Divergent role of PIDA and PIFA in the AlX₃ (X = Cl, Br) halogenation of 2-naphthol: a mechanistic study

• Kevin A. Juárez-Ornelas,
• Manuel Solís-Hernández,
• Pedro Navarro-Santos,
• J. Oscar C. Jiménez-Halla and
• César R. Solorio-Alvarado

Beilstein J. Org. Chem. 2024, 20, 1580–1589, doi:10.3762/bjoc.20.141

• reported by our group, was elucidated via quantum chemical calculations using density functional theory. The chlorination mechanism using PIFA and AlCl3 demonstrated a better experimental and theoretical yield compared to using PIDA. Additionally, the lowest-energy chlorinating species was characterized by

• halogenation via PhIX2. Keywords: aromatic bromination; aromatic chlorination; density functional theory (DFT); hypervalent iodine; iodine(III); Introduction Hypervalent iodine(III) reagents have gained attention as strong oxidants with a low toxicity [1][2][3][4][5][6][7][8] and due to the ability to mimic

• , and transition-state structures were optimized by density functional theory (DFT) calculations employing the software Gaussian 16 [34]. Although the B3LYP functional could be suitable for these calculations, e.g., for tracing reaction pathways, nitrations, halogenations, or FC acylations in solution

Regio- and stereochemical stability induced by anomeric and gauche effects in difluorinated pyrrolidines

• Ana Flávia Candida Silva,
• Francisco A. Martins and
• Matheus P. Freitas

Beilstein J. Org. Chem. 2024, 20, 1572–1579, doi:10.3762/bjoc.20.140

• the impact of gauche and anomeric effects on the conformer stabilities of different stereo- and regioisomers. Initially, we conducted a benchmark assessment comparing the optimal density functional theory method with coupled cluster with single and double excitations (CCSD) calculations and

• each be subjected to quantum-chemical analysis. Results and Discussion In order to achieve the most accurate conformational depiction of the difluorinated pyrrolidines through density functional theory (DFT), a benchmark study was conducted. This study compares the crystallographic geometry of a

Predicting bond dissociation energies of cyclic hypervalent halogen reagents using DFT calculations and graph attention network model

• Yingbo Shao,
• Zhiyuan Ren,
• Zhihui Han,
• Li Chen,
• Yao Li and
• Xiao-Song Xue

Beilstein J. Org. Chem. 2024, 20, 1444–1452, doi:10.3762/bjoc.20.127

• both homolytic and heterolytic bond dissociation energies (BDEs) critical for assessing the chemical stability and functional group transfer capability of cyclic hypervalent halogen compounds using density functional theory (DFT) analysis. A moderate linear correlation was observed between the

A comparison of structure, bonding and non-covalent interactions of aryl halide and diarylhalonium halogen-bond donors

• Nicole Javaly,
• Theresa M. McCormick and
• David R. Stuart

Beilstein J. Org. Chem. 2024, 20, 1428–1435, doi:10.3762/bjoc.20.125

• , monovalent, and hypervalent have been developed and studied. In this work we used density functional theory (DFT), natural bond orbital (NBO) theory, and quantum theory of atoms in molecules (QTAIM) to analyze aryl halogen-bond donors that are neutral, cationic, monovalent and hypervalent and in each series

• Cl, Br, I, and At. We have used density functional theory (DFT) to uncover periodic trends in the orbitals used by the central halogen atom in forming covalent and non-covalent interactions and how this impacts the interatomic distance and energy of halogen-bond interactions (Scheme 1c). Results and

Diameter-selective extraction of single-walled carbon nanotubes by interlocking with Cu-tethered square nanobrackets

• Guoqing Cheng and
• Naoki Komatsu

Beilstein J. Org. Chem. 2024, 20, 1298–1307, doi:10.3762/bjoc.20.113

• complexation, a significant red-shift of the dipyrrin band to 465 nm was observed due to the metal coordination with the dipyrrin moieties in 4b. To compare the structures of 1a and 1b, they are calculated through geometry optimization with the density functional theory (DFT) method. The alkyl chains at the

Synthesis of indano[60]fullerene thioketone and its application in organic solar cells

• Yong-Chang Zhai,
• Shimon Oiwa,
• Shinobu Aoyagi,
• Shohei Ohno,
• Tsubasa Mikie,
• Jun-Zhuo Wang,
• Hirofumi Amada,
• Koki Yamanaka,
• Kazuhira Miwa,
• Naoyuki Imai,
• Takeshi Igarashi,
• Itaru Osaka and
• Yutaka Matsuo

Beilstein J. Org. Chem. 2024, 20, 1270–1277, doi:10.3762/bjoc.20.109

• -withdrawing substituents. Computational studies with density functional theory revealed the unique vibrations of the thioketone group in FIDS. The molecular structure of FIDS was confirmed by single-crystal X-ray analysis. Bulk heterojunction organic solar cells using three evaporable fullerene derivatives

• differences between t-Bu-FIDO and t-Bu-FIDS, the density functional theory (DFT) method was employed using the B3LYP hybrid functional. The 6-31G* basis set was used for the geometry optimization and frequency calculation. The thiocarbonyl group in FIDS was found to have an out of plane bending vibration

Competing electrophilic substitution and oxidative polymerization of arylamines with selenium dioxide

• Vishnu Selladurai and
• Selvakumar Karuthapandi

Beilstein J. Org. Chem. 2024, 20, 1221–1235, doi:10.3762/bjoc.20.105

• electrons over the adjacent carboxylate function, which prompted the selenation pathway, leading to the formation of two of the isomeric diorganyl selenides of methyl anthranilate. The diaryl selenides were structurally characterized using single-crystal X-ray diffraction. Density functional theory

• with arylamines follows a complex reaction pathway, leading to a mixture of compounds. We established the possible reaction pathways using 77Se NMR spectroscopy and single-crystal X-ray crystallographic studies. Density functional theory (DFT) calculations were carried out to understand the relative

Stability trends in carbocation intermediates stemming from germacrene A and hedycaryol

• Naziha Tarannam,
• Prashant Kumar Gupta,
• Shani Zev and
• Dan Thomas Major

Beilstein J. Org. Chem. 2024, 20, 1189–1197, doi:10.3762/bjoc.20.101

• reaction trajectory towards this pathway and make sure that it stays along this pathway and does not rearrange to a similar, more stable carbocation. Here, using density functional theory (DFT) calculations, we provide a rationale for the relative stability of the intermediate carbocations formed from

Two-fold addition reaction of silylene to C₆₀: structural and electronic properties of a bis-adduct

• Masahiro Kako,
• Masato Kai,
• Masanori Yasui,
• Michio Yamada,
• Yutaka Maeda and
• Takeshi Akasaka

Beilstein J. Org. Chem. 2024, 20, 1179–1188, doi:10.3762/bjoc.20.100

• silirane (silacyclopropane) derivative of fullerenes. Electrochemical measurements confirmed that the redox potentials of 3 are shifted cathodically compared to those of the parent mono-adduct 2. Density functional theory (DFT) calculations provided the basis for the electronic properties of compound 3

• results. To obtain some insight into regioselectivity, we performed density functional theory (DFT) calculations using the B3LYP/6-31G(d) method [45][46][47][48]. We first compared the relative stabilities of mono-adducts (Dip2SiC60) with 6,6-silirane (2a), 6,6-sila-fulleroid (2b), 5,6-silirane (2c), and

Novel route to enhance the thermo-optical performance of bicyclic diene photoswitches for solar thermal batteries

• Akanksha Ashok Sangolkar,
• Rama Krishna Kadiyam and
• Ravinder Pawar

Beilstein J. Org. Chem. 2024, 20, 1053–1068, doi:10.3762/bjoc.20.93

• , the storage energy was also calculated using the polarizable continuum model (PCM) [43]. The storage energy calculated using both the methods are systematically compared. All the above-mentioned calculations were accomplished using the density functional theory (DFT) implemented in Gaussian 16 [44

Structure–property relationships in dicyanopyrazinoquinoxalines and their hydrogen-bonding-capable dihydropyrazinoquinoxalinedione derivatives

• Tural N. Akhmedov,
• Ajeet Kumar,
• Daken J. Starkenburg,
• Kyle J. Chesney,
• Khalil A. Abboud,
• Novruz G. Akhmedov,
• Jiangeng Xue and
• Ronald K. Castellano

Beilstein J. Org. Chem. 2024, 20, 1037–1052, doi:10.3762/bjoc.20.92

• to estimate energies of the frontier molecular orbitals (FMOs), specifically the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), for DCPQs 1a–7a as well as 1b–7b. The density functional theory (DFT) calculations were performed using the B3LYP/6-31+G

Enhanced reactivity of Li⁺@C₆₀ toward thermal [2 + 2] cycloaddition by encapsulated Li⁺ Lewis acid

• Hiroshi Ueno,
• Yu Yamazaki,
• Hiroshi Okada,
• Fuminori Misaizu,
• Ken Kokubo and
• Hidehiro Sakurai

Beilstein J. Org. Chem. 2024, 20, 653–660, doi:10.3762/bjoc.20.58

• of this straightforward and selective reaction for Li+@C60. Results and Discussion We began by performing density functional theory (DFT) calculations to screen the substrates with suitable HOMO levels for the thermal [2 + 2] cycloaddition with Li+@C60. The structures of several kinds of possible

Chemical and biosynthetic potential of Penicillium shentong XL-F41

• Ran Zou,
• Xin Li,
• Xiaochen Chen,
• Yue-Wei Guo and
• Baofu Xu

Beilstein J. Org. Chem. 2024, 20, 597–606, doi:10.3762/bjoc.20.52

• inapplicability of the NOESY experiment. To establish the absolute configuration of compound 1, electron circular dichroism (ECD) calculations were conducted using the time-dependent density functional theory (TDDFT) approach at a B3LYP/6-311G (d,p) (IEFPCM) level (Figure 4). Considering the uncertainty of the

Possible bi-stable structures of pyrenebutanoic acid-linked protein molecules adsorbed on graphene: theoretical study

• Yasuhiro Oishi,
• Motoharu Kitatani and
• Koichi Kusakabe

Beilstein J. Org. Chem. 2024, 20, 570–577, doi:10.3762/bjoc.20.49

• . A substitution effect that does not effectively change the potential energy surface is isotopic substitution. In fact, the adiabatic potential surface defined for a hypothetical motion at the absolute zero is not changed by a change in nuclear mass. Even in density functional theory calculations

• biosensing device. In oscillator-type biosensors, by arranging an appropriate surrounding environment, an improvement of the sensitivity is expected. Computational Method The density functional theory (DFT) calculation determined stable atomic configurations of conformation 1 and 2 of PASE on graphene. In

Enhanced host–guest interaction between [10]cycloparaphenylene ([10]CPP) and [5]CPP by cationic charges

• Eiichi Kayahara,
• Yoshiyuki Mizuhata and
• Shigeru Yamago

Beilstein J. Org. Chem. 2024, 20, 436–444, doi:10.3762/bjoc.20.38

• absorption bands in the visible region and characteristic broad absorption bands extending to the NIR region (≈2000 nm) (Figure 4, black line). According to time-dependent density functional theory (DFT) calculations at the ωB97-XD/6-31G* level of theory, the NIR absorption of the most thermodynamically

Unveiling the regioselectivity of rhodium(I)-catalyzed [2 + 2 + 2] cycloaddition reactions for open-cage C₇₀ production

• Cristina Castanyer,
• Anna Pla-Quintana,
• Anna Roglans,
• Albert Artigas and
• Miquel Solà

Beilstein J. Org. Chem. 2024, 20, 272–279, doi:10.3762/bjoc.20.28

• this case the ratio in favor of the α-isomer was higher (80:20, Figure S6 in Supporting Information File 1). To gain theoretical insight into the regioselectivity of the reaction, a density functional theory (DFT) investigation was carried out, as depicted in Figure 3. In the computations, the tosyl

Perspectives on push–pull chromophores derived from click-type [2 + 2] cycloaddition–retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

• Michio Yamada

Beilstein J. Org. Chem. 2024, 20, 125–154, doi:10.3762/bjoc.20.13

• . The absolute configurations of the axially chiral TCBD and DCNQ derivatives were ascertained by a comparative analysis of the experimental CD spectra against the spectra derived from time-dependent density functional theory (TD-DFT) calculations. The axial chirality was stabilized by the steric

Electron-beam-promoted fullerene dimerization in nanotubes: insights from DFT computations

• Laura Abella,
• Gerard Novell-Leruth,
• Josep M. Ricart,
• Josep M. Poblet and
• Antonio Rodríguez-Fortea

Beilstein J. Org. Chem. 2024, 20, 92–100, doi:10.3762/bjoc.20.10

• pressures and high temperatures [13][14][15]. We aim to shed light in these reaction mechanisms and energy profiles by using complementary methodologies as standard density functional theory (DFT) calculations and first-principles Car–Parrinello molecular dynamics (CPMD) simulations. Firstly, we have

• -TEM images and movies will provide us a deeper understanding of fullerene coalescence processes in peapods. Computational Methods The Amsterdam Density Functional (ADF) code [21][22] was used for the electronic structure calculations and to optimize reactants, products, intermediates and transition

• ) [27]. The PBE functional was selected as the density functional. Dispersion corrections were also considered in the calculations. We used a fictitious electron mass of 800 a.u. The simulations were carried out using periodic boundary conditions in a tetragonal cell (side length of 11 Å and height of

Controlling the reactivity of La@C₈₂ by reduction: reaction of the La@C₈₂ anion with alkyl halide with high regioselectivity

• Yutaka Maeda,
• Saeka Akita,
• Mitsuaki Suzuki,
• Michio Yamada,
• Takeshi Akasaka,
• Kaoru Kobayashi and
• Shigeru Nagase

Beilstein J. Org. Chem. 2023, 19, 1858–1866, doi:10.3762/bjoc.19.138

• ) values [26] of the carbon atoms (θσπ-90˚) of the La@C2v-C82 anion were calculated using density functional theory (DFT) [27][28][29][30][31][32][33]. As shown in Table 1 and Figure 6, the C1, C2, and C3 atoms have large negative charge densities (C1: −0.1498, C2: −0.1828, C3: −0.1126), and C1 and C2

Thienothiophene-based organic light-emitting diode: synthesis, photophysical properties and application

• Recep Isci and
• Turan Ozturk

Beilstein J. Org. Chem. 2023, 19, 1849–1857, doi:10.3762/bjoc.19.137

• absorption and emission maxima of 411 and 520 nm, respectively, with a mega Stokes shift of 109 nm and fluorescence quantum yields both in the solid state (41%) and in solution (86%). The optical properties were supported by computational chemistry using density functional theory for optimized geometry and

• . The high thermal stability is profitable for the preparation of stable and durable OLED devices. Computational chemistry Ground-state geometry optimization of DMB-TT-TPA (8) was performed using density functional theory (DFT) calculations with the Gaussian 16 software at the B3LYP/6-31G (d,p) level

Recent advancements in iodide/phosphine-mediated photoredox radical reactions

• Tinglan Liu,
• Yu Zhou,
• Junhong Tang and
• Chengming Wang

Beilstein J. Org. Chem. 2023, 19, 1785–1803, doi:10.3762/bjoc.19.131

• esters 8, 9 without the requirements of phosphine or other photocatalysts (Scheme 5). Through the use of density functional theory (DFT) calculations, they elucidated the mechanism behind this process. It was revealed that the formation of a photoactive EDA complex, which subsequently generated alkyl

Quinoxaline derivatives as attractive electron-transporting materials

• Zeeshan Abid,
• Liaqat Ali,
• Sughra Gulzar,
• Faiza Wahad,
• Raja Shahid Ashraf and
• Christian B. Nielsen

Beilstein J. Org. Chem. 2023, 19, 1694–1712, doi:10.3762/bjoc.19.124

• chemistry offers a cost-effective and time-efficient means of screening and selecting promising candidates for experimental exploration. Bhattacharya et al. employed density functional theory (DFT) approach to explore structural modulation for tuning the optoelectronic properties of Qx13. Their designed

A deep-red fluorophore based on naphthothiadiazole as emitter with hybridized local and charge transfer and ambipolar transporting properties for electroluminescent devices

• Suangsiri Arunlimsawat,
• Patteera Funchien,
• Pongsakorn Chasing,
• Atthapon Saenubol,
• Taweesak Sudyoadsuk and
• Vinich Promarak

Beilstein J. Org. Chem. 2023, 19, 1664–1676, doi:10.3762/bjoc.19.122

• MALDI-TOF-MS techniques. To examine the electronic properties of D–A TPECNz, density functional theory (DFT) calculations at the B3LYP level of theory with the 6-31G(d,p) basis set were performed. It has been previously reported that the twist angle of the D–A segment has a significant role in

• points were measured using a Krüss KSP1N melting point meter and are uncorrected. Quantum chemical calculations were executed using the Gaussian 16 package [67]. Density functional theory (DFT) calculations at the B3LYP level of theory with the 6-31G(d,p) basis set were performed to realize the ground

Unraveling the role of prenyl side-chain interactions in stabilizing the secondary carbocation in the biosynthesis of variexenol B

• Moe Nakano,
• Rintaro Gemma and
• Hajime Sato

Beilstein J. Org. Chem. 2023, 19, 1503–1510, doi:10.3762/bjoc.19.107

• Gaussian 16 package [42]. Structure optimizations were done with the M06-2X [43] density functional theory method and the 6-31+G(d,p) basis set without any symmetry restrictions. M06-2X was selected because of its accuracy in calculating terpene-forming reactions and its proven track record being used in

Organic thermally activated delayed fluorescence material with strained benzoguanidine donor

• Alexander C. Brannan,
• Elvie F. P. Beaumont,
• Nguyen Le Phuoc,
• George F. S. Whitehead,
• Mikko Linnolahti and
• Alexander S. Romanov

Beilstein J. Org. Chem. 2023, 19, 1289–1298, doi:10.3762/bjoc.19.95

• ). Computational results Computations were performed using density functional theory (DFT) for the ground state and time-dependent DFT (TD-DFT) with Tamm–Dancoff approximation [24][25] for the excited states calculations, using the global hybrid MN15 functional by Truhlar [26] in combination with the def2-TZVP