasushi Yokoyama

Beilstein J. Org. Chem. 2019, 15, 2161–2169, doi:10.3762/bjoc.15.213

• , Zonguldak Bülent Ecevit University, 67100, Zonguldak, Turkey 10.3762/bjoc.15.213 Abstract Three new diarylethenes were synthesized from 1,2-bis(5-methyl-2-(4-substituted-phenyl)thiazol-4-yl)ethyne and benzyl azide through Ru(I)-catalyzed Huisgen cyclization reactions. The 4,5-bisthiazolyl-1,2,3-triazoles

• century, Sharpless and co-workers proposed the concept of “click chemistry” [14], which stands for the secure, quick, selective, general and facile reaction between two organic functional groups. In click chemistry, the Huisgen cyclization, which occurs between an organic azide and a terminal alkyne

• the organic azide we used commercially available benzyl azide. Since 1,2-bis(5-methyl-2-phenylthiazol-4-yl)ethyne was used in our previous research [32][33][34], we employed bisthiazolylethynes as the foundation for the skeleton of the target compounds. In order to examine the substituent effects of

1,2,3-Triazolium macrocycles in supramolecular chemistry

• Mastaneh Safarnejad Shad,
• Pulikkal Veettil Santhini and
• Wim Dehaen

Beilstein J. Org. Chem. 2019, 15, 2142–2155, doi:10.3762/bjoc.15.211

• (iodine, bromine) and chalcogens (selenium and tellurium) [18]. While there are several strategies for the synthesis of triazoles, the Cu(II)-catalyzed azide–alkyne cycloaddition reaction (CuAAC click reaction) is considered as one of the most efficient, simple and mild approaches towards the preparation

• of 1,4-disubstituted 1,2,3- triazole units [19][20][21][22][23][24]. Macrocyclic ring closure can be achieved by the CuAAC of building blocks functionalized with both azide and alkyne, using [1 + 1], [2 + 2], [n + n] strategies depending on how much triazoles are needed to be included in the

Attempted synthesis of a meta-metalated calix[4]arene

• Christopher D. Jurisch and
• Gareth E. Arnott

Beilstein J. Org. Chem. 2019, 15, 1996–2002, doi:10.3762/bjoc.15.195

• yielding transformations to azide and 1,2,3-triazole derivatives which may have application in other areas of research. Keywords: calixarene; inherent chirality; mesoionic carbene; mononitration; ruthenacycle; Introduction Calix[4]arenes are a class of diverse macrocyclic compounds which have been the

• Ullmann-type coupling to give aryl azide 2, which readily reacted with phenylacetylene in a copper-catalyzed Huisgen 1,3-dipolar cycloaddition to give 1,2,3-triazole 3 (Scheme 1). The formation of the ruthenacycle was then achieved using Albrecht’s method involving regioselective methylation of triazole 3

• the solubility. An alternative route involving an azide-Sandmeyer reaction on monoaminocalix[4]arene was then envisaged, since the necessary monoaminocalix[4]arene would be accessible via a previously reported mononitration method [28][29][30][31]. However, this method for mononitration of

Archangelolide: A sesquiterpene lactone with immunobiological potential from Laserpitium archangelica

• Silvie Rimpelová,
• Michal Jurášek,
• Lucie Peterková,
• Jiří Bejček,
• Vojtěch Spiwok,
• Miloš Majdl,
• Michal Jirásko,
• Miloš Buděšínský,
• Juraj Harmatha,
• Eva Kmoníčková,
• Pavel Drašar and
• Tomáš Ruml

Beilstein J. Org. Chem. 2019, 15, 1933–1944, doi:10.3762/bjoc.15.189

• studied by us and others, there are only scarce reports on the biological activity of archangelolide. Here we present the preparation of its fluorescent derivative based on a dansyl moiety using azide–alkyne Huisgen cycloaddition having obtained the two sesquiterpene lactones from the seeds of Laserpitium

• these compounds for further work including synthetic modifications using azide–alkyne Huisgen cycloaddition. We previously showed the preparation of fluorescent trilobolide conjugates [8] that retained the activity of the parental compounds and proved to be useful for live-cell imaging. In this article

Morphology-tunable and pH-responsive supramolecular self-assemblies based on AB₂-type host–guest-conjugated amphiphilic molecules for controlled drug delivery

• Yang Bai,
• Cai-ping Liu,
• Di Chen,
• Long-hai Zhuo,
• Huai-tian Bu and
• Wei Tian

Beilstein J. Org. Chem. 2019, 15, 1925–1932, doi:10.3762/bjoc.15.188

• molecule β-CD-BM2 β-CD-N3(-OTs) was first prepared according to our previous work [45], and then a substitution reaction was performed to obtain the functionalized β-CD molecule containing two azide groups (β-CD-(N3)2). The FTIR spectrum of β-CD-(N3)2 (Figure S1A-b, Supporting Information File 1) showed

Synthesis of a [6]rotaxane with singly threaded γ-cyclodextrins as a single stereoisomer

• Jason Yin Hei Man and
• Ho Yu Au-Yeung

Beilstein J. Org. Chem. 2019, 15, 1829–1837, doi:10.3762/bjoc.15.177

• further interlocking at the γ-CD. Results and Discussion Building block design and rotaxane synthesis To encourage complex formation with γ-CD, axle 1 was designed with a biphenylene core to bind to the macrocycle through hydrophobic effect. The axle is terminated by 2-aminoethyl azide for CB[6]-mediated

• azide–alkyne cycloaddtion (CBAAC) with the anthracene-derived propagylamine stopper 2. In CBAAC, the strong ammonium–CB[6] binding places the alkyne and azide in a close proximity inside the CB[6] cavity and facilitates the cycloaddition [40][41][42]. Since CB[6] binding is required for the covalent

N-(1-Phenylethyl)aziridine-2-carboxylate esters in the synthesis of biologically relevant compounds

• Iwona E. Głowacka,
• Aleksandra Trocha,
• Andrzej E. Wróblewski and
• Dorota G. Piotrowska

Beilstein J. Org. Chem. 2019, 15, 1722–1757, doi:10.3762/bjoc.15.168

• reagent to enantiomerically pure (R)-122 (Scheme 31) useful in pseudopeptide synthesis. Derivatives of nonproteinogenic ʟ-2,3-diaminopropanoic acid, e.g., (S)-125 were synthesized from the aziridine ester (2R,1'R)-5b employing the aluminum chloride catalyzed opening of the aziridine ring with azide

• -hydroxyester 163 was produced from the epoxide 162 employing N-heterocyclic carbene catalysis. Openings of the aziridine ring in 163a with azide or in 163b with in acetic acid provided enantiomerically pure methyl (3S,4S)-4,5-di-N-Boc-amino-3-hydroxypentanoate 164 or 4-N-Boc-amino-3,5-dihydroxypentanoate 165

• -2-ones having a 2-chloromethyl substituent 173 was formed. Removal of the 1-phenylethyl moiety and a subsequent replacement of the chlorine atom by the amino group via azide gave imidazolin-2-one dipeptides 174 which were transformed into 12 derivatives 175–177 after hydrolysis of the corresponding

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• of biologically active imidazo[1,2-a] pyridine derivatives [108]. Encouraged by the direct synthetic strategies for imidazo[1,2-a]pyridines (IPs), Donthiri et al. have reported an efficient Cu-catalyzed C–H functionalization of pyridines with vinyl azide derivatives [109]. Their use of vinyl azide

• derivatives 29 for the synthesis of IPs was unprecedented. In this strategy, vinyl azide acts as a source of nitrogen with the liberation of N2 as a benign byproduct under aerobic and mild reaction conditions (Scheme 11). The protocol has surpassed the use of 2-AP as one of the mostly used reactants and

• that the presence of copper salt is mandatory for the formation of the fused heterocycle as its absence resulted in the formation of the enaminone only. The imines 118, generated in situ via the loss of nitrogen from azide derivatives, were found to be reactive towards 1,3-dipoles 117 to form diverse

Synthesis, enantioseparation and photophysical properties of planar-chiral pillar[5]arene derivatives bearing fluorophore fragments

• Guojuan Li,
• Chunying Fan,
• Guo Cheng,
• Wanhua Wu and
• Cheng Yang

Beilstein J. Org. Chem. 2019, 15, 1601–1611, doi:10.3762/bjoc.15.164

• % yield. The subsequent reaction of compound P5A with the azide-substituted DPA derivative DPA-6 was carried out in the presence of CuSO4·5H2O (2.0 equiv) and sodium ascorbate (4.0 equiv) for 24 h in DMF at 65 °C giving P5A-DPA in almost quantitative conversion (Scheme 1). The crude product was separated

Steroid diversification by multicomponent reactions

• Leslie Reguera,
• Cecilia I. Attorresi,
• Javier A. Ramírez and
• Daniel G. Rivera

Beilstein J. Org. Chem. 2019, 15, 1236–1256, doi:10.3762/bjoc.15.121

• 10 amino acid residues [64]. As shown in Scheme 18, the procedure comprised the growth of the antimicrobial peptide sequence 60 followed by the multicomponent incorporation of cholestanic steroids functionalized as isocyanide component. Two related on-resin Ugi-4CRs were employed, i.e., the Ugi-azide

Stereo- and regioselective hydroboration of 1-exo-methylene pyranoses: discovery of aryltriazolylmethyl C-galactopyranosides as selective galectin-1 inhibitors

• Alexander Dahlqvist,
• Axel Furevi,
• Niklas Warlin,
• Hakon Leffler and
• Ulf J. Nilsson

Beilstein J. Org. Chem. 2019, 15, 1046–1060, doi:10.3762/bjoc.15.102

• mesyl chloride in pyridine at 0 °C to give 2-deoxy-1-mesylgalactoheptulose 8 (91%), followed by a nucleophilic substitution reaction with sodium azide in dimethylformamide to give the azide 9 in good yield (90%) [26]. The azide 9 was reacted with a panel of substituted ethynyl arenes to give

• , 655.2342. 1-Azido-3,4,5,7-tetra-O-benzyl-1,2-dideoxy-β-D-galactoheptulose (9): Compound 8 (3.51 g, 5.55 mmol) was dissolved in dry DMF (40 mL) and sodium azide (791 mg, 12.17 mmol) was added. The reaction mixture was heated to 95 °C and left overnight. Upon completion, the reaction mixture was poured into

• oil that after about two weeks crystallized into a grey-white sticky solid. [α]D20 −5 (c 1.1, CH2Cl2); IR ν: 2101 cm−1, azide; 1H NMR (400 MHz, CDCl3) δ 7.45–7.25 (m, 20H), 5.00 (d, J = 3.3 Hz, 1H), 4.97 (d, J = 2.5 Hz, 1H), 4.80 (d, J = 11.7 Hz, 1H), 4.71 (d, J = 12.0 Hz, 1H), 4.68–4.61 (m, 2H), 4.52

Synthesis of (macro)heterocycles by consecutive/repetitive isocyanide-based multicomponent reactions

• Angélica de Fátima S. Barreto and
• Carlos Kleber Z. Andrade

Beilstein J. Org. Chem. 2019, 15, 906–930, doi:10.3762/bjoc.15.88

• of polystyrene resin 3 as the amine component. After resin removal with piperidine in DMF, a combinatorial strategy of replacing the carboxylic acid component with trimethylsilyl azide (TMSN3) (azido-Ugi reaction) or cyanic acid, followed by Fmoc removal (TFA), allowed the formation of the tetrazole

• yield amino acids 11 bearing a 1,5-disubstituted tetrazole. The practicality of the Ugi tetrazole reaction (also called Ugi-azide or azido-Ugi reaction) has been recently reviewed [20][21]. These compounds were then used in an intramolecular three-component four-center Ugi reaction using equimolar

• mixture of diastereomers). Recently, our research group [22] carried out the synthesis of bis(1,5-disubstituted tetrazoles) 14 using two consecutive Ugi reactions (Scheme 4). The synthetic strategy was based on two hydrazino-Ugi-azide reactions and a hydrazinolysis step for the synthesis of acylhydrazino

New α- and β-cyclodextrin derivatives with cinchona alkaloids used in asymmetric organocatalytic reactions

• Iveta Chena Tichá,
• Simona Hybelbauerová and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2019, 15, 830–839, doi:10.3762/bjoc.15.80

• to non-methylated CDs was developed. For our purposes of using the derivatives as catalysts for enantioselective reactions, we focused on α- and β-CD skeletons. Our successful approach consisted of attaching these molecules through copper-catalyzed alkyne–azide cycloaddition (CuAAC). First, the

Solid-phase synthesis of biaryl bicyclic peptides containing a 3-aryltyrosine or a 4-arylphenylalanine moiety

• Iteng Ng-Choi,
• Àngel Oliveras,
• Lidia Feliu and
• Marta Planas

Beilstein J. Org. Chem. 2019, 15, 761–768, doi:10.3762/bjoc.15.72

• -terminal groups of the peptide and their putative target. This method has been used for the macrocyclization of peptides through, for example, copper-catalyzed azide–alkyne cycloadditions [14], ring-closing olefin metathesis [13] or the formation of an aryl–aryl bond between the side chain of two aromatic

Synthesis of functionalized diazocines for application as building blocks in photo- and mechanoresponsive materials

• Widukind Moormann,
• Daniel Langbehn and
• Rainer Herges

Beilstein J. Org. Chem. 2019, 15, 727–732, doi:10.3762/bjoc.15.68

• Widukind Moormann Daniel Langbehn Rainer Herges Otto Diels Institute for Organic Chemistry, Christian-Albrechts-University, Otto-Hahn-Platz 4, 24118 Kiel, Germany 10.3762/bjoc.15.68 Abstract Seven symmetrically 3,3’-substituted diazocines were synthesized. Functional groups include alcohol, azide