Synthesis and characterization of water-soluble C₆₀–peptide conjugates

• Yue Ma,
• Lorenzo Persi and
• Yoko Yamakoshi

Beilstein J. Org. Chem. 2024, 20, 777–786, doi:10.3762/bjoc.20.71

• LED lamp (527 nm) for 1 min or 10 min. PS: 40 μM, 4-oxo-TEMP: 80 mM, in 60 mM phosphate buffer (pH 7.0). Measurement conditions: temperature 296 K, microwave frequency 10.03 GHz, microwave power 10 mW, receiver gain 5.0 × 104, modulation amplitude 1.00 G, modulation frequency 100 KHz, sweep time 83.89

Research progress on the pharmacological activity, biosynthetic pathways, and biosynthesis of crocins

• Zhongwei Hua,
• Nan Liu and
• Xiaohui Yan

Beilstein J. Org. Chem. 2024, 20, 741–752, doi:10.3762/bjoc.20.68

• extracting crocins include ultrasound-assisted extraction (UAE), supercritical fluid extraction, enzyme-linked extraction, and microwave-assisted extraction. Among these methods, the UAE exhibits a higher extraction yield [23][24]. Recently, Fiorito et al. developed a technique that utilizes cost-effective

HPW-Catalyzed environmentally benign approach to imidazo[1,2-a]pyridines

• Luan A. Martinho and
• Carlos Kleber Z. Andrade

Beilstein J. Org. Chem. 2024, 20, 628–637, doi:10.3762/bjoc.20.55

• is known for its chemical and thermal stability. Herein, we report a straightforward approach to the GBB-3CR using HPW as catalyst in ethanol under microwave (μw) heating. This convenient environmentally benign methodology is broad in scope, provides the heterobicyclic products in high yields (up to

• existing ones. Keywords: GBB-3CR; imidazo[1,2-a]pyridine; microwave; phosphotungstic acid; Introduction Imidazo[1,2-a]pyridine is a privileged structure that plays an important role in organic synthesis and in the pharmaceutical industry. This scaffold is present in drugs with several biological

• catalyst in ethanol under microwave (μw) heating. This convenient environmentally benign methodology is broad in scope, provides the heterobicyclic products in high yields (up to 99%), with a low catalyst loading (2 mol %) in only 30 minutes. Results and Discussion A search in the literature revealed a

Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

• development of greener synthetic technologies, like photocatalysis, organocatalysis, the use of nanocatalysts, microwave irradiation, ball milling, continuous flow, and many more. Thus, in this review, we summarize the medicinal properties of BIMs and the developed BIM synthetic protocols, utilizing the

• various oxidation and hydrogenation reactions [105]. NanoAg-Pt doped silicate constitutes an efficient and recyclable catalyst that can be reused without a notable loss in catalytic activity (Scheme 17). Wanting to avoid the use of conventional heating, Karthikeyan and his co-workers turned to microwave

• rendered inactive. Thus, Karthikeyan’s approach implemented faster reaction rates, while avoiding conventional heating with the application of microwave-assisted irradiation in solvent-free conditions with the drawback of limiting the generality of his methodology [105]. In 2014, Chabukswar and his

Metal-catalyzed coupling/carbonylative cyclizations for accessing dibenzodiazepinones: an expedient route to clozapine and other drugs

• Amina Moutayakine and
• Anthony J. Burke

Beilstein J. Org. Chem. 2024, 20, 193–204, doi:10.3762/bjoc.20.19

• suitable surrogate. Not only that, the use of safer to use surrogates, is important for use in enabling technologies, like continuous flow and microwave-heated reactions. In fact, CO-free aminocarbonylation reactions are well known, and molybdenum hexacarbonyl (Mo(CO)6) is a very useful surrogate having

Synthesis of the 3’-O-sulfated TF antigen with a TEG-N₃ linker for glycodendrimersomes preparation to study lectin binding

• Mark Reihill,
• Hanyue Ma,
• Dennis Bengtsson and
• Stefan Oscarson

Beilstein J. Org. Chem. 2024, 20, 173–180, doi:10.3762/bjoc.20.17

• in formation of a homogenous solution, but still no conversion to the sulfated product, even when the temperature was raised to 80 °C [28][29]. Switching the sulfating reagent to SO3·Py or performing the reaction at 150 °C in a microwave did not improve the outcome [30][31]. Since there was no

Decarboxylative 1,3-dipolar cycloaddition of amino acids for the synthesis of heterocyclic compounds

• Xiaofeng Zhang,
• Xiaoming Ma and
• Wei Zhang

Beilstein J. Org. Chem. 2023, 19, 1677–1693, doi:10.3762/bjoc.19.123

• for 6 h to afford the monocycloaddition compounds. Without isolation, the reaction mixtures were then used for the N-propargylation in the presence of K2CO3 under microwave heating at 110 °C for 1 h to give triazolobenzodiazepines 21a–f in 35–65% yields with 2:1 to 7:1 dr (Scheme 13). Other than 2

C–H bond functionalization: recent discoveries and future directions

• Indranil Chatterjee

Beilstein J. Org. Chem. 2023, 19, 1568–1569, doi:10.3762/bjoc.19.114

• techniques. Some energy-economic reactors such as ball mill, microwave, ultrasound and, most importantly, flow reactors have also evolved towards a more sustainable future. To showcase the modern approaches in this domain, this thematic issue in the Beilstein Journal of Organic Chemistry gathers recent

N-Sulfenylsuccinimide/phthalimide: an alternative sulfenylating reagent in organic transformations

• Fatemeh Doraghi,
• Seyedeh Pegah Aledavoud,
• Mehdi Ghanbarlou,
• Bagher Larijani and
• Mohammad Mahdavi

Beilstein J. Org. Chem. 2023, 19, 1471–1502, doi:10.3762/bjoc.19.106

• -thiophthalimides led to sulfenamides promoted by 2-ethoxyethanol under microwave irradiation [100]. Alkylamines, such as morpholine, cyclohexylamine, pyrrolidine, and tert-butylamine were participated in this coupling process. All reactions occurred in a shorter time with higher chemical yields compared to the

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• of the NHC-precursor, i.e. an azolium salt with cuprous oxide using a solvent or under microwave conditions (Scheme 17). Kolychev in 2009 attempted the preparation of NHC–Cu(I) complexes via deprotonation by heating of amidinium salt 53 [(7-Dipp)H][Br] with Cu2O in the presence of sodium acetate in

• , Cazin and co-workers reported the synthesis of Cu(I) complexes 61, 63, and 65 of the so-called ‘abnormal’ NHCs (Scheme 21) [35]. Thus, the conventional heating method as well as microwave irradiation methods were employed. The structures of the synthesized complexes were confirmed by X-ray analysis

• thiazolylidene–CuBr complexes 67a–e through microwave-assisted deprotonation of N-alkylthiazolium/benzothiazolium bromides with Cu2O in the presence of MeCN/AcOH and molecular sieves. The complexes were obtained in high (84–96%) yields (Scheme 22) [36]. 1.3 Transmetallation The free NHC route, although still

Exploring the role of halogen bonding in iodonium ylides: insights into unexpected reactivity and reaction control

• Carlee A. Montgomery and
• Graham K. Murphy

Beilstein J. Org. Chem. 2023, 19, 1171–1190, doi:10.3762/bjoc.19.86

• have been evaluated extensively through both qualitative and quantitative means. Methods of evaluation have included X-ray crystallography and spectroscopy (e.g., microwave, IR, Raman, NMR, NQR), as well as through computational determination of their electrostatic VS,max potentials (Figure 2), their

Clauson–Kaas pyrrole synthesis using diverse catalysts: a transition from conventional to greener approach

• Dileep Kumar Singh and
• Rajesh Kumar

Beilstein J. Org. Chem. 2023, 19, 928–955, doi:10.3762/bjoc.19.71

• -dimethoxytetrahydrofuran; green synthesis; microwave-assisted reaction; N-substituted pyrrole; Introduction Heterocyclic compounds are the most explored molecules in organic chemistry in terms of their synthesis and various applications. Among the diverse heterocyclic compounds, N-containing heterocycles are found in

• to reduce energy consumption and the carbon footprint. The traditional heating techniques used to synthesize compounds are being replaced by contemporary green alternative energy systems, such as photocatalysis, microwave irradiation, ultrasonic irradiation, grinding, and ball milling processes

• procedure is explained in the first section, and the green protocol is covered in the second (Figure 2). The second section is further divided into three subsections that covers the various eco-friendly green processes used, such as, (i) reactions in water, (ii) solvent-free reactions, (iii) microwave

Enolates ambushed – asymmetric tandem conjugate addition and subsequent enolate trapping with conventional and less traditional electrophiles

• Péter Kisszékelyi and
• Radovan Šebesta

Beilstein J. Org. Chem. 2023, 19, 593–634, doi:10.3762/bjoc.19.44

Transition-metal-catalyzed domino reactions of strained bicyclic alkenes

• Austin Pounder,
• Eric Neufeld,
• Peter Myler and
• William Tam

Beilstein J. Org. Chem. 2023, 19, 487–540, doi:10.3762/bjoc.19.38

Transition-metal-catalyzed C–H bond activation as a sustainable strategy for the synthesis of fluorinated molecules: an overview

• Louis Monsigny,
• Floriane Doche and
• Tatiana Besset

Beilstein J. Org. Chem. 2023, 19, 448–473, doi:10.3762/bjoc.19.35

• acrylamide derivatives [140]. Using the same directing group, a panel of α-arylacrylamide derivatives 39a–f was successfully functionalized with a high Z-selectivity (yields up to 98%, Scheme 18). Both, thermal reaction conditions (DMSO at 70 °C for 16 h) and microwave irradiation (100 °C using microwaves in

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• , Locos et al. [31] successfully used the Cu(I)-catalyzed click reaction to synthesize triazole-linked glycoporphyrins under microwave conditions. At first, the glycoporphyrins 43a,b were synthesized in good yields by the reaction between zinc(II) 5-(4-azidophenyl)-10,15,20-triphenylporphyrin (39a) and

• microwave conditions as described in Scheme 12. After the successful synthesis of porphyrins 63 and 66b, their corresponding rhenium complexes 64a and 67a were prepared in good yields by using [Re(CO)3Br3][NEt4]2 at 65 °C in 2 hours. In addition to these, the radiolabeled products 64b and 67b were also

• conjugates (99a–d, 103a,b) were utilized for the preparation of porphyrin-fullerene dyads 100a–d and 104a,b in 30–70% yield by the reaction with C60 and sarcosine in toluene under microwave conditions. The photophysical and computational studies of these ZnP-Tri-C60 conjugates revealed that the 1,2,3

Group 13 exchange and transborylation in catalysis

• Dominic R. Willcox and
• Stephen P. Thomas

Beilstein J. Org. Chem. 2023, 19, 325–348, doi:10.3762/bjoc.19.28

• esters, lactones, and carbonates with HBpin under microwave irradiation (Scheme 13) [57]. When HBpin and boric acid were reacted together, BH3-coordinated HBpin and O(Bpin)2 were detected by 11B NMR spectroscopy. Supported by computational analysis and single-turnover experiments, the reaction was

Continuous flow synthesis of 6-monoamino-6-monodeoxy-β-cyclodextrin

• János Máté Orosz,
• Dóra Ujj,
• Petr Kasal,
• Gábor Benkovics and
• Erika Bálint

Beilstein J. Org. Chem. 2023, 19, 294–302, doi:10.3762/bjoc.19.25

• efficient reaction used so far for the selective monofunctionalization of CDs [1]. Besides traditional synthetic methods, alternative techniques, such as ultrasound and microwave irradiation [21], as well as mechanosynthesis [22][23] for the functionalizations, such as tosylation or azidation of CDs have

Strategies to access the [5-8] bicyclic core encountered in the sesquiterpene, diterpene and sesterterpene series

• Cécile Alleman,
• Charlène Gadais,
• Laurent Legentil and
• François-Hugues Porée

Beilstein J. Org. Chem. 2023, 19, 245–281, doi:10.3762/bjoc.19.23

Preparation of β-cyclodextrin-based dimers with selectively methylated rims and their use for solubilization of tetracene

• Konstantin Lebedinskiy,
• Volodymyr Lobaz and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2022, 18, 1596–1606, doi:10.3762/bjoc.18.170

• catalytical amounts (0.02 equiv) [27] to semi-equivalent [12]. Optimal conditions for a click reaction are a subject to discovery in every case, because temperature, microwave or ultrasonic irradiation, and type of catalyst strongly influence the reaction time and yields. In the preparation of dimer 4, the

An alternative C–P cross-coupling route for the synthesis of novel V-shaped aryldiphosphonic acids

• Stephen J. I. Shearan,
• Enrico Andreoli and
• Marco Taddei

Beilstein J. Org. Chem. 2022, 18, 1518–1523, doi:10.3762/bjoc.18.160

• of us, was limited to 0.543 g (1 mmol) of substrate. Scale up of this protocol was not attempted, but it might become problematic due to issues with microwave penetration in a medium that contains a strong absorber, such as the Ni catalytic complex. In this work, we have employed either 5.0 g (15.3

• phosphonate syntheses with the alternative method proposed in this work. The microwave-assisted method made use of a pressure-resistant vessel due to considerable pressure buildup (≈ 10 bar), while the other methods were run under reflux conditions. Supporting Information Supporting Information File 348: NMR

Cyclometalated iridium complexes-catalyzed acceptorless dehydrogenative coupling reaction: construction of quinoline derivatives and evaluation of their antimicrobial activities

• Hongling Shui,
• Yuhong Zhong,
• Renshi Luo,
• Zhanyi Zhang,
• Jiuzhong Huang,
• Ping Yang and
• Nianhua Luo

Beilstein J. Org. Chem. 2022, 18, 1507–1517, doi:10.3762/bjoc.18.159

• . In addition, Aravinda's group [11] prepared 3-(1,3-dioxolan-2-yl)benzo[h]quinolines containing thiol and selenol groups in one pot by microwave irradiation, and tested the antibacterial activity of the compounds. The results showed that the antibacterial effect of some compounds was better than

Modular synthesis of 2-furyl carbinols from 3-benzyldimethylsilylfurfural platforms relying on oxygen-assisted C–Si bond functionalization

• Sebastien Curpanen,
• Per Reichert,
• Gabriele Lupidi,
• Giovanni Poli,
• Julie Oble and
• Alejandro Perez-Luna

Beilstein J. Org. Chem. 2022, 18, 1256–1263, doi:10.3762/bjoc.18.131

• . Procedure for the Cu-catalyzed allylation and methylation of C3-benzyldimethylsilyl-substituted 2-furyl carbinols (preparation of compounds 21 and 23–28) CuI⋅PPh3 [37] (20 or 120 mol %) was introduced to a flame-dried microwave vial, which was then placed under an argon atmosphere and sealed. In a Schlenk

Mechanochemical bottom-up synthesis of phosphorus-linked, heptazine-based carbon nitrides using sodium phosphide

• Blaine G. Fiss,
• Georgia Douglas,
• Michael Ferguson,
• Jorge Becerra,
• Jesus Valdez,
• Trong-On Do,
• Tomislav Friščić and
• Audrey Moores

Beilstein J. Org. Chem. 2022, 18, 1203–1209, doi:10.3762/bjoc.18.125

• minimize the bandgap of these metal-free photocatalysts, as well as improve their overall stability. Traditional routes to incorporate phosphorus have relied on high-temperature [7] or microwave [8] syntheses, and often proceed through the introduction of a phosphorus atom within the heptazine ring, which

Derivatives of benzo-1,4-thiazine-3-carboxylic acid and the corresponding amino acid conjugates

• Péter Kisszékelyi,
• Tibor Peňaška,
• Klára Stankovianska,
• Mária Mečiarová and
• Radovan Šebesta

Beilstein J. Org. Chem. 2022, 18, 1195–1202, doi:10.3762/bjoc.18.124

• 1,3-dicarbonyl compounds using a catalytic amount of hydrazine hydrate without solvent in a short reaction time (10 min) [14]. Reactions of 2-aminothiophenols with β-keto esters and β-diketones under microwave irradiation (MWI) using basic alumina as heterogeneous catalyst without solvent afforded 4H