Synthesis of fluoroalkenes and fluoroenynes via cross-coupling reactions using novel multihalogenated vinyl ethers

• Yukiko Karuo,
• Keita Hirata,
• Atsushi Tarui,
• Kazuyuki Sato,
• Kentaro Kawai and
• Masaaki Omote

Beilstein J. Org. Chem. 2024, 20, 2691–2703, doi:10.3762/bjoc.20.226

• First, we optimized the conditions of the Suzuki–Miyaura cross-coupling in reference to the report by Yang et al. (Table 1) [43]. Upon the treatment of multihalogenated vinyl ether 1a with phenylboronic acid 4a (1.3 equiv) and palladium diacetate (10 mol %) as a catalyst at 40 °C, Suzuki–Miyaura cross

• investigated using various boronic acids 4 and alkynes 5 in cross-coupling reactions using 1 (Table 3 and Table 4). p-Tolylboronic acid 4b provided 2b quantitatively, whereas m- and o-tolylboronic acids 4c and 4d produced 2c and 2d in low yields because the methyl group was positioned near the reaction site

• % yields (Table 3, entries 6–8). The reaction between 1a and 4j, which contains an electron-withdrawing nitro group, afforded 2j in 88% yield (Table 3, entry 9). Although p-hydroxyphenylboronic acid (4k) gave 2k in only 9% yield, m-aminophenylboronic acid (4l) provided 2l in high yield (Table 3, entries 10

Computational design for enantioselective CO₂ capture: asymmetric frustrated Lewis pairs in epoxide transformations

• Maxime Ferrer,
• Iñigo Iribarren,
• Tim Renningholtz,
• Ibon Alkorta and
• Cristina Trujillo

Beilstein J. Org. Chem. 2024, 20, 2668–2681, doi:10.3762/bjoc.20.224

• colleagues [1]. These compounds, which feature a Lewis acid (LA) and a Lewis base (LB), whose interaction is hindered by bulky substituents or chain strain, have garnered significant attention. Initially explored for their ability to trap small molecules [2][3], such as H2 [4], CO2 [5][6][7], N2O [8][9], and

• , depicted by the purple points in Figure 1B. Results and Discussion The following nomenclature will be used during the volcano plot analysis: FX_LBLA_S1_S2 where X is the label of the family (1, 2, 3, 5, or 6), LB is the Lewis base considered (N or P), LA is the Lewis acid (in this particular study only B

• results, we looked into the literature to explore examples of asymmetric FLPs. This exploration revealed three main types, namely, intramolecular chiral FLPs, intermolecular FLPs composed of a chiral acid and an achiral base, and intermolecular FLPs comprising an achiral acid and a chiral base [61][62

Transition-metal-free decarbonylation–oxidation of 3-arylbenzofuran-2(3H)-ones: access to 2-hydroxybenzophenones

• Bhaskar B. Dhotare,
• Seema V. Kanojia,
• Chahna K. Sakhiya,
• Amey Wadawale and
• Dibakar Goswami

Beilstein J. Org. Chem. 2024, 20, 2655–2667, doi:10.3762/bjoc.20.223

• mmol) and mandelic acid derivatives 2a–d (6 mmol) was stirred and heated to 50 °C under nitrogen atmosphere until the mixture turned into a viscous oil. The viscous oil/paste was further heated to 140 °C until the reaction was complete (cf. TLC). The mixture was then brought to room temperature and a

The scent gland composition of the Mangshan pit viper, Protobothrops mangshanensis

• Jonas Holste,
• Paul Weldon,
• Donald Boyer and
• Stefan Schulz

Beilstein J. Org. Chem. 2024, 20, 2644–2654, doi:10.3762/bjoc.20.222

• various lipid classes including sterols, triacylglycerols, and common fatty acid methyl esters [15]. Mass spectrometric analysis of the lipid content of crotalines, mainly the Western Diamondback Rattlesnake (C. atrox), confirmed the presence of cholesterol [3][6][11][16], fatty acids [11], fatty amides

• , Figure S1), confirming the acid functional group in the natural compounds. In support of these data, GC/IR analysis of Dm (Supporting Information File 1, Figure S2) showed strong carbonyl bands at 1741 cm−1 accompanied by two intermediate bands at 1198 cm−1 and 1177 cm−1, characteristic of ester valence

• gap between m/z 192 and 232 indicates a methyl group either at either C-5 or C-6. Taken together, the data from the derivatizations led to the conclusion that one methyl group is located at C-4 and a second at C-6. This is consistent with regular fatty acid biosynthesis of mid-chain methyl

Applications of microscopy and small angle scattering techniques for the characterisation of supramolecular gels

• Connor R. M. MacDonald and
• Emily R. Draper

Beilstein J. Org. Chem. 2024, 20, 2608–2634, doi:10.3762/bjoc.20.220

• structures formed by the self-assembly of amino acid-appended perylene bisimides (PBIs) [83]. They found that the average fibre length was a critical nanostructural feature for affording a desirable mechanoresponsive property, that is the change in conductivity under a bending force, in PBI films. Therefore

• was achieved by Firipis et al. where they used SAXS to quantify hydrogels formed from self-assembling bioactive peptides Fmoc-DIKVAV and Fmoc-FRGDF (D = aspartic acid, I = isoleucine, K = lysine, V = valine, A = alanine, F = phenylalanine, R = arginine, G = glycine) [88]. The physical characteristics

Efficient modification of peroxydisulfate oxidation reactions of nitrogen-containing heterocycles 6-methyluracil and pyridine

• Alfiya R. Gimadieva,
• Yuliya Z. Khazimullina,
• Aigiza A. Gilimkhanova and
• Akhat G. Mustafin

Beilstein J. Org. Chem. 2024, 20, 2599–2607, doi:10.3762/bjoc.20.219

• as 6-methyluracil (MU), 1,3,6-trimethyluracil (TMU), and pyridine (Py), and the results of the experiments are presented in this article. The hydroxy derivatives of MU and Py, obtained through oxidation followed by acid hydrolysis, possess compelling biological properties, rendering them practically

• 2 was no more than 15%. Subsequently, upon acid hydrolysis of compound 2, HMU (3) was produced. The addition of PcM to the reaction mixture resulted in a significant increase in the yield of compound 2 [13][22]. The catalysts were added in quantities ranging from 0.00001–0.1 wt %, with the amount of

• derivatives). Our study marks the first time pyridine has been involved in the peroxydisulfate oxidation reaction. The oxidation of pyridine (7) using APS resulted in a single product – pyridin-2-yl ammonium sulfate (8). Upon acid hydrolysis, this product yielded HPy (9, Scheme 2). The physicochemical and

Base-promoted cascade recyclization of allomaltol derivatives containing an amide fragment into substituted 3-(1-hydroxyethylidene)tetronic acids

• Andrey N. Komogortsev,
• Constantine V. Milyutin and
• Boris V. Lichitsky

Beilstein J. Org. Chem. 2024, 20, 2585–2591, doi:10.3762/bjoc.20.217

• purification. The synthetic utility of the prepared tetronic acids was demonstrated by further transformations at the hydroxyethylidene fragment. The structures of one obtained tetronic acid and one product of derivatization were confirmed by X-ray analysis. Keywords: allomaltol; base-promoted recyclization

• ; 1,1′-carbonyldiimidazole; 3-hydroxypyran-4-ones; tetronic acid; Introduction 3-Hydroxypyran-4-one derivatives are an important class of heterocyclic compounds widely represented in various naturally occurring sources [1][2][3][4]. Products of this type demonstrate a broad range of biological activity

• [5][6][7][8][9][10][11][12][13]. For example, 2-hydroxymethyl-5-hydroxypyran-4-one (kojic acid) is a well-known skin whitening agent extensively used in the cosmetic, medicine and food industries. The action of this compound is based on inhibition of tyrosinase activity, which helps to protect

Transition-metal-free synthesis of arylboronates via thermal generation of aryl radicals from triarylbismuthines in air

• Yuki Yamamoto,
• Yuki Konakazawa,
• Kohsuke Fujiwara and
• Akiya Ogawa

Beilstein J. Org. Chem. 2024, 20, 2577–2584, doi:10.3762/bjoc.20.216

• 2 in BTF (0.4 mL) at 80 °C in air successfully afforded phenylboronic acid pinacol ester 3a in 68% yield (Table 1, entry 1). In the presence of NaOMe as a base, the reaction did not proceed (Table 1, entry 2). Increasing or decreasing the amount of diboron 2 did not improve the yield of 3a (Table 1

A review of recent advances in electrochemical and photoelectrochemical late-stage functionalization classified by anodic oxidation, cathodic reduction, and paired electrolysis

• Nian Li,
• Ruzal Sitdikov,
• Ajit Prabhakar Kale,
• Joost Steverlynck,
• Bo Li and
• Magnus Rueping

Beilstein J. Org. Chem. 2024, 20, 2500–2566, doi:10.3762/bjoc.20.214

• , several structurally diverse aromatic acetals have been synthesized. Dehydroabietic and norcholanoic acid derivatives have been effectively modified using the developed protocol. The reaction is reported to involve the oxidation of the benzene core, followed by electron transfer to the radical cation, and

• . Subsequently, the generated intermediate 29 is oxidized at the anode, then attacked by the acid to obtain the final product (Scheme 10). C–H bond sulfur functionalization: The direct formation of the CS bond is an attractive way to prepare aryl sulfides. From this perspective, Wu and coworkers developed a

• then attacked by the nucleophilic amidosulfinate, which also functions as an electrolyte. The amidosulfinate is generated through the formation of a Lewis acid–base adduct. A subsequent oxidation step, accompanied by deprotonation, yields the sulfonamide product. SO2 captures the excess electrons via

Machine learning-guided strategies for reaction conditions design and optimization

• Lung-Yi Chen and
• Yi-Pei Li

Beilstein J. Org. Chem. 2024, 20, 2476–2492, doi:10.3762/bjoc.20.212

• acid–base salts, and continuous variables, such as temperature, pressure, substrate concentration, and residence time. Regression prediction models are then built for these reaction parameters and target objectives by collecting experimental data and conducting statistical analysis. Many reaction

HFIP as a versatile solvent in resorcin[n]arene synthesis

• Hormoz Khosravi,
• Valeria Stevens and
• Raúl Hernández Sánchez

Beilstein J. Org. Chem. 2024, 20, 2469–2475, doi:10.3762/bjoc.20.211

• tolerated. This method leads to a variety of 2-substituted resorcin[n]arenes in a single synthetic step with isolated yields up to 98%. Keywords: cavitand; cyclization; HFIP; hydroxyalkylation; resorcinarenes; Introduction The acid-catalyzed aldehyde-resorcinol condensation has been studied for more than

• molecular recognition [12][46]. Despite extensive research, challenges remain in the acid-catalyzed resorcin[n]arene synthesis, for example: 1) reaction times for simple resorcin[n]arenes starting from aliphatic aldehydes and resorcinol generally require multiple days and up to a week (Scheme 1a) [9][26]; 2

• as the catalyst (Table 1, entries 1–4). The removal of HCl from the reaction conditions unveiled the crucial role of the catalyst in the process (Table 1, entry 5), which was expected; however, note that here we use the acid in catalytic amounts and not in excess as reported in the literature [73][74

Photoredox-catalyzed intramolecular nucleophilic amidation of alkenes with β-lactams

• Valentina Giraldi,
• Giandomenico Magagnano,
• Daria Giacomini,
• Pier Giorgio Cozzi and
• Andrea Gualandi

Beilstein J. Org. Chem. 2024, 20, 2461–2468, doi:10.3762/bjoc.20.210

• carboaminations. However, photoredox catalysis could be applied to a suitable β-lactam intermediate decorated with an alkene moiety to achieve N–H addition and cyclization to the fused bicyclic system of clavams (Figure 2A). Clavulanic acid (1, Figure 2B) belongs to the family of clavam β-lactam compounds and is

• ][41][42][43]. The inhibitory activity of β-lactamases is exhibited by those congeners with a (3R,5R)-configuration, such as clavulanic acid (1), whereas clavams with other configurations are not lactamase inhibitors, although some of these have antifungal or antibacterial properties [35]. In the

• variants. A) Access of clavam derivatives by intramolecular photoredox reaction of alkenes. B) Clavulanic acid and its derivatives. C) Construction of the oxacepham scaffold by radical cyclization. Tentative mechanism for the photo-cyclization reaction. Preparation of alkenyl β-lactam derivatives for the

Hypervalent iodine-mediated cyclization of bishomoallylamides to prolinols

• Smaher E. Butt,
• Konrad Kepski,
• Jean-Marc Sotiropoulos and
• Wesley J. Moran

Beilstein J. Org. Chem. 2024, 20, 2455–2460, doi:10.3762/bjoc.20.209

• enantioselective conjugate addition to α,β-unsaturated pyroglutamic acid derivatives followed by deoxygenation [10], and the enantioselective organocatalytic reaction between 2-acylaminomalonates and α,β-unsaturated aldehydes [11][12]. The development of new synthetic methods using hypervalent iodine reagents has

• that the transition state was stabilized by 4.1 kcal·mol−1 by an extra molecule of trifluoroacetic acid. A similar stabilizing interaction was not identified in this case with 3a, despite significant effort, but it cannot be ruled out. The cyclization of 9 was shown to be possible by attack of the

Phenylseleno trifluoromethoxylation of alkenes

• Clément Delobel,
• Armen Panossian,
• Gilles Hanquet,
• Frédéric R. Leroux,
• Fabien Toulgoat and
• Thierry Billard

Beilstein J. Org. Chem. 2024, 20, 2434–2441, doi:10.3762/bjoc.20.207

• derivative 2k, and the estrone derivative 2l were also successfully bis-functionalized. Some products appeared to be sensitive during purification by chromatography on silica gel. Suspecting acid sensitivity, compound 2a was treated with trifluoroacetic acid to confirm this hypothesis (Scheme 3). The product

Facile preparation of fluorine-containing 2,3-epoxypropanoates and their epoxy ring-opening reactions with various nucleophiles

• Yutaro Miyashita,
• Sae Someya,
• Tomoko Kawasaki-Takasuka,
• Tomohiro Agou and
• Takashi Yamazaki

Beilstein J. Org. Chem. 2024, 20, 2421–2433, doi:10.3762/bjoc.20.206

• succeeded by the usual hydrogenolysis to furnish the carboxylic acid anti,syn-8a in 79% isolated yield and the lactone anti,syn-7b was recovered in 13% yield (Scheme 4) which was considered to be the reflection of the original composition of anti,syn-7a and -7b. The relative stereochemistry of anti,syn-8a

Homogeneous continuous flow nitration of O-methylisouronium sulfate and its optimization by kinetic modeling

• Jiapeng Guo,
• Weike Su and
• An Su

Beilstein J. Org. Chem. 2024, 20, 2408–2420, doi:10.3762/bjoc.20.205

• 10.3762/bjoc.20.205 Abstract Nitration of O-methylisouronium sulfate under mixed acid conditions gives O-methyl-N-nitroisourea, a key intermediate of neonicotinoid insecticides with high application value. The reaction is a fast and highly exothermic process with a high mass transfer resistance, making

• modeling of this reaction was performed based on the theory of NO2+ attack, with the activation energy and pre-exponential factor determined. Finally, based on the response surface generated by the kinetic model, the reaction was optimized with a conversion of 87.4% under a sulfuric acid mass fraction of

• effective and non-toxic neonicotinoid insecticides, such as dinotefuran and clothianidin [2][3][4]. Currently, the industrial production of O-methyl-N-nitroisourea usually involves the nitration of O-methylisouronium sulfate (IO) with a mixture of sulfuric acid (H2SO4) and nitric acid (HNO3) in a batch

Evaluating the halogen bonding strength of a iodoloisoxazolium(III) salt

• Dominik L. Reinhard,
• Anna Schmidt,
• Marc Sons,
• Julian Wolf,
• Elric Engelage and
• Stefan M. Huber

Beilstein J. Org. Chem. 2024, 20, 2401–2407, doi:10.3762/bjoc.20.204

• has been known since the end of the 19th century and their use as aryl-transfer reagents has been widely explored [1][2][3]. The application as Lewis acid catalysts, on the other hand, has only gained interest in the last ten years after a first report by Han and Liu in 2015 on their use as catalysts

• in a Mannich reaction [4]. In 2018, our group showed in a proof-of-principle study [5] that the Lewis acid catalysis by DAI salts is based on halogen bonding (XB), an interaction between a Lewis base (XB acceptor) and an electrophilic halogen atom in the Lewis acid (XB donor) [6][7][8][9][10]. In

Efficient one-step synthesis of diarylacetic acids by electrochemical direct carboxylation of diarylmethanol compounds in DMSO

• Hisanori Senboku and
• Mizuki Hayama

Beilstein J. Org. Chem. 2024, 20, 2392–2400, doi:10.3762/bjoc.20.203

• diarylacetic acids from diarylmethanol species and carbon dioxide without transformation of the hydroxy group into appropriate leaving groups, such as halides and esters including carbonates. Keywords: C(sp3)–O bond cleavage; diarylacetic acid; diarylmethanol; electrochemical reduction; fixation of carbon

• position [19]. Notably, when diphenylmethanol (1a) was used as substrate for electrochemical carboxylation in DMSO, the carboxylation efficiently proceeded to give diphenylacetic acid (2a) in high yield. In this paper, we focus on electrochemical carboxylation of diarylmethanol compounds 1 in DMSO and

• electrochemical and the second efficient example of diarylacetic acid 2 synthesis from diarylmethanol compounds 1 and carbon dioxide in one step. Results and Discussion Although we have previously obtained diphenylacetic acid (2a) in 81% yield by electrochemical carboxylation of diphenylmethanol (1a) [19

Synthesis, electrochemical properties, and antioxidant activity of sterically hindered catechols with 1,3,4-oxadiazole, 1,2,4-triazole, thiazole or pyridine fragments

• Daria A. Burmistrova,
• Andrey Galustyan,
• Nadezhda P. Pomortseva,
• Kristina D. Pashaeva,
• Maxim V. Arsenyev,
• Oleg P. Demidov,
• Mikhail A. Kiskin,
• Andrey I. Poddel’sky,
• Nadezhda T. Berberova and
• Ivan V. Smolyaninov

Beilstein J. Org. Chem. 2024, 20, 2378–2391, doi:10.3762/bjoc.20.202

• previously found that the reaction between 3,5-di-tert-butyl-6-methoxymethylcatechol and different functionalized thiols occurs via an acid-catalyzed mechanism and leads to corresponding thioethers with methylene linker [53][54]. Hybrid structures of this type are of particular interest from the point of

• –80%) (Scheme 1a). The reaction between 3,5-di-tert-butyl-6-methoxymethylcatechol and 2-mercapto-4-phenylthiazole or 3-nitropyridine-2-thiol occurs via an acid-catalyzed mechanism and leads to corresponding thioethers 4, 5 with methylene linker in a good yield (80% and 63%, correspondingly) (Scheme 1b

• was determined by the accumulation of a colored complex with thiobarbituric acid (TBARS) (Figure 9). A decrease in TBARS concentration was observed in the presence of all tested compounds which indicates their antioxidant effect during incubation time. At the initial stage (3 h), catechol thione 8

Asymmetric organocatalytic synthesis of chiral homoallylic amines

• Nikolay S. Kondratyev and
• Andrei V. Malkov

Beilstein J. Org. Chem. 2024, 20, 2349–2377, doi:10.3762/bjoc.20.201

• -geranyl and prenylboronic acids 14 with yields in the range of 60–94%. Z-Geranylboronic acid (14, R = prenyl) proved to be less reactive, while stereoselectivities remained high (Scheme 4). A modified procedure was developed for 3,4-dihydroisoquinolines 22, which necessitated the use of 40 mol % of 2-(2

• -pyridyl)phenol (23) as an activator, 3 equivalents of HFIP and a slightly different catalyst, 3,3’-bis(3,5-bis(trifluoromethyl)phenyl)-BINOL 21 at 20 mol % loading (Scheme 5). Interestingly, the reaction showed an opposite trend and worked better with Z-geranylboronic acid (14). The scope was tested over

• enantioselectivities were in the range of 82–97% and were lowest for the prenylation, and highest for Z-geranylboronic acid. The absolute configurations of the products were established by X-ray crystallography of the hydrochloride salts of the corresponding bromoindole and bromodihydroisoquinoline derivatives 20 and

Tandem diazotization/cyclization approach for the synthesis of a fused 1,2,3-triazinone-furazan/furoxan heterocyclic system

• Yuri A. Sidunets,
• Valeriya G. Melekhina and
• Leonid L. Fershtat

Beilstein J. Org. Chem. 2024, 20, 2342–2348, doi:10.3762/bjoc.20.200

• , furoxancarboxamides 2f–h bearing aliphatic substituents or amino acid residues also smoothly underwent the studied tandem protocol and the corresponding biheterocyclic compounds 1f–h were obtained in yields of 45–77%. After having developed a general method for the synthesis of target furoxanotriazinones 1a–h, we

• extended this approach to amides 5 containing a furazan ring that were obtained via the reaction of readily available 4-amino-3-furazancarboxylic acid 6 with various amines using 2-(1H-benzotriazole-1-yl)-1,1,3,3-tetramethylaminium tetrafluoroborate (TBTU) as a coupling reagent (Scheme 3; see Supporting

• found to be suitable for the preparation of a library of new biheterocyclic molecules bearing aromatic and aliphatic substituents as well as incorporating amino acid residues. The obtained furoxanotriazinones have demonstrated a moderate NO-releasing ability across a wide range of concentrations under

Improved deconvolution of natural products’ protein targets using diagnostic ions from chemical proteomics linkers

• Andreas Wiest and
• Pavel Kielkowski

Beilstein J. Org. Chem. 2024, 20, 2323–2341, doi:10.3762/bjoc.20.199

• probe–protein interaction in native conditions in living cells. Taken together, the linkers used in chemical proteomics workflows are applied broadly in many research areas including screening of fragment libraries, covalent modifiers, protein PTMs, protein–protein interactions, protein–nucleic acid

• and amino acid remain unknown. In contrast, the peptide-level identification is focused on the characterization of the actual probe-modified peptides. It might be more challenging as a larger protein amount to start with is necessary and the fragments of the probe-modified peptides may not be trivial

• conjugates may be carried out using desthiobiotin (DTB) as affinity tag instead of biotin [103][104]. The DTB-tag allows to elute probe–peptide–DTB conjugates from streptavidin beads using a mixture of water, organic solvent – typically acetonitrile (ACN) – and an acid such as formic acid. The desthiobiotin

Stereoselective mechanochemical synthesis of thiomalonate Michael adducts via iminium catalysis by chiral primary amines

• Michał Błauciak,
• Dominika Andrzejczyk,
• Błażej Dziuk and
• Rafał Kowalczyk

Beilstein J. Org. Chem. 2024, 20, 2313–2322, doi:10.3762/bjoc.20.198

• time of two days under a pressure of 0.8 GPa [23]. Less reactive benzyl malonates, which allow for the cleavage of a free carboxylic group without the need for harsh base- or acid-mediated conditions [24], undergo additions catalyzed by primary amines [19]. However, these transformations are hampered

• enhancing the reactivity of a relatively inert acceptor does not necessarily lead to increased reaction rates, involves the use of more reactive nucleophiles. In this context, varying the stabilization energy of carboxylic acid derivatives by switching from oxoesters to thioesters is the significant

• nucleophilic catalyst. Test reactions between cyclohexenone and thiomalonate 1 conducted in toluene at room temperature indicated the formation of the product with high conversions and efficiencies (Scheme 2). Application of epi-aminoquinine (AQ-1) in combination with 2-fluorobenzoic acid (system A) led to the

Hydrogen-bond activation enables aziridination of unactivated olefins with simple iminoiodinanes

• Phong Thai,
• Lauv Patel,
• Diyasha Manna and
• David C. Powers

Beilstein J. Org. Chem. 2024, 20, 2305–2312, doi:10.3762/bjoc.20.197

• catalysts or photochemical procedures have been developed to enable this transformation [7][8][9]. The reactivity of hypervalent iodine reagents can be enhanced via Lewis acid catalysis [10]. For example, PIDA becomes a stronger oxidant upon coordination of BF3·OEt2, enabling chemistry that was not

• available in the absence of Lewis acid activation (Scheme 1a) [11][12]. A variety of Lewis acid activators have been reported [13][14][15][16][17][18][19][20][21][22] in an array of group-transfer reactions, including trifluoromethylation, cyanation, and fluorination. Brønsted acid activation has also been

• center [26][27]. Despite the prevalence of acid-activation in promoting carbon [28], oxygen [29][30], sulfur [31], chlorine [32], and fluorine [33] transfer reactions of hypervalent iodine compounds, these strategies have not been applied to activation of iminoiodinanes for nitrene transfer chemistry. We

Catalysing (organo-)catalysis: Trends in the application of machine learning to enantioselective organocatalysis

• Stefan P. Schmid,
• Leon Schlosser,
• Frank Glorius and
• Kjell Jorner

Beilstein J. Org. Chem. 2024, 20, 2280–2304, doi:10.3762/bjoc.20.196

• physicochemical descriptors. A prominent early example are Hammett parameters, developed in 1937 [26][27], that relate substituent parameters to the equilibrium constant of the deprotonation of a substituted benzoic acid. The derived substituent parameters are used to gain insight into the mechanism of reactions

• [96] investigated a bromocyclization catalysed by a chiral phosphoric acid (CPA) and a DABCOnium brominating reagent (Figure 6). The authors calculated transition state conformer ensembles for several flexible DABCOnium systems and performed energy decomposition analysis to separate the interactions

• phase transfer catalyst and an arylboronic acid [97] (Figure 7). After a systematic data set design involving eight phosphoric acids and eight boronic acids, the authors observed breaks in linearity of the model of enantioinduction for some catalyst combinations. Further experiments, such as non-linear