Supramolecular assembly of hypervalent iodine macrocycles and alkali metals

• Krishna Pandey,
• Lucas X. Orton,
• Grayson Venus,
• Waseem A. Hussain,
• Toby Woods,
• Lichang Wang and
• Kyle N. Plunkett

Beilstein J. Org. Chem. 2025, 21, 1095–1103, doi:10.3762/bjoc.21.87

• hypothesis diverged and considered alternative binding sights including the exterior of the HIMs. Recently, Huber and co-workers [21] showed hypervalent iodine(III) compounds were not impacted by non-coordinating BArF cations. Upon this inspiration, we employed LiBArF20 and NaBArF24 as salt sources to

Recent advances in synthetic approaches for bioactive cinnamic acid derivatives

• Betty A. Kustiana,
• Galuh Widiyarti and
• Teni Ernawati

Beilstein J. Org. Chem. 2025, 21, 1031–1086, doi:10.3762/bjoc.21.85

• active acid fluorides 48 by utilizing hypervalent iodine(III) of PhI(OPiv)2 and py·HF as the fluoride source to afford the corresponding amides 49 and 50 in excellent yields (Scheme 16) [48]. Herein, the hypervalent iodine(III) reagent reacted with the phenol group to give intermediates 51 and 52

Recent advances in organocatalytic atroposelective reactions

• Henrich Szabados and
• Radovan Šebesta

Beilstein J. Org. Chem. 2025, 21, 55–121, doi:10.3762/bjoc.21.6

Reactivity of hypervalent iodine(III) reagents bearing a benzylamine with sulfenate salts

• Beatriz Dedeiras,
• Catarina S. Caldeira,
• José C. Cunha,
• Clara S. B. Gomes and
• M. Manuel B. Marques

Beilstein J. Org. Chem. 2024, 20, 3281–3289, doi:10.3762/bjoc.20.272

• transformations. The umpolung reactivity provided by these iodine reagents enables chemical transformations that would typically demand less environmentally friendly conditions. The investigations conducted in this work confirmed the ability of the novel hypervalent iodine(III) reagents 2 to transfer their amine

Structure and thermal stability of phosphorus-iodonium ylids

• Andrew Greener,
• Stephen P. Argent,
• Coby J. Clarke and
• Miriam L. O’Duill

Beilstein J. Org. Chem. 2024, 20, 2931–2939, doi:10.3762/bjoc.20.245

• Andrew Greener Stephen P. Argent Coby J. Clarke Miriam L. O'Duill School of Chemistry, University of Nottingham, University Park, Nottingham NG7 2RD, UK 10.3762/bjoc.20.245 Abstract Hypervalent iodine(III) reagents have become indispensable tools in organic synthesis, but gaps remain in the

• and potential decomposition pathways will enable the future design and development of new reagents. Keywords: hypervalent iodine; reagent development; structural analysis; thermal stability; thermogravimetric analysis; Introduction Hypervalent iodine(III) reagents have experienced a renaissance in

• the rational design and synthesis of novel, unstabilised hypervalent iodine(III) compounds and expand the application of these powerful reagents in organic synthesis. Results and Discussion Structural data Twelve phosphorus-iodonium ylids were synthesised (Figure 2). X-ray diffraction data (XRD) of

Solvent-dependent chemoselective synthesis of different isoquinolinones mediated by the hypervalent iodine(III) reagent PISA

• Ze-Nan Hu,
• Yan-Hui Wang,
• Jia-Bing Wu,
• Ze Chen,
• Dou Hong and
• Chi Zhang

Beilstein J. Org. Chem. 2024, 20, 1914–1921, doi:10.3762/bjoc.20.167

• hexafluoro-2-propanol led to 3-substituted isoquinolinones. The solvent-dependent chemoselective synthesis of isoquinolinone derivatives is interesting and unprecedented. Further research on synthetic utility of PISA, a unique zwitterionic hypervalent iodine(III) reagent, is underway in our laboratory

Oxidative fluorination with Selectfluor: A convenient procedure for preparing hypervalent iodine(V) fluorides

• Samuel M. G. Dearman,
• Xiang Li,
• Yang Li,
• Kuldip Singh and
• Alison M. Stuart

Beilstein J. Org. Chem. 2024, 20, 1785–1793, doi:10.3762/bjoc.20.157

• -molecule drugs contain at least one fluorine atom [2]. Hypervalent iodine(III) fluorides, such as difluoroiodotoluene 1 and fluoroiodane 2, have been key to the development of numerous, new synthetic procedures for C–F bond formation over the last decade. Since difluoroiodotoluene 1 has low chemical

• as Selectfluor (Scheme 1B) [12][13][14][15][16][17][18][19][20]. In contrast to the chemistry of hypervalent iodine(III) reagents, very little is known about hypervalent iodine(V) fluorides. One problem that has blocked research into these compounds has been the lack of synthetic procedures to access

• be the best reagent for preparing bicyclic iodine(V) difluoride 6, this route was first investigated for the oxidative fluorinations of hypervalent iodine(III) amides 11a and 11b (Scheme 3). Unfortunately, these reactions did not work and difluoro(aryl)-λ5-iodanes 7a and 7b were not produced. Togni’s

Divergent role of PIDA and PIFA in the AlX₃ (X = Cl, Br) halogenation of 2-naphthol: a mechanistic study

• Kevin A. Juárez-Ornelas,
• Manuel Solís-Hernández,
• Pedro Navarro-Santos,
• J. Oscar C. Jiménez-Halla and
• César R. Solorio-Alvarado

Beilstein J. Org. Chem. 2024, 20, 1580–1589, doi:10.3762/bjoc.20.141

• halogenation via PhIX2. Keywords: aromatic bromination; aromatic chlorination; density functional theory (DFT); hypervalent iodine; iodine(III); Introduction Hypervalent iodine(III) reagents have gained attention as strong oxidants with a low toxicity [1][2][3][4][5][6][7][8] and due to the ability to mimic

• 0 kcal/mol for more clarity. Herein, one chlorine atom is transferred from aluminum to the hypervalent iodine(III) center through six-membered-ring transition state TS1–Cl (ΔG‡ = 9.7 kcal/mol, selected bond lengths 2.76, 1.22, 1.27, 1.78, 2.60, and 2.86 Å for I–O, O–C, C–O, O–Al, Al–Cl, and Cl–I

• electrophilic iodine(III) center through TS1–Br, which has a feasible energy barrier of 8.3 kcal/mol. The I–Br and Br–Al bond lengths are 3.15 and 2.78 Å, respectively, and the I–Br–Al angle is 93.1o, which is close to the common T-shape of such hypervalent iodine(III) species. This step releases the

Predicting bond dissociation energies of cyclic hypervalent halogen reagents using DFT calculations and graph attention network model

• Yingbo Shao,
• Zhiyuan Ren,
• Zhihui Han,
• Li Chen,
• Yao Li and
• Xiao-Song Xue

Beilstein J. Org. Chem. 2024, 20, 1444–1452, doi:10.3762/bjoc.20.127

• , University of Chinese Academy of Sciences, Shanghai 200032, P. R. China, School of Chemistry and Material Sciences, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, P. R. China 10.3762/bjoc.20.127 Abstract Although hypervalent iodine(III) reagents have

• hypervalent iodine(III) reagents has been developed [12][13][14][15][16][17] (Figure 1), including the well-known Zhdankin reagents [13] and Togni reagents [14]. These reagents are popularly used as electrophilic group transfer reagents [18][19] in a variety of reactions, such as C–H functionalization [20][21

• ][22], unsaturated alkane addition [23][24], and cyclization [25][26]. Despite the rapid development of hypervalent iodine(III) reagents, the exploration of isoelectronic hypervalent bromine(III) and chlorine(III) reagents has been comparatively limited despite their demonstrated potential for unique

Hypervalent iodine-catalyzed amide and alkene coupling enabled by lithium salt activation

• Akanksha Chhikara,
• Fan Wu,
• Navdeep Kaur,
• Prabagar Baskaran,
• Alex M. Nguyen,
• Zhichang Yin,
• Anthony H. Pham and
• Wei Li

Beilstein J. Org. Chem. 2024, 20, 1405–1411, doi:10.3762/bjoc.20.122

• ; lithium salt activation; olefin oxyamination; oxazoline; Introduction Hypervalent iodine(III) reagents, also known as λ3–iodanes, have been well established and used in organic synthesis for the past decades [1][2][3][4][5]. The pioneering works of Fuchigami and Fugita, Ochiai, Kita, and later the

Auxiliary strategy for the general and practical synthesis of diaryliodonium(III) salts with diverse organocarboxylate counterions

• Naoki Miyamoto,
• Daichi Koseki,
• Kohei Sumida,
• Elghareeb E. Elboray,
• Naoko Takenaga,
• Ravi Kumar and
• Toshifumi Dohi

Beilstein J. Org. Chem. 2024, 20, 1020–1028, doi:10.3762/bjoc.20.90

• (TFE, Scheme 2B) [21]. Our group previously reported the synthesis of diaryliodonium(III) salts by combining hypervalent iodine(III) reagents with electron-rich arenes in fluoroalcohol solvents, such as TFE or 1,1,1,3,3,3-hexafluoro-2-propanol [21][22]. These solvents stabilize the cationic

Combining the best of both worlds: radical-based divergent total synthesis

• Kyriaki Gennaiou,
• Antonios Kelesidis,
• Maria Kourgiantaki and
• Alexandros L. Zografos

Beilstein J. Org. Chem. 2023, 19, 1–26, doi:10.3762/bjoc.19.1

• reported the flow-controlled divergent synthesis of aporphine and morphinandienone alkaloids based on biomimetic common scaffolds (e.g., 180) using hypervalent iodine(III) reagents. Capitalizing on previously reported mechanistic investigations, they assumed that 180 can rearrange to glaucine (183) through

Redox-active molecules as organocatalysts for selective oxidative transformations – an unperceived organocatalysis field

• Elena R. Lopat’eva,
• Igor B. Krylov,
• Dmitry A. Lapshin and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2022, 18, 1672–1695, doi:10.3762/bjoc.18.179

• the key factor for the high chemoselectivity. Hypervalent iodine catalysis Effective hypervalent iodine(III)-catalyzed processes (for example, oxidative double C=C bond functionalization, oxidative cyclizations, CH-functionalization of carbonyl compounds, etc.) employing mainly peroxoacids or electric

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• published an alternative and sustainable methodology, using phenyliodine(III) bis(trifluoroacetate) (PIFA) as an oxidizing agent of the demethylation reaction [86]. The hypervalent iodine(III) proved to be a good oxidizing agent in the formation of 10 (92% yield) (Table 3, entry 2). According to the authors

An improved, scalable synthesis of Notum inhibitor LP-922056 using 1-chloro-1,2-benziodoxol-3-one as a superior electrophilic chlorinating agent

• Nicky J. Willis,
• Elliott D. Bayle,
• George Papageorgiou,
• David Steadman,
• Benjamin N. Atkinson,
• William Mahy and
• Paul V. Fish

Beilstein J. Org. Chem. 2019, 15, 2790–2797, doi:10.3762/bjoc.15.271

• et al. described the electrophilic chlorination of arenes and heterocycles by 1-chloro-1,2-benziodoxol-3-one (12) [18][19]. The hypervalent iodine(III) reagent 12 is reported to be a mild and effective reagent for the chlorination of nitrogen containing heterocycles which is easy to prepare and is

The mechanochemical synthesis of quinazolin-4(3H)-ones by controlling the reactivity of IBX

• Md Toufique Alam,
• Saikat Maiti and
• Prasenjit Mal

Beilstein J. Org. Chem. 2018, 14, 2396–2403, doi:10.3762/bjoc.14.216

• of primary amines and hypervalent iodine(III) reagents by controlling the reactivity using an acid salt, NaHSO4, as additive [9]. Results and Discussion The last few decades have witnessed a significant growth in organic synthesis using hypervalent iodines [10][11][12]. Their easy availability, high

Synthesis of new tricyclic 5,6-dihydro-4H-benzo[b][1,2,4]triazolo[1,5-d][1,4]diazepine derivatives by [3⁺ + 2]-cycloaddition/rearrangement reactions

• Lin-bo Luan,
• Zi-jie Song,
• Zhi-ming Li and
• Quan-rui Wang

Beilstein J. Org. Chem. 2018, 14, 1826–1833, doi:10.3762/bjoc.14.155

• the quinolones 6 and phenylhydrazine with a catalytic amount of AcOH in refluxing n-propyl alcohol. Subsequently, the hydrazones 7 were converted into the 4-acetoxy-1-acetyl-4-phenylazo-1,2,3,4-tetrahydroquinolines 8 via the oxidation with hypervalent iodine(III) reagent PhI(OAc)2 (Scheme 2) [45]. The

• -dihydro-4(1H)-quinolone 6a [46]. However, it was odd that the oxidation using the hypervalent iodine(III) reagent PhI(OAc)2 as described for phenylhydrazones 7 failed to produce the expected α-acetoxy-ethoxycarbonyl compound 12. Instead, the hydrazone 11 remained intact and was recovered. Therefore, we

Recent advances in hypervalent iodine(III)-catalyzed functionalization of alkenes

• Xiang Li,
• Pinhong Chen and
• Guosheng Liu

Beilstein J. Org. Chem. 2018, 14, 1813–1825, doi:10.3762/bjoc.14.154

• Xiang Li Pinhong Chen Guosheng Liu State Key Laboratory of Organometallic Chemistry, Center for Excellence in Molecular Synthesis, Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, 345 Lingling Road, Shanghai 200032, China 10.3762/bjoc.14.154 Abstract Hypervalent iodine(III

• hypervalent iodine(III)-catalyzed functionalization of alkenes and asymmetric reactions using a chiral iodoarene are summarized. Keywords: asymmetric catalysis; functionalization of alkenes; hypervalent iodine(III); Introduction Hypervalent iodine(III) reagents, also named as λ3-iodanes, have been widely

• occupying the equatorial positions, and the electronegative ligands are in the apical positions (Figure 1, 1 and 2) [8]. Hypervalent iodine(III) reagents are electrophile in nature, resulting from the node in a hypervalent nonbonding orbital, a 3-center-4-electron (3c-4e) bond (L–I–L), which is formed by

Synthesis of spirocyclic scaffolds using hypervalent iodine reagents

• Fateh V. Singh,
• Priyanka B. Kole,
• Saeesh R. Mangaonkar and
• Samata E. Shetgaonkar

Beilstein J. Org. Chem. 2018, 14, 1778–1805, doi:10.3762/bjoc.14.152

• reaction, active hypervalent iodine species was generated in situ by the oxidation of bis(iodoarene) 25 using mCPBA as terminal oxidant. In 2011, Kita and co-workers [72] investigated a more reactive µ-oxo bridged hypervalent iodine(III) reagent used in the spirocyclization of phenolic substrates 27 to

• in generation of active iodine(III) species. The bis(iodoarene) 81 was oxidized to a unique µ-oxo-bridged hypervalent iodine(III) species in situ, wherein PAA is used as extremely green oxidant which releases non-toxic co-products (Scheme 28). In 2011, Yu and co-workers [101] developed an

• an iodine(III)-catalyzed approach for the spirocyclization of p-substituted phenols 117 to spirocarbocyclic products 119 in good yields using a catalytic amount of iodoarene 118 and urea·H2O2 as an oxidant. Probably, the active hypervalent iodine(III) species was generated in situ by the oxidation of

Synthesis of trifluoromethylated 2H-azirines through Togni reagent-mediated trifluoromethylation followed by PhIO-mediated azirination

• Jiyun Sun,
• Xiaohua Zhen,
• Huaibin Ge,
• Guangtao Zhang,
• Xuechan An and
• Yunfei Du

Beilstein J. Org. Chem. 2018, 14, 1452–1458, doi:10.3762/bjoc.14.123

• higher temperature was unsuccessful (Table 1, entry 7). Replacing the catalyst CuI with other commonly used copper catalysts including CuCl, CuBr and CuOAc led to a decreased yield in each case (Table 1, entries 8–10). In addition the other commonly employed hypervalent iodine(III) reagents, namely, PIDA

Rapid transformation of sulfinate salts into sulfonates promoted by a hypervalent iodine(III) reagent

• Elsa Deruer,
• Vincent Hamel,
• Samuel Blais and
• Sylvain Canesi

Beilstein J. Org. Chem. 2018, 14, 1203–1207, doi:10.3762/bjoc.14.101

• hypervalent iodine(III) reagent-mediated oxidation of sodium sulfinates has been developed. This transformation involves trapping reactive sulfonium species using alcohols. With additional optimization of the reaction conditions, the method appears extendable to other nucleophiles such as electron-rich

Recyclable hypervalent-iodine-mediated solid-phase peptide synthesis and cyclic peptide synthesis

• Dan Liu,
• Ya-Li Guo,
• Jin Qu and
• Chi Zhang

Beilstein J. Org. Chem. 2018, 14, 1112–1119, doi:10.3762/bjoc.14.97

• Dan Liu Ya-Li Guo Jin Qu Chi Zhang State Key Laboratory of Elemento-Organic Chemistry, Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), College of Chemistry, Nankai University, Tianjin 300071, China 10.3762/bjoc.14.97 Abstract The system of the hypervalent iodine(III

• worth noting that FPID can be readily regenerated after the peptide coupling reaction. Keywords: cyclic peptide; FPID; hypervalent iodine(III) reagent; recyclable; solid-phase peptide synthesis (SPPS); Introduction The amide bond is one of the most fundamental functional groups in organic chemistry

• mediated by hypervalent iodine(III) reagents in recent years. In 2012, for the first time, we reported that the hypervalent iodine(III) reagent iodosodilactone (Figure 1) can serve as a condensing reagent to promote esterification, macrolactonization, amidation and peptide coupling reactions in the

Iodine(III)-mediated halogenations of acyclic monoterpenoids

• Laure Peilleron,
• Tatyana D. Grayfer,
• Joëlle Dubois,
• Robert H. Dodd and
• Kevin Cariou

Beilstein J. Org. Chem. 2018, 14, 1103–1111, doi:10.3762/bjoc.14.96

• halofunctionalizations of acyclic monoterpenoids were performed using a combination of a hypervalent iodine(III) reagent and a halide salt. In this manner, the dibromination, the bromo(trifluoro)acetoxylation, the bromohydroxylation, the iodo(trifluoro)acetoxylation or the ene-type chlorination of the distal

• 5a was obtained in 70% yield (Table 1, entry 7). Interestingly, no traces of the diiodo compound were observed even if the hypervalent iodine(III) reagent was slowly added. Transposing the previously optimized bromo(trifluoro)acetoxylation conditions but using TBAI instead of KI did not improve the

• experiments Considering the differences and similarities in the outcome of the various reaction conditions, a common mechanism with a central divergence point can be proposed. First, the diacetoxyiodobenzene reagent 7 would undergo ligand exchange with the halide to give mixed hypervalent iodine(III) 8

Selective carboxylation of reactive benzylic C–H bonds by a hypervalent iodine(III)/inorganic bromide oxidation system

• Toshifumi Dohi,
• Shohei Ueda,
• Kosuke Iwasaki,
• Yusuke Tsunoda,
• Koji Morimoto and
• Yasuyuki Kita

Beilstein J. Org. Chem. 2018, 14, 1087–1094, doi:10.3762/bjoc.14.94

• aqueous benzylic oxidations using polymeric iodosobenzene in the presence of inorganic bromide and montmorillonite-K10 [51]. In addition, a radical C–H activation strategy, using nonaqueous hypervalent iodine(III)/inorganic bromide systems that can work in organic solvents, was developed for the novel

• synthesis of lactones via the intramolecular oxidative cyclization of aryl carboxylic acids at the benzyl carbon under transition-metal-free conditions [52]. Based on our previous research and general interest in the unique reactivity of hypervalent iodine(III)–Br bonds [53][54][55][56], we report the

• initiated by the decomposition of PIFA to form the trifluoroacetoxy radical under visible light irradiation [50]. Our approach for the generation of radical species for the benzylic carboxylation using a hypervalent iodine reagent relies on the unique reactivity of the hypervalent iodine(III)–bromine bond

Hypervalent iodine(III)-mediated decarboxylative acetoxylation at tertiary and benzylic carbon centers

• Kensuke Kiyokawa,
• Daichi Okumatsu and
• Satoshi Minakata

Beilstein J. Org. Chem. 2018, 14, 1046–1050, doi:10.3762/bjoc.14.92

• formed, and the starting material was recovered. These results strongly support a reaction pathway involving the formation of an alkyl iodide, which is oxidized by PhI(OAc)2 to the corresponding hypervalent iodine(III) species that then undergoes acetoxylation. Based on the experimental results and our