Homogeneous continuous flow nitration of O-methylisouronium sulfate and its optimization by kinetic modeling

• Jiapeng Guo,
• Weike Su and
• An Su

Beilstein J. Org. Chem. 2024, 20, 2408–2420, doi:10.3762/bjoc.20.205

• values of k0 at different temperatures, the activation energy for the electrophilic attack of NO2+ on the IO can be calculated by the Arrhenius equation: where R is the molar gas constant and T denotes the temperature in Kelvin, and Ea and A are the activation energy and pre-exponential factors for the

Evaluating the halogen bonding strength of a iodoloisoxazolium(III) salt

• Dominik L. Reinhard,
• Anna Schmidt,
• Marc Sons,
• Julian Wolf,
• Elric Engelage and
• Stefan M. Huber

Beilstein J. Org. Chem. 2024, 20, 2401–2407, doi:10.3762/bjoc.20.204

• in a Mannich reaction [4]. In 2018, our group showed in a proof-of-principle study [5] that the Lewis acid catalysis by DAI salts is based on halogen bonding (XB), an interaction between a Lewis base (XB acceptor) and an electrophilic halogen atom in the Lewis acid (XB donor) [6][7][8][9][10]. In

Asymmetric organocatalytic synthesis of chiral homoallylic amines

• Nikolay S. Kondratyev and
• Andrei V. Malkov

Beilstein J. Org. Chem. 2024, 20, 2349–2377, doi:10.3762/bjoc.20.201

• excellent enantioselectivities (89–98% ee) and low to moderate yields (48–72%). The homologation step proceeds via the stereoretentive 1,2-migration of the vinyl group from the tetracoordinated boron to the highly electrophilic carbon of the diazomethane, concerted with the elimination of the nitrogen

• transfer reagents; (iv) direct metal-free imine carbanion addition to electrophilic alkene. Class (i) underwent an evolution from catalysis by covalent interaction to chiral hydrogen-bonded catalysis, which allowed the expansion of the allyl component scope from simple allyl to substituted allyl groups

Improved deconvolution of natural products’ protein targets using diagnostic ions from chemical proteomics linkers

• Andreas Wiest and
• Pavel Kielkowski

Beilstein J. Org. Chem. 2024, 20, 2323–2341, doi:10.3762/bjoc.20.199

• /off-target protein and a tested NP or a similar active small compound (Figure 1). The covalent bond serving this purpose can be formed in two distinct ways: either the NP or small compound already contains a reactive, often electrophilic group directly or the reactive group, for example a photo

Hydrogen-bond activation enables aziridination of unactivated olefins with simple iminoiodinanes

• Phong Thai,
• Lauv Patel,
• Diyasha Manna and
• David C. Powers

Beilstein J. Org. Chem. 2024, 20, 2305–2312, doi:10.3762/bjoc.20.197

• general, transition metal catalysts are required to effect efficient NGT to unactivated olefins because iminoiodinanes are insufficiently electrophilic to engage in direct aziridination chemistry. Here, we demonstrate that 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) activates N-arylsulfonamide-derived

gem-Difluorination of carbon–carbon triple bonds using Brønsted acid/Bu₄NBF₄ or electrogenerated acid

• Mizuki Yamaguchi,
• Hiroki Shimao,
• Kengo Hamasaki,
• Keiji Nishiwaki,
• Shigenori Kashimura and
• Kouichi Matsumoto

Beilstein J. Org. Chem. 2024, 20, 2261–2269, doi:10.3762/bjoc.20.194

• fluorinating reagents, such as diethylaminosulfur trifluoride (DAST), HF, CsF, and AgF has been established as a reliable method. Electrophilic fluorinating reagents, such as 1-chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (Selectfluor), N-fluorobenzenesulfonimide, and

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

• with electrophiles, such as deuteration or electrophilic chlorination using N-chlorosuccinimide, in this consecutive three-component synthesis to give persubstituted pyrazoles 165 (Scheme 55) [162]. (3 + 2)-Cycloaddition – C2 building blocks as substrates 1,3-Dipolar cycloadditions are important

Harnessing the versatility of hydrazones through electrosynthetic oxidative transformations

• Aurélie Claraz

Beilstein J. Org. Chem. 2024, 20, 1988–2004, doi:10.3762/bjoc.20.175

• generation of electrophilic thiocyanogen as the initial step. Further reaction with the hydrazone 95 and deprotonation led to hydrazonoyl thiocyanate intermediate 99, which isomerized to the thermodynamically more stable isothiocyanate derivatives 100 through 1,3-shift. The latter underwent spontaneous ring

• ) atom were well tolerated and the best result was obtained with a morpholine ring. Based on cyclic voltammetry studies, the transformation initiated with the anodic oxidation of hydrazone 101 to form highly electrophilic radical cationic species 104. Subsequent addition of azide 102 and desilylation

• species to be oxidized, initial SET anodic oxidation of the hydrazone furnishes the highly electrophilic radical cation species D, which undergo nucleophilic addition of the second partner and deprotonation to produce hydrazinyl radical F (route a). Alternatively, if the partner possesses a lower

Development of a flow photochemical process for a π-Lewis acidic metal-catalyzed cyclization/radical addition sequence: in situ-generated 2-benzopyrylium as photoredox catalyst and reactive intermediate

• Masahiro Terada,
• Zen Iwasaki,
• Ryohei Yazaki,
• Shigenobu Umemiya and
• Jun Kikuchi

Beilstein J. Org. Chem. 2024, 20, 1973–1980, doi:10.3762/bjoc.20.173

• Abstract A flow photochemical reaction system for a π-Lewis acidic metal-catalyzed cyclization/radical addition sequence was developed, which utilizes in situ-generated 2-benzopyrylium intermediates as the photoredox catalyst and electrophilic substrates. The key 2-benzopyrylium intermediates were

Radical reactivity of antiaromatic Ni(II) norcorroles with azo radical initiators

• Siham Asyiqin Shafie,
• Ryo Nozawa,
• Hideaki Takano and
• Hiroshi Shinokubo

Beilstein J. Org. Chem. 2024, 20, 1967–1972, doi:10.3762/bjoc.20.172

• through denitrogenation of AIBN, is closer to the HOMO level of Ni(II) norcorrole 1 (−4.68 eV) rather than its LUMO (−3.16 eV). This result explains the selective addition of the electrophilic isobutyronitrile radical to the distal α-position of the pyrrole unit. The calculated molecular orbital

• coefficient of the HOMO indicates that two α-carbon atoms of the pyrrole subunits are the most reactive positions for electrophilic species. In addition, the distal α-carbon atom relative to the meso-position could be more reactive than the proximal α-carbon atom due to the steric hindrance of bulky mesityl

• subsequent demetallation. Conclusion In conclusion, we have investigated the addition reaction of electrophilic alkyl radicals derived from azo radical initiators to antiaromatic Ni(II) norcorroles. The reaction smoothly proceeded to afford bowl-shaped nonconjugated macrocycles 2a in excellent yield, which

1,2-Difluoroethylene (HFO-1132): synthesis and chemistry

• Liubov V. Sokolenko,
• Taras M. Sokolenko and
• Yurii L. Yagupolskii

Beilstein J. Org. Chem. 2024, 20, 1955–1966, doi:10.3762/bjoc.20.171

• 1,2-difluoroethylene (HFO-1132). The major routes for the preparation of the E- and Z-isomer of HFO-1132 are reviewed, along with the chemistry in radical, nucleophilic, and electrophilic reactions. Keywords: 1,2-difluoroethylene; fluorinated monomers; HFO-1132; hydrofluoroolefins; radical reactions

• ]. In this electrophilic reaction, two products were formed in 3:1 ratio (Scheme 17) in a very low yield of 0.4%. In patent literature [95], radical reaction of 1,2-difluoroethylene with long-chain perfluoroalkyl iodides (CnF2n + 1I, n = 2–8) was described (Scheme 18). Products formed were further

• transitional metal complexes with 1,2-difluoroethylene as a ligand should be mentioned [109][110][111]. Conclusion In conclusion, our literature analysis demonstrated that radical processes are most typical for 1,2-difluoroethylene, while examples of electrophilic reactions are scarce, and nucleophilic

Regioselective alkylation of a versatile indazole: Electrophile scope and mechanistic insights from density functional theory calculations

• Pengcheng Lu,
• Luis Juarez,
• Paul A. Wiget,
• Weihe Zhang,
• Krishnan Raman and
• Pravin L. Kotian

Beilstein J. Org. Chem. 2024, 20, 1940–1954, doi:10.3762/bjoc.20.170

• to be driven by stabilizing non-covalent interactions. Specifically, the carbonyl O in N2-s-cis shows NCIs with one of the benzene rings of PPh3 as well as a hydrogen bond-like NCI with a H-atom of the electrophilic methyl. Thus, the partitioning between transition states favor the N2-pathway over

• critically N1, position the electrophilic methyl group 2.1 Å from N2, lowering the TS energy by ΔΔG‡ = 2.6 kcal/mol in 18-N1-Cs. Interestingly, the difference in product energies is quite small, only favoring the N1-product, 18-N1, by 0.6 kcal/mol. Concerning conditions B, the difference between the neutral

• indazole and the deprotonated indazole was only −0.2 kcal/mol (Figure 11). Again, no preorganized intermediates were found. The NCIs were consistent with the parent system. The hydrogen bond between the H on the electrophilic methyl group and an ester oxygen was found in the transition state leading to the

Solvent-dependent chemoselective synthesis of different isoquinolinones mediated by the hypervalent iodine(III) reagent PISA

• Ze-Nan Hu,
• Yan-Hui Wang,
• Jia-Bing Wu,
• Ze Chen,
• Dou Hong and
• Chi Zhang

Beilstein J. Org. Chem. 2024, 20, 1914–1921, doi:10.3762/bjoc.20.167

• aforementioned control experiment and literature precedents, we proposed a mechanism for the formation of 4-substituted isoquinolinone derivatives, including 2a. The reaction begins by tautomerization of 1a, and PISA undergoes an electrophilic reaction with 1a' to form the iodane intermediate A. The iodane A

• then undergoes a proton shift to provide intermediate B. Intermediate B collapses via reductive elimination to give nitrenium ion C, along with the release of iodobenzene and sulfamate. Finally, nucleophilic attack of the olefin moiety of C on the electrophilic nitrogen atom, followed by the

• substrate 1c may act as an electrophilic center, forming a C–O bond with the alkenyl group to give the isochromen-1-one oxime product 2c'. When wet HFIP was used as the solvent, the reaction followed a different pathway. HFIP, a strong hydrogen bonding donor [26][27][28], interacts with the amide moiety of

Novel oxidative routes to N-arylpyridoindazolium salts

• Oleg A. Levitskiy,
• Yuri K. Grishin and
• Tatiana V. Magdesieva

Beilstein J. Org. Chem. 2024, 20, 1906–1913, doi:10.3762/bjoc.20.166

• formed in oxidation. Since oxidation occurs in the bulk and the potential of the mediator is insufficient for the further oxidation of the electrophilic CF3-substituted diarylaminyl radicals to the corresponding cations, the N–N coupling of thus formed aminyl radicals dominates over the intramolecular

The Groebke–Blackburn–Bienaymé reaction in its maturity: innovation and improvements since its 21st birthday (2019–2023)

• Cristina Martini,
• Muhammad Idham Darussalam Mardjan and
• Andrea Basso

Beilstein J. Org. Chem. 2024, 20, 1839–1879, doi:10.3762/bjoc.20.162

• of chalcogen-based noncovalent organocatalysts. In 2023, Bolotin et al. published another article on the same subject [15], reporting a general improvement of electrophilic activation of carbonyl and imino groups by synergetic effect of aryl iodonium salts and silver cations. However, when similar

Oxidative fluorination with Selectfluor: A convenient procedure for preparing hypervalent iodine(V) fluorides

• Samuel M. G. Dearman,
• Xiang Li,
• Yang Li,
• Kuldip Singh and
• Alison M. Stuart

Beilstein J. Org. Chem. 2024, 20, 1785–1793, doi:10.3762/bjoc.20.157

•  2, entry 3) or at 40 °C for 6 hours (Table 2, entry 4). Finally, reducing the amount of Selectfluor to 1.5 equivalents led to an excellent 90% isolated yield and the conclusion that Selectfluor delivered one electrophilic fluorine (from the N–F) and one nucleophilic fluoride (from the

Syntheses and medicinal chemistry of spiro heterocyclic steroids

• Laura L. Romero-Hernández,
• Ana Isabel Ahuja-Casarín,
• Penélope Merino-Montiel,
• Sara Montiel-Smith,
• José Luis Vega-Báez and
• Jesús Sandoval-Ramírez

Beilstein J. Org. Chem. 2024, 20, 1713–1745, doi:10.3762/bjoc.20.152

• nucleophilic and can lead to the formation of five- or six-membered rings, the authors proposed that the thione group of ii was tautomerized to an iminothiol, from which the sulfur atom attacked the most electrophilic site of the epoxide (which was activated by protonation), producing the spiro-1,3,4

Methyltransferases from RiPP pathways: shaping the landscape of natural product chemistry

• Maria-Paula Schröder,
• Isabel P.-M. Pfeiffer and
• Silja Mordhorst

Beilstein J. Org. Chem. 2024, 20, 1652–1670, doi:10.3762/bjoc.20.147

• triethylsilane in TFA-CH3Cl, resulting in the N-methylated amino acid as the final product [38]. The third method for chemical N-methylation involves the use of protection groups that also enhance the reactivity of the primary amine (Figure 2). Once the amine is deprotonated, an electrophilic methylation reagent

• thiostrepton A, which is known to be produced by different Streptomyces strains [126][127]. During the maturation of thiostrepton A, a quinaldic moiety is formed from tryptophan. TsrM catalyses the initial step by transferring a methyl group from SAM to the electrophilic carbon atom C2 of tryptophan. In the

pKalculator: A pK_a predictor for C–H bonds

• Rasmus M. Borup,
• Nicolai Ree and
• Jan H. Jensen

Beilstein J. Org. Chem. 2024, 20, 1614–1622, doi:10.3762/bjoc.20.144

• combination with an ML model to predict a variety of properties. These properties encompass the site of metabolism [31][33], the strengths of hydrogen bond donors and acceptors [34][35][36], and the regioselectivity of electrophilic aromatic substitution reactions [14]. Building on the methodology from

• classifier as Ree et al. [14] have shown the opposite to be true for electrophilic aromatic substitutions. However, our regression model serves a dual function, that is, it accurately predicts pKa values and identifies the reaction site. Prediction of aryl C–H borylation sites In the previous section, we

Divergent role of PIDA and PIFA in the AlX₃ (X = Cl, Br) halogenation of 2-naphthol: a mechanistic study

• Kevin A. Juárez-Ornelas,
• Manuel Solís-Hernández,
• Pedro Navarro-Santos,
• J. Oscar C. Jiménez-Halla and
• César R. Solorio-Alvarado

Beilstein J. Org. Chem. 2024, 20, 1580–1589, doi:10.3762/bjoc.20.141

• protocol for the electrophilic bromination of arenes, mainly phenols [28][29]. Accordingly, the bromination reaction was initially explored by mixing PIFA and AlBr3, which gave an acceptable yield (84%). However, other iodine(III) reagents were tested as oxidants during the optimization process. Thus, when

• electrophilic iodine(III) center through TS1–Br, which has a feasible energy barrier of 8.3 kcal/mol. The I–Br and Br–Al bond lengths are 3.15 and 2.78 Å, respectively, and the I–Br–Al angle is 93.1o, which is close to the common T-shape of such hypervalent iodine(III) species. This step releases the

Benzylic C(sp³)–H fluorination

• Alexander P. Atkins,
• Alice C. Dean and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 1527–1547, doi:10.3762/bjoc.20.137

• mechanistic strategies, namely, electrophilic, radical and nucleophilic approaches, and highlighted when emerging technologies, such as photo- and electrochemistry effect the desired transformation [22][27]. Review Electrophilic benzylic C(sp3)–H fluorination Base mediated Electrophilic fluorinating reagents

• subsequently attack electrophilic Selectfluor to afford the benzyl fluoride (Figure 2) [34]. The methodology was demonstrated on eight para-substituted benzylic substrates. The authors noted that resubjecting the monofluorinated compound 1 to the same reaction conditions afforded the difluorinated compound 2

• monofluorination radiolabelling using [18F]NFSI. Electrophilic fluorination of benzylic C–H bonds has been demonstrated as a powerful approach. However, these techniques can be constrained to defined substrate classes and the requirement of using strong bases. Palladium catalysis Palladium-catalysed chemistry is

Tetrabutylammonium iodide-catalyzed oxidative α-azidation of β-ketocarbonyl compounds using sodium azide

• Christopher Mairhofer,
• David Naderer and
• Mario Waser

Beilstein J. Org. Chem. 2024, 20, 1510–1517, doi:10.3762/bjoc.20.135

• addition, the recent years have seen remarkable progress in utilizing electrophilic azide-transfer reagents, i.e., hypervalent iodine-based compounds, for (asymmetric) α-azidations [16][17][18][19][20][21][22][23]. Besides these valuable approaches, which either require appropriate pre-functionalization of

• the starting materials (nucleophilic approach), or rely on more advanced N3-transfer agents (electrophilic approach), over the course of the last years also α-azidations of enolate-type precursors using nucleophilic azide sources under oxidative conditions have been introduced very successfully [24

Synthesis of 2-benzyl N-substituted anilines via imine condensation–isoaromatization of (E)-2-arylidene-3-cyclohexenones and primary amines

• Lu Li,
• Na Li,
• Xiao-Tian Mo,
• Ming-Wei Yuan,
• Lin Jiang and
• Ming-Long Yuan

Beilstein J. Org. Chem. 2024, 20, 1468–1475, doi:10.3762/bjoc.20.130

• reduction. This electrophilic aromatic substitution usually needs harsh reaction conditions, tedious synthetic procedures and sometimes encounters the trouble of separating positional isomers caused by orientation or steric effects of the pre-existed amino group on the aryl moiety. Nevertheless, anilines

Selectfluor and alcohol-mediated synthesis of bicyclic oxyfluorination compounds by Wagner–Meerwein rearrangement

• Ziya Dağalan,
• Muhammed Hanifi Çelikoğlu,
• Saffet Çelik,
• Ramazan Koçak and
• Bilal Nişancı

Beilstein J. Org. Chem. 2024, 20, 1462–1467, doi:10.3762/bjoc.20.129

• rearrangement using benzonorbornadiene and the chiral natural compound (+)-camphene as bicyclic alkenes, selectfluor as an electrophilic fluorine source, and water and various alcohols as nucleophile sources. The structure of bicyclic oxy- and alkoxyfluorine compounds was determined by NMR and QTOF-MS analyses

• alkenes. We previously developed a dihomohalogenation method using selectfluor as an oxidant [27]. Herein, we synthesized bicyclic oxy- and alkoxyfluorine compounds using selectflour as an electrophilic fluorination reagent, water and various alcohols as an nucleophile. Results and Discussion In this

• study, benzonorbornadiene (1a) and the chiral natural product (+)-camphene (1b) were used as bicyclic alkenes. Safe, easily soluble, easy to use, stable solid, reactive and commercial available selectfluor [18][27][28] was selected for electrophilic fluorination source. Water and various alcohols were

Predicting bond dissociation energies of cyclic hypervalent halogen reagents using DFT calculations and graph attention network model

• Yingbo Shao,
• Zhiyuan Ren,
• Zhihui Han,
• Li Chen,
• Yao Li and
• Xiao-Song Xue

Beilstein J. Org. Chem. 2024, 20, 1444–1452, doi:10.3762/bjoc.20.127

• hypervalent iodine(III) reagents has been developed [12][13][14][15][16][17] (Figure 1), including the well-known Zhdankin reagents [13] and Togni reagents [14]. These reagents are popularly used as electrophilic group transfer reagents [18][19] in a variety of reactions, such as C–H functionalization [20][21