Unraveling aromaticity: the dual worlds of pyrazole, pyrazoline, and 3D carborane

• Zahra Noori,
• Miquel Solà,
• Clara Viñas,
• Francesc Teixidor and
• Jordi Poater

Beilstein J. Org. Chem. 2025, 21, 412–420, doi:10.3762/bjoc.21.29

• ], offering enhanced properties and efficacy [28][30][33][34][35]. Therefore, the advancement of simple, efficient methodologies for synthesizing o-carborane-fused heterocycles is critically needed. However, the limited number of synthetic strategies for carborane functionalization [36] continues to constrain

Identification and removal of a cryptic impurity in pomalidomide-PEG based PROTAC

• Bingnan Wang,
• Yong Lu and
• Chuo Chen

Beilstein J. Org. Chem. 2025, 21, 407–411, doi:10.3762/bjoc.21.28

• silica gel column chromatography. The LUMO and electrostatic charges of thalidomide and its derivatives by DFT calculation at the ωB97X-D/6-311+G** level. The synthetic route for iVeliparib-AP6. The conversion of byproduct 6 to 10 to facilitate its removal. Effects of the length and functionalization of

Red light excitation: illuminating photocatalysis in a new spectrum

• Lucas Fortier,
• Corentin Lefebvre and
• Norbert Hoffmann

Beilstein J. Org. Chem. 2025, 21, 296–326, doi:10.3762/bjoc.21.22

• or side reactivity in a scope of around 50 examples with yields ranging from 27 to 97 % compared to the use of blue-light (Scheme 3a) [20]. In this way, T. Rovis et al. have exploited their photocatalytic system on the functionalization of drug-like scaffolds with moderate to good yields (Scheme 3b

• such as zinc as proposed by Furuyama et al. [35]. In this way, the authors have developed a series of phthalocyanin zinc complexes with electron-rich sulfur atoms at the non-peripheral positions of the phthalocyanin ring. This functionalization allows the destabilization of the highest occupied

Synthesis and characterizations of highly luminescent 5-isopropoxybenzo[rst]pentaphene

• Islam S. Marae,
• Jingyun Tan,
• Rengo Yoshioka,
• Zakaria Ziadi,
• Eugene Khaskin,
• Serhii Vasylevskyi,
• Ryota Kabe,
• Xiushang Xu and
• Akimitsu Narita

Beilstein J. Org. Chem. 2025, 21, 270–276, doi:10.3762/bjoc.21.19

• -donating bis(methoxyphenyl)amino groups further improved the PLQY to 73%, displaying a mixed excitonic and charge-transfer character [22]. Additionally, the functionalization of BPP with two methyl benzoate groups enabled the development of hole-selective contact, which was applicable in significantly

Effect of substitution position of aryl groups on the thermal back reactivity of aza-diarylethene photoswitches and prediction by density functional theory

• Misato Suganuma,
• Daichi Kitagawa,
• Shota Hamatani and
• Seiya Kobatake

Beilstein J. Org. Chem. 2025, 21, 242–252, doi:10.3762/bjoc.21.16

• replacing the rotor pyridyl group of a hydrazone switch with a phenyl group afforded long-lived negative photochromic compounds [49]. In addition, Hecht and co-workers reported that the thermal stability of indigos can be tuned by N-functionalization [50][51]. They revealed that the introduction of electron

Visible-light-promoted radical cyclisation of unactivated alkenes in benzimidazoles: synthesis of difluoromethyl- and aryldifluoromethyl-substituted polycyclic imidazoles

• Yujun Pang,
• Jinglan Yan,
• Nawaf Al-Maharik,
• Qian Zhang,
• Zeguo Fang and
• Dong Li

Beilstein J. Org. Chem. 2025, 21, 234–241, doi:10.3762/bjoc.21.15

• substituted with halogen atoms (–F, –Cl, –Br) were also suitable for this transformation, efficiently giving the desired products in yields of 65–80% (3b, 3e–g), thus facilitating further functionalization possibilities. Notably, substrates with substituents at the sterically hindered 7-position of the

Recent advances in electrochemical copper catalysis for modern organic synthesis

• Yemin Kim and
• Won Jun Jang

Beilstein J. Org. Chem. 2025, 21, 155–178, doi:10.3762/bjoc.21.9

• catalysis to organic synthesis, focusing on recent developments in Cu-catalyzed electrochemical reaction categorized into four types: 1) C–H functionalization, 2) olefin addition, 3) decarboxylative functionalization, and 4) coupling reactions (Figure 3). This review aims to provide insight into the

• potential of copper-based electrochemical methodologies while also inspiring future research in this rapidly growing field. Review C–H Functionalization Site- and chemoselective C–H functionalization has emerged as a powerful platform for the formation of new C–C and C–heteroatom bonds, offering an

• functionalization of highly complex and diverse molecules, such as those of pharmaceuticals and natural products, has provided new retrosynthetic disconnections for complex compounds, contributing to improved resource efficiency [41][42][43][44][45][46]. Recently, the merging of C–H activation and electrochemistry

Nickel-catalyzed cross-coupling of 2-fluorobenzofurans with arylboronic acids via aromatic C–F bond activation

• Takeshi Fujita,
• Haruna Yabuki,
• Ryutaro Morioka,
• Kohei Fuchibe and
• Junji Ichikawa

Beilstein J. Org. Chem. 2025, 21, 146–154, doi:10.3762/bjoc.21.8

• organic chemistry owing to their high bond dissociation energy compared to other aromatic C–X (X = Cl, Br, I) bonds [1][2][3][4][5][6][7]. This activation is essential for the late-stage functionalization of stable C–F bonds in complex molecules with reactive functional groups, providing an orthogonal

Cu(OTf)₂-catalyzed multicomponent reactions

• Sara Colombo,
• Camilla Loro,
• Egle M. Beccalli,
• Gianluigi Broggini and
• Marta Papis

Beilstein J. Org. Chem. 2025, 21, 122–145, doi:10.3762/bjoc.21.7

• to multiple C–C bonds generates extended carbon radicals capable of giving further functionalization. Regarding the ionic mechanism, the key step generally comprises the complexation with the unsaturated substrate leading to activation of the alkenyl/alkynyl moiety towards a nucleophilic attack. In

• multicomponent synthesis of acyclic and heteropolycyclic systems under copper(II) triflate catalysis are reported. Using alkenes and alkynes as substrates, various types of reactions were considered, including hydroamination, condensation, cross-coupling, C–H functionalization, cycloaddition, aza-Diels–Alder

Recent advances in organocatalytic atroposelective reactions

• Henrich Szabados and
• Radovan Šebesta

Beilstein J. Org. Chem. 2025, 21, 55–121, doi:10.3762/bjoc.21.6

Reactivity of hypervalent iodine(III) reagents bearing a benzylamine with sulfenate salts

• Beatriz Dedeiras,
• Catarina S. Caldeira,
• José C. Cunha,
• Clara S. B. Gomes and
• M. Manuel B. Marques

Beilstein J. Org. Chem. 2024, 20, 3281–3289, doi:10.3762/bjoc.20.272

• the functionalization of BBX reagents. (Benzylamino)benziodoxolones, BBXs 2, were prepared according to our reported procedure, via reaction with previously silylated benzylamines (Scheme 2) [4]. Using this methodology, a total of four benziodoxolones (including the new p-fluorobenzylamine

Giese-type alkylation of dehydroalanine derivatives via silane-mediated alkyl bromide activation

• Perry van der Heide,
• Michele Retini,
• Fabiola Fanini,
• Giovanni Piersanti,
• Francesco Secci,
• Daniele Mazzarella,
• Timothy Noël and
• Alberto Luridiana

Beilstein J. Org. Chem. 2024, 20, 3274–3280, doi:10.3762/bjoc.20.271

• functionalization (LSF) of peptide scaffolds. α,β-Unsaturated amino acids like dehydroalanine (Dha) derivatives have emerged as particularly useful structures, as the electron-deficient olefin moiety can engage in late-stage functionalization reactions, like a Giese-type reaction. Cheap and widely available

• , forming a new C(sp3)–C(sp3) bond. The reaction can be performed in a phosphate-buffered saline (PBS) solution and shows post-functionalization prospects through pathways involving classical peptide chemistry. Keywords: dehydroalanine; Giese-type reaction; hydroalkylation; photocatalysis; water

• pathway for the functionalization of an electron-deficient olefin is the Giese reaction (Figure 1) [6][7]. This reaction involves the hydroalkylation of the olefin via radical addition (RA), followed by either hydrogen-atom transfer (HAT) or single-electron transfer (SET) and protonation. Traditionally

Controlled oligomerization of [1.1.1]propellane through radical polarity matching: selective synthesis of SF₅- and CF₃SF₄-containing [2]staffanes

• Jón Atiba Buldt,
• Wang-Yeuk Kong,
• Yannick Kraemer,
• Masiel M. Belsuzarri,
• Ansh Hiten Patel,
• James C. Fettinger,
• Dean J. Tantillo and
• Cody Ross Pitts

Beilstein J. Org. Chem. 2024, 20, 3134–3143, doi:10.3762/bjoc.20.259

• . Over the course of this study, we also found that the SF5- and CF3SF4-containing [2]staffanes reported herein are structurally interesting in their own right. Future work will examine potential applications of 2 and 3 and explore tactics for C–Cl bond functionalization. (Top) highlighting selectivity

Advances in the use of metal-free tetrapyrrolic macrocycles as catalysts

• Mandeep K. Chahal

Beilstein J. Org. Chem. 2024, 20, 3085–3112, doi:10.3762/bjoc.20.257

• , photocatalysts, and electrocatalysts are presented here. The effect of macrocyclic structural modifications such as their functionalization with different substituents, distortion from planarity, conformational flexibility and rigidity towards catalytic activity are presented, highlighting the potential of these

• [48]. Therefore, most of the work involving metal-free porphyrins is limited to investigations on N–H tautomerization and protonation–deprotonation studies [49][50][51][52]. However, there are several chemical tools to convert the planar geometry of porphyrins to nonplanar, such as functionalization

• evolution reaction (OER). There are several reviews focusing on the relationship between metallo-catalyst structures and HER, OER, and ORR performance/mechanisms, selection of the central metal ion, and peripheral functionalization of the catalysts [106][107][108][109]. This review summarizes recent

Tailored charge-neutral self-assembled L₂Zn₂ container for taming oxalate

• David Ocklenburg and
• David Van Craen

Beilstein J. Org. Chem. 2024, 20, 3007–3015, doi:10.3762/bjoc.20.250

• previously reported methods. Building block S2, based on dipropargylamine, is synthesized via a Schotten–Baumann reaction with benzoyl chloride, resulting in the flexible dialkyne backbone with a yield of 95%. The functionalization was envisioned to enhance the solubility of the ligand as we usually have

Advances in radical peroxidation with hydroperoxides

• Oleg V. Bityukov,
• Pavel Yu. Serdyuchenko,
• Andrey S. Kirillov,
• Gennady I. Nikishin,
• Vera A. Vil’ and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2024, 20, 2959–3006, doi:10.3762/bjoc.20.249

• the radical Kharasch-type functionalization of organic molecules with OOR fragment including free-component radical couplings. The discussion has been structured by the type of the substrate of radical peroxidation: C(sp3)–H substrates; aromatic systems; compounds with unsaturated C–C or C–Het bonds

• . Keywords: C–H functionalization; oxidation; peroxidation; radical reactions; TBHP; Introduction Organic peroxides are used in many different areas of human activities. The traditional and most developed field is the use of peroxides as initiators in the polymerization process for the production of a wide

• broad, the present review mainly focused on radical and metal-catalyzed functionalization of C–H bonds or unsaturated bond with hydroperoxides (Scheme 2). The aim of this review is to cover recent studies in which alkylperoxy radicals have been used for the peroxidation of C(sp3) and C(sp2) sites

Recent advances in transition-metal-free arylation reactions involving hypervalent iodine salts

• Ritu Mamgain,
• Kokila Sakthivel and
• Fateh V. Singh

Beilstein J. Org. Chem. 2024, 20, 2891–2920, doi:10.3762/bjoc.20.243

• group from position 4, and then regioselective vicinal functionalization of the generated aryne. The method's compatibility with halide-substituted aryl compounds enhances its versatility and practicality. Moreover, the completion of reaction within a mere 40 minutes at room temperature underscores its

• trifluoromethanesulfonate (TMSOTf). This synthesis was conducted in a mixture of 2,2,2-trifluoroethanol (TFE) and dichloromethane [78]. The synthesized naproxen-containing diaryliodonium salt 67 was further used to modify the aromatic ring of naproxen methyl ester 68 (Scheme 27). Various functionalization reactions which

• , transition metal-free conditions, and the presence of a C–I bond in the product, allowing for further functionalization through various coupling reactions, making the reaction method highly attractive. In 2022, Dohi and colleagues emphasized the high reactivity of TMP-iodonium acetates in the O-arylation of

C–H Trifluoromethylthiolation of aldehyde hydrazones

• Victor Levet,
• Balu Ramesh,
• Congyang Wang and
• Tatiana Besset

Beilstein J. Org. Chem. 2024, 20, 2883–2890, doi:10.3762/bjoc.20.242

• ). Mechanistic investigations revealed that AgSCF3 was the active species in the transformation. Keywords: C–H bond functionalization; C–S bond formation; hydrazones; synthetic method; trifluoromethylthiolation; Introduction Fluorinated molecules are of paramount importance [1][2][3][4][5][6][7][8][9][10][11

• various transformations [54][55][56][57][58][59][60][61][62][63][64]. In consequence, a large number of transition-metal-catalyzed or radical-mediated processes for C–H functionalization of aldehyde hydrazones has flourished over the years. An ideal scenario for a direct and sustainable synthetic route

• towards trifluoromethylthiolated hydrazones will be the direct C–H functionalization of the corresponding aldehyde hydrazone, an uncharted transformation to date. Forging a C–S bond by the direct C–H-bond functionalization of hydrazones is still underdeveloped. Except for transformations leading to the

Mechanochemical difluoromethylations of ketones

• Jinbo Ke,
• Pit van Bonn and
• Carsten Bolm

Beilstein J. Org. Chem. 2024, 20, 2799–2805, doi:10.3762/bjoc.20.235

• difluoromethyl enol ethers, which have the potential for further functionalization. Overview over difluoromethyl enol ether syntheses from acyclic and cyclic 1,3-diones (A), acyclic ketones (B), and cyclic ketones (C). Attempted difluoromethylation of 1a in solution. The reactions were performed on a 0.2 mmol

C–C Coupling in sterically demanding porphyrin environments

• Liam Cribbin,
• Brendan Twamley,
• Nicolae Buga,
• John E. O’ Brien,
• Raphael Bühler,
• Roland A. Fischer and
• Mathias O. Senge

Beilstein J. Org. Chem. 2024, 20, 2784–2798, doi:10.3762/bjoc.20.234

• acids. We report on palladium-catalyzed coupling attempts on the ortho-, meta-, and para-meso-phenyl position of sterically demanding dodecasubstituted saddle-shaped porphyrins. While para- and meta-substitutions could be achieved, ortho-functionalization in these systems remains elusive. Furthermore

• ] and almost planar [19] dodecasubstituted porphyrins have been reported. Despite the increasing interest in the chemical and physical properties of nonplanar porphyrins only limited synthetic methods are available for the functionalization of these macrocycles [6]. An attractive approach to accomplish

• . Functionalization at the meso-phenyls’ ortho- position was not manageable and more research is needed to optimize conditions. Comparing the yields in coupling of borylated porphyrins and the halogenated analogues revealed a greater yield, when the polarity of the reaction was reversed; however, due to tedious

5th International Symposium on Synthesis and Catalysis (ISySyCat2023)

• Anthony J. Burke and
• Elisabete P. Carreiro

Beilstein J. Org. Chem. 2024, 20, 2704–2707, doi:10.3762/bjoc.20.227

• organocatalyst for the gram-scale enantioselective synthesis of (S)-baclofen”, an interesting approach to recycling the very useful cinchona squaramide organocatalysts was described. This approach involved functionalization of the organocatalyst with a lipophilic linker (octadecyl side chains), resulting in a

A review of recent advances in electrochemical and photoelectrochemical late-stage functionalization classified by anodic oxidation, cathodic reduction, and paired electrolysis

• Nian Li,
• Ruzal Sitdikov,
• Ajit Prabhakar Kale,
• Joost Steverlynck,
• Bo Li and
• Magnus Rueping

Beilstein J. Org. Chem. 2024, 20, 2500–2566, doi:10.3762/bjoc.20.214

• , 52074, Aachen, Germany 10.3762/bjoc.20.214 Abstract With the resurgence of electrosynthesis in organic chemistry, there is a significant increase in the number of routes available for late-stage functionalization (LSF) of drugs. Electrosynthetic methods, which obviate the need for hazardous chemical

• representative examples to illustrate the potential of electrochemistry or photoelectrochemistry for the LSF of valuable molecular scaffolds. Keywords: electrochemistry; late-stage functionalization; paired electrolysis; pharmaceutical drugs; photoelectrochemistry; Introduction Organic electrochemistry is

• achieved compared to many classical methods. In light of the general trend towards more chemoselective protocols with broader functional group compatibility, there has been a growing interest in exploring the potential of electrosynthesis for the late-stage functionalization of complex scaffolds

Visible-light-mediated flow protocol for Achmatowicz rearrangement

• Joachyutharayalu Oja,
• Sanjeev Kumar and
• Srihari Pabbaraja

Beilstein J. Org. Chem. 2024, 20, 2493–2499, doi:10.3762/bjoc.20.213

• Achmatowicz rearrangement substrates for accessing highly decorated dihydropyranones [5]. In recent years, several groundbreaking approaches for the synthesis of dihydropyranones have been described by diverse groups of researchers [6]. These techniques do not require any pre-functionalization of non

• OH). The Achmatowicz product is formed by addition of water to oxocarbenium intermediate A followed by elimination of L. Conclusion In conclusion, an integrated continuous PFR platform for photocatalytic functionalization of furfuryl alcohols to dihydropyranones through an Achmatowicz rearrangement

Photoredox-catalyzed intramolecular nucleophilic amidation of alkenes with β-lactams

• Valentina Giraldi,
• Giandomenico Magagnano,
• Daria Giacomini,
• Pier Giorgio Cozzi and
• Andrea Gualandi

Beilstein J. Org. Chem. 2024, 20, 2461–2468, doi:10.3762/bjoc.20.210

• ; Introduction Access to nitrogen radicals for the functionalization of alkenes is a field under active investigation [1][2][3][4], as it gives the possibility to directly introduce nitrogen into an alkyl chain (alkene carboamination) to obtain valuable nitrogen-containing molecules [5][6]. Among several N

• functionalization of amides with alkenes under photoredox conditions. Another viable approach for amide functionalization through photoredox catalysis involves the nucleophilic addition, in the presence of base, of an amide to a radical cation obtained by oxidation of an unfunctionalized alkene moiety (Figure 1A

• functionalization of amides with alkenes under oxidative conditions, the oxidation potential of the alkene plays a pivotal role in the oxidation to a radical cation through photoredox catalysis [26]. Alkenes that are less functionalized possess a higher oxidation potential, necessitating the use of potent

Synthesis, electrochemical properties, and antioxidant activity of sterically hindered catechols with 1,3,4-oxadiazole, 1,2,4-triazole, thiazole or pyridine fragments

• Daria A. Burmistrova,
• Andrey Galustyan,
• Nadezhda P. Pomortseva,
• Kristina D. Pashaeva,
• Maxim V. Arsenyev,
• Oleg P. Demidov,
• Mikhail A. Kiskin,
• Andrey I. Poddel’sky,
• Nadezhda T. Berberova and
• Ivan V. Smolyaninov

Beilstein J. Org. Chem. 2024, 20, 2378–2391, doi:10.3762/bjoc.20.202

• neuroprotective, antihypoxic effects, act as antiparkinsonian agents [3][4][5], exhibit antitumor and antibacterial activity [6][7][8], possess antioxidant properties for regulating free radical processes [9][10][11]. The functionalization of polyphenolic compounds by introducing various substituents or