Cryptophycin unit B analogues

• Thomas Schachtsiek,
• Jona Voss,
• Maren Hamsen,
• Beate Neumann,
• Hans-Georg Stammler and
• Norbert Sewald

Beilstein J. Org. Chem. 2025, 21, 526–532, doi:10.3762/bjoc.21.40

• ] to obtain free acid 11. Exchange of the Boc protecting group of dimethylaniline 8 to an acryloyl substituent and subsequent saponification furnished dimethylamine building block 13. For the macrocycle assembly, especially the ring closure, we decided on two different routes. While the cryptophycin

• containing a dimethylamino motif did not require an additional protecting group, ring closure was performed through alkene cross metathesis, which has been accomplished reliably and with good yields for other cryptophycins [11][26][27]. However, for the synthesis of a cryptophycin with a monomethylated amino

• group in unit B a suitable protecting group, i.e., allyloxycarbonyl (Alloc), must be used. Since the presence of this allylic double bond would most likely interfere with a clean reaction outcome after alkene cross metathesis, we decided for a more classical ring-closure strategy through

Molecular diversity of the reactions of MBH carbonates of isatins and various nucleophiles

• Zi-Ying Xiao,
• Jing Sun and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2025, 21, 286–295, doi:10.3762/bjoc.21.21

• have been obtained by DABCO-catalyzed dimerization of MBH carbonates of isatin in ODCB at high temperature (150 °C), which could be converted to bisspirooxindole derivatives via the isomerization of the double bond and a sequential thermal 6π-electrocyclic ring-closure process [30]. Here, the novel

Recent advances in organocatalytic atroposelective reactions

• Henrich Szabados and
• Radovan Šebesta

Beilstein J. Org. Chem. 2025, 21, 55–121, doi:10.3762/bjoc.21.6

• [27]. This transformation led to a series of axially chiral cycl[3.2.2]azines 24 in good yields and high enantiomeric purities (Scheme 8). The proposed mechanism comprises enamine activation, condensation with nitroolefin 23, ring closure, and catalyst elimination to provide the axially chiral product

Multicomponent reactions driving the discovery and optimization of agents targeting central nervous system pathologies

• Lucía Campos-Prieto,
• Aitor García-Rey,
• Eddy Sotelo and
• Ana Mallo-Abreu

Beilstein J. Org. Chem. 2024, 20, 3151–3173, doi:10.3762/bjoc.20.261

• , isocyanide, and TMSN3, after which the Ugi adduct is treated with an excess of different isocyanates resulting in the corresponding hydantoin derivatives. Finally, under microwave irradiation, the Boc group is removed under acid conditions and the benzodiazepine core is formed after ring closure (Scheme 18

Hypervalent iodine-mediated intramolecular alkene halocyclisation

• Charu Bansal,
• Oliver Ruggles,
• Albert C. Rowett and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 3113–3133, doi:10.3762/bjoc.20.258

• increased yields of cyclised product. Both 5- and 6-membered bromolactone products 69 and 70 were formed with 5-exo ring closure preferred. In addition to the synthesis of 5-chloromethyl-2-oxazolines 49, Li and co-workers reported the preparation of 5-bromomethyl-2-oxazolines 71 (Scheme 37) [48]. Treatment

Synthesis of the 1,5-disubstituted tetrazole-methanesulfonylindole hybrid system via high-order multicomponent reaction

• Cesia M. Aguilar-Morales,
• América A. Frías-López,
• Nadia V. Emilio-Velázquez,
• Alejandro Islas-Jácome,
• Angelica Judith Granados-López,
• Jorge Gustavo Araujo-Huitrado,
• Yamilé López-Hernández,
• Hiram Hernández-López,
• Luis Chacón-García,
• Jesús Adrián López and
• Carlos J. Cortés-García

Beilstein J. Org. Chem. 2024, 20, 3077–3084, doi:10.3762/bjoc.20.256

• described (Scheme 1a–c). In 2021, Dömling’s research group synthesized a series of 1,5-disubstituted tetrazole-indoles 6 in good to excellent yields via an Ugi-azide/acidic ring-closure sequence [20]. Balalaie described an efficient method in 2018 for the synthesis of a new 1,5-disubstituted tetrazole

Synthesis of tricarbonylated propargylamine and conversion to 2,5-disubstituted oxazole-4-carboxylates

• Kento Iwai,
• Akari Hikasa,
• Kotaro Yoshioka,
• Shinki Tani,
• Kazuto Umezu and
• Nagatoshi Nishiwaki

Beilstein J. Org. Chem. 2024, 20, 2827–2833, doi:10.3762/bjoc.20.238

• reacts with butyllithium, ring closure occurs between the ethynyl and carbamoyl groups, yielding 2,5-disubstituted oxazole-4-carboxylates. This cyclization also occurs when the propargylamine is heated with ammonium acetate, resulting in double activation. Keywords: acid amide; diethyl mesoxalate; N

• the N-acyl group, achieved by altering the acid amide during the reaction with DEMO [23][24][25]. Specifically, aliphatic amide 1b can be used, which reacts with lithium acetylide (3a) to yield 4e (Table 2, entry 4). Subsequently, ring closure utilizing the multifunctionality of 4 was examined (Table

• -butoxide was observed, suggesting that lithium ions activate for the ring closure. Under the conditions in Table 3, entry 3, adduct 4 underwent ring formation. This reaction was not influenced by the bulkiness of the substituent on the alkynyl group, yielding the corresponding oxazoles 5b–d (Table 3

Anion-dependent ion-pairing assemblies of triazatriangulenium cation that interferes with stacking structures

• Yohei Haketa,
• Takuma Matsuda and
• Hiromitsu Maeda

Beilstein J. Org. Chem. 2024, 20, 2567–2576, doi:10.3762/bjoc.20.215

• investigating the ion-pairing assemblies. Results and Discussion The N-(2,6-dimethylphenyl)-substituted triazatriangulenium cation 2+ was synthesized as a BF4− ion pair 2+-BF4− in 19% yield using a modified synthetic procedure for 2+-Cl− [30] (Figure 2). It should be noticed that the SNAr reaction for ring

• closure with aniline requires a base as reported by Laursen et al. [26], whereas 2,6-dimethylaniline in this study was reacted without the use of a base. This can be explained by the high nucleophilicity of 2,6-dimethylaniline, though it is sterically hindered. As counteranions affect ion-pairing

Facile preparation of fluorine-containing 2,3-epoxypropanoates and their epoxy ring-opening reactions with various nucleophiles

• Yutaro Miyashita,
• Sae Someya,
• Tomoko Kawasaki-Takasuka,
• Tomohiro Agou and
• Takashi Yamazaki

Beilstein J. Org. Chem. 2024, 20, 2421–2433, doi:10.3762/bjoc.20.206

• nonfluorinated Rf groups which sometimes suffered from the contamination of the regioisomers as a consequence of the regiorandom attack of nucleophiles [22][23][24][25][26]. Despite such significant advantage, compound 2a was previously prepared only by 1) the LDA-mediated iodination-intramolecular ring closure

Evaluating the halogen bonding strength of a iodoloisoxazolium(III) salt

• Dominik L. Reinhard,
• Anna Schmidt,
• Marc Sons,
• Julian Wolf,
• Elric Engelage and
• Stefan M. Huber

Beilstein J. Org. Chem. 2024, 20, 2401–2407, doi:10.3762/bjoc.20.204

• is produced in situ from the imidoyl chloride 9 [21]. The one-pot oxidation and ring-closure reaction [22][23] to iodoloisoxazolium(III) salt 7OTf and the salt metathesis with sodium tetrakis(3,5-bis(trifluoromethyl)phenyl)borate (NaBArF24) were then realized with 85% and 72% yield, respectively

Hydrogen-bond activation enables aziridination of unactivated olefins with simple iminoiodinanes

• Phong Thai,
• Lauv Patel,
• Diyasha Manna and
• David C. Powers

Beilstein J. Org. Chem. 2024, 20, 2305–2312, doi:10.3762/bjoc.20.197

• iminoiodinane reacts directly with the olefin to generate a short-lived alkyl-bound iodinane 7 or iodonium species 8 (Scheme 4f). Ligand coupling from 7 or extrusion of iodobenzene from 8 would furnish a carbocation intermediate 9 which could undergo C–C bond rotation prior to ring closure to form the aziridine

Harnessing the versatility of hydrazones through electrosynthetic oxidative transformations

• Aurélie Claraz

Beilstein J. Org. Chem. 2024, 20, 1988–2004, doi:10.3762/bjoc.20.175

• perchlorate as electrolyte. It is interesting to notice that the isomerization of the product and subsequent ring closure discussed above (see Scheme 17) did not occur under these conditions (Scheme 24) [73]. In 2023, Hajra et al. provided an electrochemical method for the C(sp2)–H sulfonylation of aromatic

• generation of electrophilic thiocyanogen as the initial step. Further reaction with the hydrazone 95 and deprotonation led to hydrazonoyl thiocyanate intermediate 99, which isomerized to the thermodynamically more stable isothiocyanate derivatives 100 through 1,3-shift. The latter underwent spontaneous ring

• closure to furnish the 1,2,4-triazolium 97 (Scheme 18) [65]. In the last example of this section, only one nitrogen atom of the hydrazone takes part in the cycloaddition reaction. In 2018, Zhang et al. realized the electrochemical (3 + 2)-cycloaddition of trimethylsilyl azide (102) with aldehyde-derived N

Novel oxidative routes to N-arylpyridoindazolium salts

• Oleg A. Levitskiy,
• Yuri K. Grishin and
• Tatiana V. Magdesieva

Beilstein J. Org. Chem. 2024, 20, 1906–1913, doi:10.3762/bjoc.20.166

• -stage functionalization; easily available ortho-pyridyl-substituted diarylamines are used as the precursors. Keywords: anodic oxidation; diarylamines; electrochemical cyclization; pyridoindazolium salts; reversible ring closure; Introduction Aromatic polyfused N-heterocycles are of interest as a

Syntheses and medicinal chemistry of spiro heterocyclic steroids

• Laura L. Romero-Hernández,
• Ana Isabel Ahuja-Casarín,
• Penélope Merino-Montiel,
• Sara Montiel-Smith,
• José Luis Vega-Báez and
• Jesús Sandoval-Ramírez

Beilstein J. Org. Chem. 2024, 20, 1713–1745, doi:10.3762/bjoc.20.152

• conducted via catalytic hydrogenolysis, resulting in the formation of enaminoketones 32. Finally, enaminoketones were subjected to acid hydrolysis conditions facilitating ring closure and producing the spiro-2H-furan-3-ones 33 in moderate yield (Scheme 10). This procedure was also applied to norethisterone

Chemo-enzymatic total synthesis: current approaches toward the integration of chemical and enzymatic transformations

• Ryo Tanifuji and
• Hiroki Oguri

Beilstein J. Org. Chem. 2024, 20, 1693–1712, doi:10.3762/bjoc.20.151

• and subsequent oxidation yielded aldehyde 18, a precursor for the intramolecular ring closure of the eight-membered ring. Upon treatment of 18 with BF3·Et2O, diastereoselective Prins cyclization of 18 proceeded to generate secondary alcohol 19. Subsequent one-pot treatment with (n-Bu)4NF·HF resulted

Ring opening of photogenerated azetidinols as a strategy for the synthesis of aminodioxolanes

• Henning Maag,
• Daniel J. Lemcke and
• Johannes M. Wahl

Beilstein J. Org. Chem. 2024, 20, 1671–1676, doi:10.3762/bjoc.20.148

• that target a combination of photochemical ring closure and subsequent functionalization are still underdeveloped [4][5][6][7]. Within this work, we describe our endeavours in identifying a suitable substrate to meet the photochemical requirements of the Norrish–Yang cyclization and allow for

• synthesis of azetidinols. Mechanistically, the Norrish–Yang cyclization involves a 1,5-hydrogen abstraction (HAT) step followed by ring closure to forge the azetidine scaffold (Scheme 2a, 1 → 3, via 1,4-biradical 2) [26]. The respective α-aminoacetophenones 1 were synthesized using a modular approach

Supramolecular assemblies of amphiphilic donor–acceptor Stenhouse adducts as macroscopic soft scaffolds

• Ka-Lung Hung,
• Leong-Hung Cheung,
• Yikun Ren,
• Ming-Hin Chau,
• Yan-Yi Lam,
• Takashi Kajitani and
• Franco King-Chi Leung

Beilstein J. Org. Chem. 2024, 20, 1590–1603, doi:10.3762/bjoc.20.142

• fluorescent particles pointed at by orange arrows in (c) and (d) are the clustered hBM-MSCs. Illustration of the reversible visible-light-controlled ring closure and thermal-driven ring-opening-processes of DAn and supramolecular assemblies on different length scales. Synthetic pathway to DAn. Supporting

Challenge N- versus O-six-membered annulation: FeCl₃-catalyzed synthesis of heterocyclic N,O-aminals

• Giacomo Mari,
• Lucia De Crescentini,
• Gianfranco Favi,
• Fabio Mantellini,
• Diego Olivieri and
• Stefania Santeusanio

Beilstein J. Org. Chem. 2024, 20, 1412–1420, doi:10.3762/bjoc.20.123

• to afford, by a chemospecific Lewis acid-catalyzed ring-closure protocol, valuable heterocyclic N,O-aminals (Scheme 1). Results and Discussion Since the direct functionalization of N-heterocycles offers an attractive entry to important molecular targets that might otherwise require lengthy synthetic

Stability trends in carbocation intermediates stemming from germacrene A and hedycaryol

• Naziha Tarannam,
• Prashant Kumar Gupta,
• Shani Zev and
• Dan Thomas Major

Beilstein J. Org. Chem. 2024, 20, 1189–1197, doi:10.3762/bjoc.20.101

• relative stability of carbocations resulting from protonation and ring closure of germacrene A and hedycaryol. The ring closures considered were: four molecules containing 6-6 bicyclic rings, four 5-7 bicyclic compounds with the carbocation located on the seven-membered ring and the remaining four 5-7

Kinetically stabilized 1,3-diarylisobenzofurans and the possibility of preparing large, persistent isoacenofurans with unusually small HOMO–LUMO gaps

• Qian Liu and
• Glen P. Miller

Beilstein J. Org. Chem. 2024, 20, 1099–1110, doi:10.3762/bjoc.20.97

• -diarylisobenzofurans 3 and 23. The latter reductions in the presence of zinc likely proceed through the corresponding ketols which are known to undergo ring closure in acidic solution [10][11]. These syntheses utilizing mesitylene or 1,3,5-triethylbenzene are considerably simpler than other approaches that would place

Chemoenzymatic synthesis of macrocyclic peptides and polyketides via thioesterase-catalyzed macrocyclization

• Senze Qiao,
• Zhongyu Cheng and
• Fuzhuo Li

Beilstein J. Org. Chem. 2024, 20, 721–733, doi:10.3762/bjoc.20.66

• several positions and also form 6–14 residue cyclic peptides [37][38]. It should be noted that TycC TE was more sensitive to the amino acid changes near the site of ring closure. The alkyne-containing analogs were conjugated to a variety of azido sugars via copper(I)-catalyzed cycloaddition to obtain the

Synthesis of π-conjugated polycyclic compounds by late-stage extrusion of chalcogen fragments

• Aissam Okba,
• Pablo Simón Marqués,
• Kyohei Matsuo,
• Naoki Aratani,
• Hiroko Yamada,
• Gwénaël Rapenne and
• Claire Kammerer

Beilstein J. Org. Chem. 2024, 20, 287–305, doi:10.3762/bjoc.20.30

• synthesis and a final closure of the 7-membered ring by C–C bond formation. This is in sharp contrast with the widely adopted strategy relying on the late-stage insertion of the sulfur atom with concomitant ring closure, using either electrophilic or nucleophilic sulfur reagents. By way of example, thiepine

• naphthyl substituents carrying each an alkyne moiety on the ortho position. Ring expansion of both thiophene units in 19 was then triggered by platinum catalysis to generate the corresponding thiopyrans, and finally the bromine atoms located on the latter rings were exploited for the ring closure of the

Perspectives on push–pull chromophores derived from click-type [2 + 2] cycloaddition–retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

• Michio Yamada

Beilstein J. Org. Chem. 2024, 20, 125–154, doi:10.3762/bjoc.20.13

• -tetracyano-p-quinodimethane (TCNQ), results in the formation of a zwitterionic intermediate, wherein the negative charge evolves into a stabilized carbanion (dicyanomethide anion). Subsequently, the ring closure of the zwitterionic intermediate generates the corresponding cyclobutene intermediate. Finally

Synthesis of N-acyl carbazoles, phenoxazines and acridines from cyclic diaryliodonium salts

• Nils Clamor,
• Mattis Damrath,
• Thomas J. Kuczmera,
• Daniel Duvinage and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2024, 20, 12–16, doi:10.3762/bjoc.20.2

• followed by a ring-closure starting from 2,2'-diiodo-1,1'-biphenyls [15][16][17]. Related one-pot procedures are also described (Scheme 1b) [18][19]. Such 2,2´-dihalobiphenyls are established starting materials for synthesizing a variety of heterocycles. Usually, their utilization leads to the production

Thienothiophene-based organic light-emitting diode: synthesis, photophysical properties and application

• Recep Isci and
• Turan Ozturk

Beilstein J. Org. Chem. 2023, 19, 1849–1857, doi:10.3762/bjoc.19.137

• synthesis commenced with the treatment of 3-bromothiophene (1) with n-butyllithium at −78 °C, followed by the addition of elemental sulfur and subsequent reaction with 2-bromo-1-(4-methoxyphenyl)ethanone to produce compound 2 in 83% yield. The following ring-closure reaction was conducted in the presence of