Synthetic applications of the Cannizzaro reaction

• Bhaskar Chatterjee,
• Dhananjoy Mondal and
• Smritilekha Bera

Beilstein J. Org. Chem. 2024, 20, 1376–1395, doi:10.3762/bjoc.20.120

• simplified form, focuses on the base-induced disproportionation of two molecules of a non-enolizable aromatic and/or aliphatic aldehyde (without an α-hydrogen atom). These aldehydes undergo in the presence of concentrated alkali or other strong bases, a simultaneous oxidation and reduction sequence of two

• a competing Cannizzaro reaction during the electrochemical oxidation of furfural [60]. On the other hand, 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) and dihydroxymethylfuran (DHMF), obtained via the Cannizzaro disproportionation of 5-(hydroxymethyl)furfural, were electrochemically oxidized to

• where other methods of oxidation or reduction might be challenging or impractical. The present discussion focuses on some recent synthetic advances and their application in biologically active compounds. Lewis acid-catalyzed intramolecular Cannizzaro reaction Wang et al. [73] depicted a highly

Generation of alkyl and acyl radicals by visible-light photoredox catalysis: direct activation of C–O bonds in organic transformations

• Mithu Roy,
• Bitan Sardar,
• Itu Mallick and
• Dipankar Srimani

Beilstein J. Org. Chem. 2024, 20, 1348–1375, doi:10.3762/bjoc.20.119

• . Appropriate selection of the phosphine reagent was the key to success in the process. Due to the lower oxidation potential, electron-rich PMe2Ph preferentially transferred a single electron to the excited state of the photocatalyst rather than the alkene, which was essential for obtaining the desired product

• catalyst is first excited and then transfers one electron to the thiocarbamate moiety to form a thiocarbamate radical anion, with change in oxidation state from III to IV. Next, the sacrificial electron donor Hünig base successfully converts [Ir(IV)] to [Ir(III)], with concurrent formation of an amine

• mechanism involves C–O bond activation of tertiary oxalates. It requires [Ir(dF(CF3)ppy)2(dtbbpy)]PF6 and NiCl2⋅DME along with dtbbpy ligand. The reaction commences with single-electron oxidation of cesium oxalate initiated by *[Ir(III)] photocatalyst. This transfer leads to the elimination of two CO2

Computation-guided scaffold exploration of 2E,6E-1,10-trans/cis-eunicellanes

• Zining Li,
• Sana Jindani,
• Volga Kojasoy,
• Teresa Ortega,
• Erin M. Marshall,
• Khalil A. Abboud,
• Sandra Loesgen,
• Dean J. Tantillo and
• Jeffrey D. Rudolf

Beilstein J. Org. Chem. 2024, 20, 1320–1326, doi:10.3762/bjoc.20.115

• when the C6–C7 alkene of 2 was oxidized by mCPBA oxidation, resulting in formation of the gersemianol derivative 8 [7]. Inspired by the reactivity of the trans-eunicellane skeleton, we conducted a series of chemical transformations to convert 2 into trans/trans-6/6/6 bicyclic skeletons with various

Oxidative hydrolysis of aliphatic bromoalkenes: scope study and reactivity insights

• Amol P. Jadhav and
• Claude Y. Legault

Beilstein J. Org. Chem. 2024, 20, 1286–1291, doi:10.3762/bjoc.20.111

• metals, inspired by Nature's metalloproteins. However, using toxic and expensive metals is not always practical, making alternative oxidative methodologies more appealing. Enter hypervalent iodine reagents – a leading metal-free choice for oxidation reactions. These robust and low-toxicity reagents have

• transformations, cementing their position as a go-to option for organic chemists. Based on our continued interest in iodine(III)-mediated chemistry, we have explored numerous strategies in oxidative transformations such as direct α-tosyloxylation of ketones [12][13][14], and the oxidation of enol esters [15][16

Domino reactions of chromones with activated carbonyl compounds

• Peter Langer

Beilstein J. Org. Chem. 2024, 20, 1256–1269, doi:10.3762/bjoc.20.108

• alcohol and oxidation of the latter resulted in formation of the final product. The reason for the change of the regioselectivity of cyclization, as compared to the formation of products 36, remains unclear at present. The reaction of 3-halochromones with 3H-indole-2-thiones (thiooxindoles) 38a–c afforded

Synthesis and optical properties of bis- and tris-alkynyl-2-trifluoromethylquinolines

• Stefan Jopp,
• Franziska Spruner von Mertz,
• Peter Ehlers,
• Alexander Villinger and
• Peter Langer

Beilstein J. Org. Chem. 2024, 20, 1246–1255, doi:10.3762/bjoc.20.107

• methyl groups and are known to protect from metabolic oxidation [16]. Fluorine-containing arenes are metabolically more stable as compared to non-fluorinated arenes and they show a higher lipophilicity. Known synthetic approaches towards 2-trifluoromethylquinolines include the cyclisation of anilines

Competing electrophilic substitution and oxidative polymerization of arylamines with selenium dioxide

• Vishnu Selladurai and
• Selvakumar Karuthapandi

Beilstein J. Org. Chem. 2024, 20, 1221–1235, doi:10.3762/bjoc.20.105

• polymerization, and solvent oxidation. For aniline and o-anisidine, predominant oxidative polymerization occurred, leading to the formation of the respective polyaniline polymers as major products. For methyl anthranilate, the oxidative polymerization was suppressed due to the delocalization of amine lone pair

• calculations suggest that the highest occupied molecular orbital of methyl anthranilate was deeply buried, which suppressed the oxidative polymerization pathway. Due to solvent oxidation, oxamide formation was also noticed to a considerable extent. This study provides that utmost care must be exercised while

• arylselenium compounds [26][27][28]. Noteworthy examples are the use of SeO2 as selenium source in aromatic electrophilic substitution reactions [27][28][29]. Selenium dioxide is a well-known oxidizing agent for the allylic oxidation and oxidation of α-CH bonds located adjacent to electron-withdrawing groups

Cofactor-independent C–C bond cleavage reactions catalyzed by the AlpJ family of oxygenases in atypical angucycline biosynthesis

• Jinmin Gao,
• Liyuan Li,
• Shijie Shen,
• Guomin Ai,
• Bin Wang,
• Fang Guo,
• Tongjian Yang,
• Hui Han,
• Zhengren Xu,
• Guohui Pan and
• Keqiang Fan

Beilstein J. Org. Chem. 2024, 20, 1198–1206, doi:10.3762/bjoc.20.102

• scaffolds (Scheme 1) [1][2][8][9][10][11][12][13][14]. Noteworthy is the prerequisite for FADH2/FMNH2, provided by E. coli Fre or flavin reductases in corresponding biosynthetic pathways, to facilitate these oxidation reactions. Experimental data support that 1 was firstly oxidized to a lactone intermediate

• 2 via Baeyer–Villiger oxidation, followed by hydrolysis to yield another crucial aldehyde/acid intermediate 3 [11][15]. Commencing from 3, diverse ring rearrangement reactions can occur, leading to the formation of distinct products. In the AlpJ-catalyzed reaction, compound 3 undergoes ring

• resemblance of AlpJ-family oxygenases to cofactor-independent anthrone oxygenases rather than to the conventional FADH2-dependent counterparts, we aimed to investigate the potential for catalyzing oxidation reactions in a cofactor-independent manner. For cofactor-independent oxygenases such as TcmH and ActVA

Two-fold addition reaction of silylene to C₆₀: structural and electronic properties of a bis-adduct

• Masahiro Kako,
• Masato Kai,
• Masanori Yasui,
• Michio Yamada,
• Yutaka Maeda and
• Takeshi Akasaka

Beilstein J. Org. Chem. 2024, 20, 1179–1188, doi:10.3762/bjoc.20.100

• of 1 with the HOMO of 2a should be considered. Electrochemical measurements of 3 Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements were conducted to evaluate the electronic effects of the silylene addends in 3 (Figure 9). The oxidation processes of 3 were shown to be

• irreversible, probably because of the removal of silylene addends, whereas the electrochemically reversible behavior was observed for the reduction waves. Table 2 presents the redox potentials of 3 obtained by DPV with those of C60 and 2, as reference compounds. Both the reduction (Ered) and the oxidation (Eox

Bismuth(III) triflate: an economical and environmentally friendly catalyst for the Nazarov reaction

• Manoel T. Rodrigues Jr.,
• Aline S. B. de Oliveira,
• Ralph C. Gomes,
• Amanda Soares Hirata,
• Lucas A. Zeoly,
• Hugo Santos,
• João Arantes,
• Catarina Sofia Mateus Reis-Silva,
• João Agostinho Machado-Neto,
• Leticia Veras Costa-Lotufo and
• Fernando Coelho

Beilstein J. Org. Chem. 2024, 20, 1167–1178, doi:10.3762/bjoc.20.99

• synthesis has been reported for several transformations, such as epoxide opening [56], ketal formation and deprotection [57][58], Mannich reaction [59], intramolecular Sakurai cyclization [60], alcohol oxidation [61], aromatic hydrocarbon nitration [62], imine allylation [63], Knoevenagel condensation [64

• according to well-established protocols [71][72][73][74]. The β-ketoesters were obtained employing a sequence of two reactions, the formation of the benzylic alcohol derivative, through a Reformatsky reaction using In(0), followed by a pyridinium chlorochromate (PCC) oxidation, giving the β-ketoesters 7a–g

Light on the sustainable preparation of aryl-cored dibromides

• Fabrizio Roncaglia,
• Alberto Ughetti,
• Nicola Porcelli,
• Biagio Anderlini,
• Andrea Severini and
• Luca Rigamonti

Beilstein J. Org. Chem. 2024, 20, 1076–1087, doi:10.3762/bjoc.20.95

• -cored halides can be broadened by converting C–Hal functions into different functional groups. For example, aldehyde and amine functionalities can be readily derived from C(sp3)–Hal functions through hydrolysis–oxidation [13] or substitution [14], respectively. This is of significant interest in the

• ) greater electrophilicity of the halo compound due to better leaving group ability of the halide ion, (iii) reduced toxicity, presumably due to faster hydrolysis [18], and (iv) easier oxidation of the halide to molecular halogen (E0 = 1.087 V (SHE) for Br2/Br−; E0 = 1.358 V (SHE) for Cl2/Cl−) [19

Structure–property relationships in dicyanopyrazinoquinoxalines and their hydrogen-bonding-capable dihydropyrazinoquinoxalinedione derivatives

• Tural N. Akhmedov,
• Ajeet Kumar,
• Daken J. Starkenburg,
• Kyle J. Chesney,
• Khalil A. Abboud,
• Novruz G. Akhmedov,
• Jiangeng Xue and
• Ronald K. Castellano

Beilstein J. Org. Chem. 2024, 20, 1037–1052, doi:10.3762/bjoc.20.92

• slight excess of diamines to sequester released HCl proved to be pivotal in achieving better yields. Oxidation with two equivalents of DDQ provided the comparator DCPQs 1a and 2a in 89% and 87% yield, respectively. The synthesis of DCPQ 3a was attempted rigorously under different conditions using

• to access 7a as depicted in Scheme 3. The synthetic strategy first involved the access of dihydropyrazine precursor 10 which then underwent oxidation in the final step. Next, 7e was easily converted to (Z,E)-bis-oxime derivative 7d in satisfactory yield. The oxime stereochemistry shown is presumably

• (7c) in moderate yield. The condensation of 7c with 13 in the presence of 1,4-dioxane yielded poorly soluble 10. Unfortunately, several oxidation attempts to access target 7a failed presumably due to the insolubility of 10 even in high polarity solvents, listed in Table S3 (Supporting Information File

Auxiliary strategy for the general and practical synthesis of diaryliodonium(III) salts with diverse organocarboxylate counterions

• Naoki Miyamoto,
• Daichi Koseki,
• Kohei Sumida,
• Elghareeb E. Elboray,
• Naoko Takenaga,
• Ravi Kumar and
• Toshifumi Dohi

Beilstein J. Org. Chem. 2024, 20, 1020–1028, doi:10.3762/bjoc.20.90

• reported [18][19] (Scheme 1). The importance of the trimethoxyphenyl (TMP) group as an auxiliary (dummy) ligand on the iodonium salt has prompted researchers to synthesize aryl(TMP)iodonium(III) trifluoroacetates via oxidation of iodoarene with m-chloroperbenzoic acid (mCPBA) in the presence of

• prepared through the oxidation of iodoarenes with NaBO3·4H2O [34], AcOOH [35], mCPBA [36], and NaClO·5H2O [37] in the presence of acetic acid. The reaction of (diacetoxyiodo)arenes bearing electron-donating (methyl (1b), methoxy (1c), and phenyl (1d)) and electron-withdrawing (methyl ester (1e), nitro (1f

• ) carboxylate 7aj carrying a fluorescent-labeling group in 93% yield. Iodosoarenes 5b–f can be easily obtained by treating (dichloroiodo)arenes [41] or (diacetoxyiodo)arenes [42] with sodium hydroxide, by oxidation of iodoarenes with NaClO·5H2O [43], or by electrolysis [44]. The reaction scope of iodosoarenes

Carbonylative synthesis and functionalization of indoles

• Alex De Salvo,
• Raffaella Mancuso and
• Xiao-Feng Wu

Beilstein J. Org. Chem. 2024, 20, 973–1000, doi:10.3762/bjoc.20.87

• by the oxidation of the catalyst. The reaction proceeded with dppp and 1,10-phenantroline (12 mol % each) under 6 bar of CO at 80 °C in DMF for 22–96 hours depending on the substrate. After the required reaction time, seven carbazolones were isolated with good yields of up to 89% (Scheme 12). In 2005

• reactions were catalyzed through Pd(dba)2, dppp, 1,10-phenantroline under 6 bar of CO at 120 °C in DMF and the products were obtained within 48–96 hours. All products were isolated with good yields except the pyranindole because it decomposed; it could only be isolated after complete oxidation in air. The

Enhancing structural diversity of terpenoids by multisubstrate terpene synthases

• Min Li and
• Hui Tao

Beilstein J. Org. Chem. 2024, 20, 959–972, doi:10.3762/bjoc.20.86

• at low titers [61]. To increase C16 terpene titers, a later study redirected the 3-ketovaleryl-CoA formation step from the previous thiolase-dependent LMVA pathway to a β-oxidation LMVA pathway, and combined it with a promiscuous phosphatase, NudB, to produce C6- and C7-isoprenol. Notably, the final

Innovative synthesis of drug-like molecules using tetrazole as core building blocks

• Jingyao Li,
• Ajay L. Chandgude,
• Qiang Zheng and
• Alexander Dömling

Beilstein J. Org. Chem. 2024, 20, 950–958, doi:10.3762/bjoc.20.85

• of tetrazole building blocks which provides the handle of alcohol functionality and further oxidation serves as an oxo component in subsequent MCRs (Figure 1d). The synthesis of oxo-tetrazoles was targeted because of the prevalence of the aldehyde substrate in MCRs and their use in medicinal

• chemistry literature. Results and Discussion First, we planned to provide a number of orthogonally protected tetrazole carbaldehyde building blocks. This should be accomplished by synthesizing the hydroxymethyl precursors by a Passerini-tetrazole synthesis, followed by oxidation to the aldehyde (Figure 1d

• Passerini-tetrazole product. Then, the Swern oxidation [22][23][24], which is widely exploited and has a wide tolerance of functional groups, was used to convert the tetrazole containing alcohols to aldehydes, in particular for derivatives bearing convertible isocyanides. Most building blocks were well

Enantioselective synthesis of β-aryl-γ-lactam derivatives via Heck–Matsuda desymmetrization of N-protected 2,5-dihydro-1H-pyrroles

• Arnaldo G. de Oliveira Jr.,
• Martí F. Wang,
• Rafaela C. Carmona,
• Danilo M. Lustosa,
• Sergei A. Gorbatov and
• Carlos R. D. Correia

Beilstein J. Org. Chem. 2024, 20, 940–949, doi:10.3762/bjoc.20.84

• followed by a sequential Jones oxidation. The overall method displays a broad scope and good enantioselectivity, favoring the (R) enantiomer. The applicability of the protocol is highlighted by the efficient enantioselective syntheses of the selective phosphodiesterase-4-inhibitor rolipram and the

• Heck adducts (methyl N,O-acetals) were efficiently converted into several arylated γ-lactams by a simple oxidation procedure (Jones oxidation). To demonstrate the applicability of the strategy, two of the chiral aryl-lactams were further derivatized to provide the selective phosphodiesterase-4

• presence of a methoxy group after the Heck–Matsuda reaction indicates methanolysis after arylation. Given the importance of the lactam rings, we envisioned a sequential Jones oxidation protocol without isolation of the methyl N,O-acetal products to obtain the corresponding lactams 4. As observed in

(Bio)isosteres of ortho- and meta-substituted benzenes

• H. Erik Diepers and
• Johannes C. L. Walker

Beilstein J. Org. Chem. 2024, 20, 859–890, doi:10.3762/bjoc.20.78

• , deiodination at the bridgehead position, and nucleophilic substitution at the alkyl chloride. From 1,2-BCP (±)-4, a variety of 1,2-BCPs were prepared through basic chemical transformations (Scheme 1B) [26]. Selective deprotection gave access to free alcohol-containing 1,2-BCPs (±)-5 and (±)-8. Oxidation and

• esterification of alcohol (±)-5 gave redox active ester (±)-6, which was itself shown to be a suitable substrate for nickel-catalysed decarboxylative cross coupling reactions to aryl-substituted BCPs (±)-7. Oxidation of alcohol (±)-8 gave acid (±)-9 which yielded amine (±)-10 after a Curtius rearrangement

• -workers also reported the modification of these 1,2-BCHs to increase the number of derivatives accessible using this approach (Scheme 3B) [38]. Transformation of the naphthyl ketone moiety of BCH (±)-25d by Baeyer–Villiger oxidation followed by hydrolysis gave carboxylic acid (±)-26. Through Curtius

Confirmation of the stereochemistry of spiroviolene

• Yao Kong,
• Yuanning Liu,
• Kaibiao Wang,
• Tao Wang,
• Chen Wang,
• Ben Ai,
• Hongli Jia,
• Guohui Pan,
• Min Yin and
• Zhengren Xu

Beilstein J. Org. Chem. 2024, 20, 852–858, doi:10.3762/bjoc.20.77

• Abstract We confirm the previously revised stereochemistry of spiroviolene by X-ray crystallographically characterizing a hydrazone derivative of 9-oxospiroviolane, which is synthesized by hydroboration/oxidation of spiroviolene followed by oxidation of the resultant hydroxy group. An unexpected thermal

• boron migration occurred during the hydroboration process of spiroviolene that resulted in the production of a mixture of 1α-hydroxyspiroviolane, 9α- and 9β-hydroxyspiroviolane after oxidation. The assertion of the cis-orientation of the 19- and 20-methyl groups provided further support for the revised

• hydroxy group, or a keto group) for further derivatization. Spiroviolene was not transformed when subjected to conditions for allylic oxidation (SeO2) even at elevated temperature [27], and the starting material was fully recovered. We have also tried hydroboration/oxidation conditions for transforming

Skeletal rearrangement of 6,8-dioxabicyclo[3.2.1]octan-4-ols promoted by thionyl chloride or Appel conditions

• Martyn Jevric,
• Julian Klepp,
• Johannes Puschnig,
• Oscar Lamb,
• Christopher J. Sumby and
• Ben W. Greatrex

Beilstein J. Org. Chem. 2024, 20, 823–829, doi:10.3762/bjoc.20.74

• small amounts of the C2 epimers. Oxidation of the hemiacetal 12a gave a moderate and unoptimised yield of 40% for lactone 24. The probable mechanism for the transformation with SOCl2 and under Appel conditions is shown in Figure 2. The reaction of alcohol 10 with the electrophiles gives the

Discovery and biosynthesis of bacterial drimane-type sesquiterpenoids from Streptomyces clavuligerus

• Dongxu Zhang,
• Wenyu Du,
• Xingming Pan,
• Xiaoxu Lin,
• Fang-Ru Li,
• Qingling Wang,
• Qian Yang,
• Hui-Min Xu and
• Liao-Bin Dong

Beilstein J. Org. Chem. 2024, 20, 815–822, doi:10.3762/bjoc.20.73

• a precursor for derivatives 2–4. The biosynthetic pathway is likely to involve enzymatic modifications at the C-2 and C-3 positions, leading to the formation of diols 2 and 3, with additional oxidation steps producing ketone 4 (Figure 3b). This supports the presence of three P450s in the cav cluster

Advancements in hydrochlorination of alkenes

• Daniel S. Müller

Beilstein J. Org. Chem. 2024, 20, 787–814, doi:10.3762/bjoc.20.72

• oxidation, whereas in Nicewicz's report, the alkene is oxidized. This modification allows for a significantly larger reaction scope (Scheme 29). Terminal alkenes and several functional groups such as ethers (163), esters (165), ketones (166), nitriles (167), and enones (170) are tolerated. The

• following mechanism (Scheme 30B): Initially, the terminal palladium species H, formed through the hydropalladation of terminal or internal alkenes (upon chain walking), coordinates to NCS via hydrogen bonding (I). Subsequent oxidation takes place to yield a Pd(IV) species (J), which then undergoes reductive

Research progress on the pharmacological activity, biosynthetic pathways, and biosynthesis of crocins

• Zhongwei Hua,
• Nan Liu and
• Xiaohui Yan

Beilstein J. Org. Chem. 2024, 20, 741–752, doi:10.3762/bjoc.20.68

• ), or zeaxanthin (7) by a carotenoid cleavage dioxygenase (CCD) to form crocetin aldehyde (8) and, after oxidation, 1, and 3) glycosylation of 1 to generate crocins (Figure 3). Since the biosynthetic pathways of 5 in plants and microorganisms have been elucidated and reviewed, we will only elaborate the

• duplication events during genome evolution [96]. When expressed in the callus of Nicotiana tabacum, GjCCD4a exhibited a higher efficiency in carotenoid cleavage than CsCCD4a [85]. ALDHs: ALDH utilizes NAD+ or NADP+ as cofactor to catalyze the oxidation of acetaldehyde into carboxylic acids. In 2018, Demurtas

Chemoenzymatic synthesis of macrocyclic peptides and polyketides via thioesterase-catalyzed macrocyclization

• Senze Qiao,
• Zhongyu Cheng and
• Fuzhuo Li

Beilstein J. Org. Chem. 2024, 20, 721–733, doi:10.3762/bjoc.20.66

• overall yield. According to the biosynthetic approach, these macrolides are produced by the type I PKS system, including thioesterase (TE)-catalyzed cyclization of the linear hexa- and heptaketide intermediates, post-PKS oxidation, and glycosylation [67]. Cane and co-workers reported that Pik TE, the TE

• then transformed into aldehyde 31 through several protecting group adjustments and the corresponding alcohol and Ley oxidation. After the preparation of 33 using Evans syn-aldol condensation as a critical step, 34 was produced by thioester formation, desilylation, and allylic oxidation. Incubating 34

• macrolactones. Using engineered variants of S. venezuelae ATCC 15439 designated strains DHS200141 [71] and YJ11242 [72], 24 and 25 were transformed to the corresponding macrolides through whole cell biotransformation to append ᴅ-desosamine and perform C–H oxidation(s) by the PikC monooxygenase (Scheme 6b). In

SOMOphilic alkyne vs radical-polar crossover approaches: The full story of the azido-alkynylation of alkenes

• Julien Borrel and
• Jerome Waser

Beilstein J. Org. Chem. 2024, 20, 701–713, doi:10.3762/bjoc.20.64

• , further oxidation would generate the corresponding carbocation, which upon reaction with a nucleophilic alkyne would form the product (Scheme 1B, reaction 3). Based on precedence in the literature, this method should allow to transfer efficiently both aryl- and alkyl-substituted alkynes [41][42][43][44

• ]. On the other hand, the nature of the alkene might be limited as it would strongly influence the oxidation potential of the carbon radical and the stability of the resulting carbocation. Recently, we reported the first successful application of an RPC strategy for the azido-alkynylation of styrenes

• since it is known to be reduced by photocatalysts such as Cu(dap)2Cl [17]. This perfectly fits a catalytic cycle involving the reduction of Ts-ABZ (3) followed by oxidation of the carbon radical to form a carbocation and regenerate the ground state catalyst. Styrene (1a) was used as model substrate