Recent advances in synthetic approaches for bioactive cinnamic acid derivatives

• Betty A. Kustiana,
• Galuh Widiyarti and
• Teni Ernawati

Beilstein J. Org. Chem. 2025, 21, 1031–1086, doi:10.3762/bjoc.21.85

• multimetal-organic framework (M-MOF, M= Cu, Ni) which successfully catalyzed the one-pot cyclopropenone hydration/Chan–Lam coupling reaction of 309 and boronic acid 341 to give the corresponding ester 310 in good yield via the formation of acid 342 (Scheme 76B). Cyclopropenone was also subjected to non-metal

• -catalyzed ring-opening reactions, e.g., by using PPh3. For instance, Reddy and co-workers (2024) utilized PPh3 to catalyze the esterification of diphenylcyclopropenone (309) with a series of natural products of the coumarin family to give the corresponding esters 311, 343, and 344 in good yields via the

Pd-Catalyzed asymmetric allylic amination with isatin using a P,olefin-type chiral ligand with C–N bond axial chirality

• Natsume Akimoto,
• Kaho Takaya,
• Yoshio Kasashima,
• Kohei Watanabe,
• Yasushi Yoshida and
• Takashi Mino

Beilstein J. Org. Chem. 2025, 21, 1018–1023, doi:10.3762/bjoc.21.83

• palladium catalysts with amines as nucleophiles have been reported [14][15][16][17][18][19][20][21][22][23][24][25], there have been only a few reports on the N-substitution of isatin using asymmetric methods. Recently, Wolf’s group reported a transition-metal-catalyzed (Pd-catalyzed) asymmetric allylic

Silver(I) triflate-catalyzed post-Ugi synthesis of pyrazolodiazepines

• Muhammad Hasan,
• Anatoly A. Peshkov,
• Syed Anis Ali Shah,
• Andrey Belyaev,
• Chang-Keun Lim,
• Shunyi Wang and
• Vsevolod A. Peshkov

Beilstein J. Org. Chem. 2025, 21, 915–925, doi:10.3762/bjoc.21.74

• formation of the tricyclic triazolo[1,5-a][1,4]benzodiazepine scaffold 10 (Scheme 1b) [39]. Triple bond-containing Ugi adducts showed a great promise for the assembly of various seven-membered nitrogen-containing heterocyclic cores through transition-metal-catalyzed alkyne hydroarylations [40][41][42][43

Recent advances in controllable/divergent synthesis

• Jilei Cao,
• Leiyang Bai and
• Xuefeng Jiang

Beilstein J. Org. Chem. 2025, 21, 890–914, doi:10.3762/bjoc.21.73

• control The precise regulation of product selectivity represents a fundamental challenge in transition-metal-catalyzed organic transformations, with significant implications for complex molecule synthesis. In this context, ligand-modulated divergent catalysis has emerged as a paradigm-shifting strategy

Chitosan-supported CuI-catalyzed cascade reaction of 2-halobenzoic acids and amidines for the synthesis of quinazolinones

• Xuhong Zhao,
• Weishuang Li,
• Mengli Yang,
• Bojie Li,
• Yaoyao Zhang,
• Lizhen Huang and
• Lei Zhu

Beilstein J. Org. Chem. 2025, 21, 839–844, doi:10.3762/bjoc.21.67

• under optimized conditions (Scheme 4a). The recyclability of heterogeneous catalysts is a critical factor in assessing their practical utility in transition metal-catalyzed reactions. Therefore, the recyclability of CS@CuI was evaluated in the reaction of 2-iodobenzoic acid (1a) with 2a, as illustrated

Regioselective formal hydrocyanation of allenes: synthesis of β,γ-unsaturated nitriles with α-all-carbon quaternary centers

• Seeun Lim,
• Teresa Kim and
• Yunmi Lee

Beilstein J. Org. Chem. 2025, 21, 800–806, doi:10.3762/bjoc.21.63

• with diverse functional groups [12][13][14]. Consequently, the development of selective and predictable strategies for the introduction of cyano groups into quaternary carbon frameworks has become necessary in organic synthesis. The transition-metal-catalyzed hydrocyanation of carbon–carbon double

• -system configuration promotes selective functionalization, enabling the synthesis of various complex products through a single transformation [17][18][19]. Therefore, allenes have become versatile intermediates in numerous transition-metal-catalyzed reactions [20][21]. Despite extensive studies on the

New advances in asymmetric organocatalysis II

• Radovan Šebesta

Beilstein J. Org. Chem. 2025, 21, 766–769, doi:10.3762/bjoc.21.60

• already been described by Seebach et al. in 1982 [15]. From this perspective, organocatalysis is more than 100 years old, building on a long thread of illustrious past discoveries. Asymmetric organocatalysis is now considered one of the three main pillars of asymmetric catalysis, along with metal

• -catalyzed reactions and biocatalysis. In the past 25 years, organocatalysis has grown rapidly into a broad area of research, with industrial applications now being developed [16]. The usefulness of any idea or methodology is ultimately often measured by its applications. The robustness, reliability, as well

Recent advances in allylation of chiral secondary alkylcopper species

• Minjae Kim,
• Gwanggyun Kim,
• Doyoon Kim,
• Jun Hee Lee and
• Seung Hwan Cho

Beilstein J. Org. Chem. 2025, 21, 639–658, doi:10.3762/bjoc.21.51

• Abstract The transition-metal-catalyzed asymmetric allylic substitution represents a pivotal methodology in organic synthesis, providing remarkable versatility for complex molecule construction. Particularly, the generation and utilization of chiral secondary alkylcopper species have received considerable

• secondary organocopper; copper-mediated reaction; stereoselectivity; Introduction The transition-metal-catalyzed regio- and enantioselective allylic substitution represents a pivotal methodology in organic synthesis, providing remarkable versatility for complex molecule construction [1][2][3][4]. The

• significance of this transformation lies in its unique ability to efficiently create a stereogenic center while forming new carbon–carbon or carbon–heteroatom bonds (e.g., C–N, C–O, and C–S) with excellent selectivities. The field of metal-catalyzed allylic substitution has evolved significantly since its

Formaldehyde surrogates in multicomponent reactions

• Cecilia I. Attorresi,
• Javier A. Ramírez and
• Bernhard Westermann

Beilstein J. Org. Chem. 2025, 21, 564–595, doi:10.3762/bjoc.21.45

• compound and MMS, undergoes an aza-Diels–Alder cyclization with the alkyne, and after oxidation and aromatization steps generates quinoline II. Unfortunately, under these gentle and greener conditions, aliphatic alkynes remain unreacted, compared to the metal-catalyzed version developed by Xu et al. [37

• compound as no reaction is observed with aliphatic alkynes. Furthermore, the yields are between 50–80%, which are slightly lower than those under metal-catalyzed conditions. Nevertheless, these results open the door to further studies aimed at developing more efficient, non-catalyzed synthetic procedures

Dioxazolones as electrophilic amide sources in copper-catalyzed and -mediated transformations

• Seungmin Lee,
• Minsuk Kim,
• Hyewon Han and
• Jongwoo Son

Beilstein J. Org. Chem. 2025, 21, 200–216, doi:10.3762/bjoc.21.12

• potential bioactivity [70][71][72][73]. Despite the development of synthetic approaches for six-membered lactams, including transition-metal-catalyzed transformations, several limitations remain, particularly with regard to regioselectivity and asymmetric C–N bond formation, which are still limited. In 2023

Recent advances in electrochemical copper catalysis for modern organic synthesis

• Yemin Kim and
• Won Jun Jang

Beilstein J. Org. Chem. 2025, 21, 155–178, doi:10.3762/bjoc.21.9

• electrochemistry and copper catalysis for various organic transformations. Keywords: copper; electrochemistry; radical chemistry; single-electron transfer; sustainable catalysis; Introduction Transition-metal-catalyzed cross-coupling has emerged as an effective method for forming carbon–carbon (C–C) and carbon

• efficient and economical approach for molecular synthesis [40]. This strategy has been widely applied in synthetic chemistry, the pharmaceutical industry, and materials science. Over the past few decades, transition-metal-catalyzed C–H activation reactions have been widely developed. Late-stage C–H

• quinine as a chiral ligand under standard conditions, the chiral product was obtained with a high yield and 79% ee. Enantioselective C(sp3)–H functionalization is an attractive strategy for synthesizing chiral molecules. Significant progress has been achieved in transition-metal-catalyzed asymmetric C–H

Nickel-catalyzed cross-coupling of 2-fluorobenzofurans with arylboronic acids via aromatic C–F bond activation

• Takeshi Fujita,
• Haruna Yabuki,
• Ryutaro Morioka,
• Kohei Fuchibe and
• Junji Ichikawa

Beilstein J. Org. Chem. 2025, 21, 146–154, doi:10.3762/bjoc.21.8

• coupling reactions of aromatic C–F and C–Br bonds with arylboronic acids. Keywords: arylboronic acid; benzofuran; C–F bond activation; cross-coupling; nickel; Introduction The metal-catalyzed activation of aromatic carbon–fluorine (C–F) bonds is widely recognized as a challenging task in synthetic

Recent advances in organocatalytic atroposelective reactions

• Henrich Szabados and
• Radovan Šebesta

Beilstein J. Org. Chem. 2025, 21, 55–121, doi:10.3762/bjoc.21.6

• purities, solid yields and very good diastereomeric ratios. The hydroxy group present in products 156 and 158 could be transformed to provide axially chiral phosphines that could be utilized as chiral ligands in transition-metal-catalyzed reactions. Testing both substrates 156 and 158 for conformational

Intramolecular C–H arylation of pyridine derivatives with a palladium catalyst for the synthesis of multiply fused heteroaromatic compounds

• Yuki Nakanishi,
• Shoichi Sugita,
• Kentaro Okano and
• Atsunori Mori

Beilstein J. Org. Chem. 2024, 20, 3256–3262, doi:10.3762/bjoc.20.269

• ; phosphine ligand; pyridine amides; Introduction Transition-metal-catalyzed synthetic reactions have recently attracted much attention in synthetic organic chemistry [1][2]. C–H Arylation reactions catalyzed by a transition metal are of particular interest because these reactions involve rather superior

Multicomponent reactions driving the discovery and optimization of agents targeting central nervous system pathologies

• Lucía Campos-Prieto,
• Aitor García-Rey,
• Eddy Sotelo and
• Ana Mallo-Abreu

Beilstein J. Org. Chem. 2024, 20, 3151–3173, doi:10.3762/bjoc.20.261

• strategic approach allows precise control of the stereogenic centers at the C3-position during cyclization (Scheme 16). Ugi-4CR/metal-catalyzed reaction: The fusion of MCRs with cross-coupling reactions represents an attractive approach as a result of the increased intricacy and effectiveness [62]. Moreover

Cyclodextrin-based rotaxanes for polymer materials: challenge on simultaneous realization of inexpensive production and defined structures

• Yosuke Akae

Beilstein J. Org. Chem. 2024, 20, 3026–3049, doi:10.3762/bjoc.20.252

• substitution/addition reactions became the standard for end-capping reactions, although a transition metal–catalyzed cross-coupling reaction has also been used to synthesize CD-based rotaxane. Typically, water-soluble components are prepared, after which the Suzuki coupling reaction in water is used to

• into the polymer system, further modification and structural analyses were performed [48][74]. The axle end was easily modified by bromination of the benzene ring and successive transition metal–catalyzed cross-coupling reaction, such as Suzuki or Sonogashira coupling (Figure 10A). Furthermore, the

Advances in radical peroxidation with hydroperoxides

• Oleg V. Bityukov,
• Pavel Yu. Serdyuchenko,
• Andrey S. Kirillov,
• Gennady I. Nikishin,
• Vera A. Vil’ and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2024, 20, 2959–3006, doi:10.3762/bjoc.20.249

• mainly include: nucleophilic addition or nucleophilic substitution with H2O2 or ROOH [17][18], autoxidation with O2, pericyclic reactions of unsaturated bonds with O3 or O2, and metal-catalyzed peroxidation (Isayama–Mukaiyama hydrosilylperoxidation [19][20], for example) [21][22][23]. As the topic is

• broad, the present review mainly focused on radical and metal-catalyzed functionalization of C–H bonds or unsaturated bond with hydroperoxides (Scheme 2). The aim of this review is to cover recent studies in which alkylperoxy radicals have been used for the peroxidation of C(sp3) and C(sp2) sites

• product 32 formation is similar to the metal-catalyzed peroxidation described in Scheme 12 in the case of using the Cu(II)/TBHP oxidation system. Under metal-free conditions the tert-butoxy radical A is probably formed via homolytic thermal decomposition of TBHP. Recently, the electrochemical generation

Recent advances in transition-metal-free arylation reactions involving hypervalent iodine salts

• Ritu Mamgain,
• Kokila Sakthivel and
• Fateh V. Singh

Beilstein J. Org. Chem. 2024, 20, 2891–2920, doi:10.3762/bjoc.20.243

• overview of arylation of carbon and heteroatom substrates via diaryliodonium salts in metal-free conditions. This review emphasizes the significance and potential of DIASs in contemporary organic chemistry. Review C-Arylation Over the past decade, there has been a surge of interest in metal-catalyzed C

• -arylations utilizing diaryliodonium salts, marked by significant contributions, notably from research teams led by Sanford [53] and Gaunt [54]. The synthesis of carbon–carbon bonds through metal-free approaches serves as a valuable complement to transition-metal-catalyzed couplings. This is particularly

• N-arylation could be controlled by adjusting the steric and/or electronic properties of the diaryliodonium salt and the amide. This approach was helpful in the formation of O-arylimidates previously unattainable using metal-catalyzed methods. S-Arylation The aryl sulfide moiety is widely present in

C–H Trifluoromethylthiolation of aldehyde hydrazones

• Victor Levet,
• Balu Ramesh,
• Congyang Wang and
• Tatiana Besset

Beilstein J. Org. Chem. 2024, 20, 2883–2890, doi:10.3762/bjoc.20.242

• various transformations [54][55][56][57][58][59][60][61][62][63][64]. In consequence, a large number of transition-metal-catalyzed or radical-mediated processes for C–H functionalization of aldehyde hydrazones has flourished over the years. An ideal scenario for a direct and sustainable synthetic route

Copper-catalyzed yne-allylic substitutions: concept and recent developments

• Shuang Yang and
• Xinqiang Fang

Beilstein J. Org. Chem. 2024, 20, 2739–2775, doi:10.3762/bjoc.20.232

• expand the scope of transition metal-catalyzed substitution reactions. Since its discovery in 2022, copper-catalyzed yne-allylic substitution has undergone rapid development and significant progress has been made using the key copper vinyl allenylidene intermediates. This review summarizes the

• propargylic substitution and allylic substitution, but represents a new type of reaction mode, and greatly expands the scope of transition metal-catalyzed substitution reactions. Currently, yne-allylic substitutions affording 1,3- or 1,4-enynes, remote substitutions through dearomatization-rearomatization

5th International Symposium on Synthesis and Catalysis (ISySyCat2023)

• Anthony J. Burke and
• Elisabete P. Carreiro

Beilstein J. Org. Chem. 2024, 20, 2704–2707, doi:10.3762/bjoc.20.227

• performance. In their contribution “Metal-catalyzed coupling/carbonylative cyclizations for accessing dibenzodiazepinones: an expedient route to clozapine and other drugs”, Moutayakine and Burke described a new synthetic route for the synthesis of 10,11-dihydro-5H-dibenzo[b,e][1,4]diazepinone (DBDAP

Transition-metal-free synthesis of arylboronates via thermal generation of aryl radicals from triarylbismuthines in air

• Yuki Yamamoto,
• Yuki Konakazawa,
• Kohsuke Fujiwara and
• Akiya Ogawa

Beilstein J. Org. Chem. 2024, 20, 2577–2584, doi:10.3762/bjoc.20.216

• variety of transition-metal-catalyzed reactions and photoredox reactions using arylboronates as aryl sources have been energetically investigated for the construction of carbon–carbon or carbon–heteroatom bonds [12][13][14][15]. The preparation of arylboronates often requires pre-functionalized substrates

• with halogen or triflate groups. Recently, transition-metal-catalyzed direct borylation of arenes via C–H bond activation has been reported, although the design of the substrate and ligands is somewhat complicated [16][17][18][19][20][21][22]. Since the complete removal of catalyst-derived metal

• diborons can capture the in situ-generated carbon-centered radicals [28][29][30][31][32][33][34][35][36]. Among the aryl sources in organic synthesis, triarylbismuthines are shelf-stable and easy-to-handle reagents with appropriate reactivities in transition-metal-catalyzed reactions and radical reactions

A review of recent advances in electrochemical and photoelectrochemical late-stage functionalization classified by anodic oxidation, cathodic reduction, and paired electrolysis

• Nian Li,
• Ruzal Sitdikov,
• Ajit Prabhakar Kale,
• Joost Steverlynck,
• Bo Li and
• Magnus Rueping

Beilstein J. Org. Chem. 2024, 20, 2500–2566, doi:10.3762/bjoc.20.214

• [3]. Transition-metal-catalyzed LSF strategies have been well-established over the past decades. More recently, with the vigorous development of photochemistry and electrochemistry, numerous innovative reports on LSF using photo-, electro-, and photoelectrochemistry have emerged. These areas have

• pharmaceutical drugs and natural products. We classify these advancements into three types: anodic oxidation, cathodic reduction, and paired electrolysis (Figure 1). This review considers direct electrolysis (oxidation or reduction), mediator-induced electrolysis, and metal-catalyzed and photocatalyzed

• product (Scheme 15). The synthesis of aziridines can be achieved via the formation of nitrenes in either a metal-catalyzed or metal-free fashion. In this context, Wickens and colleagues presented a remarkable dication pool strategy for accessing N-alkylaziridines via metastable dicationic intermediates

gem-Difluorination of carbon–carbon triple bonds using Brønsted acid/Bu₄NBF₄ or electrogenerated acid

• Mizuki Yamaguchi,
• Hiroki Shimao,
• Kengo Hamasaki,
• Keiji Nishiwaki,
• Shigenori Kashimura and
• Kouichi Matsumoto

Beilstein J. Org. Chem. 2024, 20, 2261–2269, doi:10.3762/bjoc.20.194

• fluorobenziodoxole, are also utilized as F+ equivalents to introduce fluorine atoms into organic molecules. In addition, various trifluoromethylation reagents have been developed so far [5][6][7][8][9][10][11][12][13][14][15][16][17][18]. Transition-metal-catalyzed fluorination and trifluoromethylation methods have

Heterocycle-guided synthesis of m-hetarylanilines via three-component benzannulation

• Andrey R. Galeev,
• Maksim V. Dmitriev,
• Alexander S. Novikov and
• Andrey N. Maslivets

Beilstein J. Org. Chem. 2024, 20, 2208–2216, doi:10.3762/bjoc.20.188

• mainly via metal-catalyzed C–N or C–C bond formation. Despite recent advances in the area of remote C–H functionalization, this strategy still requires some pre-functionalization of the starting material or the use of directing groups [28][29][30][31][32]. An alternative strategy is based on aromatic