Access to optically active tetrafluoroethylenated amines based on [1,3]-proton shift reaction

• Yuta Kabumoto,
• Eiichiro Yoshimoto,
• Bing Xiaohuan,
• Masato Morita,
• Motohiro Yasui,
• Shigeyuki Yamada and
• Tsutomu Konno

Beilstein J. Org. Chem. 2024, 20, 2776–2783, doi:10.3762/bjoc.20.233

• ]. As a diastereoselective synthesis, reductive coupling reactions of commercially available 4-bromo-3,3,4,4-tetrafluoro-1-butene and glyceraldehyde 10a, its imine derivative 11, or Garner's aldehyde 10b have been reported [23][24]. Although the diastereoselectivities were low in some cases, the

Synthesis of spiroindolenines through a one-pot multistep process mediated by visible light

• Francesco Gambuti,
• Jacopo Pizzorno,
• Chiara Lambruschini,
• Renata Riva and
• Lisa Moni

Beilstein J. Org. Chem. 2024, 20, 2722–2731, doi:10.3762/bjoc.20.230

• product 6 was not observed. Instead, among the several side-products formed, we were able to isolate α-aminoamidine 7, as the result of a 3C Ugi-type reaction between an aldehyde obtained from an oxidation–hydrolysis process of compound 5, tert-butyl isocyanide and 2 equivalents of aniline, and the

5th International Symposium on Synthesis and Catalysis (ISySyCat2023)

• Anthony J. Burke and
• Elisabete P. Carreiro

Beilstein J. Org. Chem. 2024, 20, 2704–2707, doi:10.3762/bjoc.20.227

• a new family of isatin-based α-acetamide carboxamide oxindole hybrids using the versatile Ugi four-component reaction [18]. Sixteen hybrids were prepared by reacting 5-amino-1-benzyl-3,3-dimethoxyindolin-2-one, benzyl isocyanide, carboxylic acids, and aldehyde/ketone derivatives, catalyzed by ZnF2

Computational design for enantioselective CO₂ capture: asymmetric frustrated Lewis pairs in epoxide transformations

• Maxime Ferrer,
• Iñigo Iribarren,
• Tim Renningholtz,
• Ibon Alkorta and
• Cristina Trujillo

Beilstein J. Org. Chem. 2024, 20, 2668–2681, doi:10.3762/bjoc.20.224

• mechanism is followed by 40% of the catalysed reactions studied. Mechanism 2 (Figure 5B) contains an additional step. In this mechanism, the epoxide is first isomerised through TS14, resulting in the formation of the aldehyde (Min4). It can be observed that the opening of the epoxide is catalysed by the

• presence of the CO2 adduct. In the gas phase and isolated, the isomerisation of the epoxide exhibits a barrier of 52.6 kcal·mol−1. In the case of F2_NB_H_H, the barrier is reduced to 37.0 kcal·mol−1. CO2 later reacts with the aldehyde, forming the insertion product already observed in mechanism 1 (Min2

The scent gland composition of the Mangshan pit viper, Protobothrops mangshanensis

• Jonas Holste,
• Paul Weldon,
• Donald Boyer and
• Stefan Schulz

Beilstein J. Org. Chem. 2024, 20, 2644–2654, doi:10.3762/bjoc.20.222

• the resulting solution was stirred for 1 h at that temperature. Aldehyde 3 (105 mg, 0.7 mmol) was added at −10 °C and stirred for a further 18 h. The reaction mixture was diluted with pentane and filtered. After the removal of the solvent, the crude product was purified by column chromatography using

Synthesis and cytotoxicity studies of novel N-arylbenzo[h]quinazolin-2-amines

• Battini Veeraiah,
• Kishore Ramineni,
• Dabbugoddu Brahmaiah,
• Nangunoori Sampath Kumar,
• Hélène Solhi,
• Rémy Le Guevel,
• Chada Raji Reddy,
• Frédéric Justaud and
• René Grée

Beilstein J. Org. Chem. 2024, 20, 2592–2598, doi:10.3762/bjoc.20.218

• afforded the known aldehyde 2 in 65% yield [13]. Then, reaction with guanidinium carbonate in DMA at high temperature [12], gave the desired intermediate 2-aminobenzo[h]quinazoline (3). In a final step, classical Buchwald–Hartwig coupling [14][15][16][17] with bromobenzene under the conditions described

HFIP as a versatile solvent in resorcin[n]arene synthesis

• Hormoz Khosravi,
• Valeria Stevens and
• Raúl Hernández Sánchez

Beilstein J. Org. Chem. 2024, 20, 2469–2475, doi:10.3762/bjoc.20.211

• tolerated. This method leads to a variety of 2-substituted resorcin[n]arenes in a single synthetic step with isolated yields up to 98%. Keywords: cavitand; cyclization; HFIP; hydroxyalkylation; resorcinarenes; Introduction The acid-catalyzed aldehyde-resorcinol condensation has been studied for more than

• a century [1][2][3]. Decades of research culminated in the landmark paper by Niederl and Vogel [4], whose quantitative elementary analysis and molecular weight determinations led them to conclude that the most likely product of the aldehyde-resorcinol condensation was a four-fold species resulting

• presence of various aldehydes featuring different alkyl chains, all of which exhibited high isolated yields (Scheme 2, compounds 1a–e). Interestingly, literature reports commonly show lower yields as the aldehyde alkyl chain increases in length where commonly refluxing temperatures are required [9][74][76

Asymmetric organocatalytic synthesis of chiral homoallylic amines

• Nikolay S. Kondratyev and
• Andrei V. Malkov

Beilstein J. Org. Chem. 2024, 20, 2349–2377, doi:10.3762/bjoc.20.201

• (Scheme 6). The study explored a broad range of p-methoxyphenyl (PMP)imines derived from aryl, heteroaryl and alkyl aldehydes (including ethyl glyoxylate), demonstrating yields of 57–98% and high enantioselectivity of 90–98%. Screening of aldehyde and amine components indicated that the method is

• slightly more efficient with electron-poor substrates. On the other hand, high enantioselectivity was maintained over the aldehyde scope regardless of steric size and position of the substituents. A few years later, Wulff and co-workers [42] further elaborated the aza-Cope rearrangement methodology by

• crystal XRD of the corresponding hydrochloride salt. Microwave-induced one-pot asymmetric allylation of in situ-formed arylimines, catalysed by (R)-3,3’-diphenyl-BINOL. Aldehyde and amine scope [26]. aThe reaction was conventionally heated at 50 °C for 24 hours instead of microwave irradiation. b1.0 equiv

Deuterated reagents in multicomponent reactions to afford deuterium-labeled products

• Kevin Schofield,
• Shayna Maddern,
• Yueteng Zhang,
• Grace E. Mastin,
• Rachel Knight,
• Wei Wang,
• James Galligan and
• Christopher Hulme

Beilstein J. Org. Chem. 2024, 20, 2270–2279, doi:10.3762/bjoc.20.195

• aldehyde [10]. Latterly, Yamamoto utilized a 90% deuterated [D2]-isocyanide in a copper catalyzed [3 + 2] cycloaddition to afford a 60% deuterated [D2]-pyrrole [11]. The utility of the Leuckart–Wallach reaction towards the generation of isocyanides was first explored by Dömling [12], yet the use of such

• deuteration of formamide product while increasing formamide equivalents increases the yield at the cost of deuterated %. Excess reaction time increases side product formation and thermal degradation of the aldehyde starting material. To combat this, microwave irradiation was employed which dramatically

• Scheme 2 but is open to debate. Thus, formamide adds to the [D1]-aldehyde A to form hemiaminal B which eliminates D2O to give imine D. Deprotonation of formamide D forms the resonance and zwitterrion-stabilized isocyanate E [22]. We then hypothesize that zwitterion E rearranges with loss of CO2 to form

Synthesis and reactivity of the di(9-anthryl)methyl radical

• Tomohiko Nishiuchi,
• Kazuma Takahashi,
• Yuta Makihara and
• Takashi Kubo

Beilstein J. Org. Chem. 2024, 20, 2254–2260, doi:10.3762/bjoc.20.193

• dimerization in solution, the radical still remains even at 190 K due to the bulky nature of the two anthryl groups. Interestingly, upon exposure to air, the purple color of the radical solution quickly fades to orange, resulting in decomposition to give 9-anthryl aldehyde and anthroxyl radical derivatives

• radical. The unpaired electron is primarily located at the central sp2 carbon, a highly reactive site. The DAntM radical readily reacts with oxygen, leading to 1,2-dioxetane intermediate and decomposition to give anthryl aldehyde and a stable anthroxyl radical. Results and Discussion The synthetic route

• formation of a 1,2-dioxetane (DOT) intermediate and decomposition to aldehyde 1 and anthroxyl radical 5 via C–C and O–O bond cleavage. This reactivity is attributed to the predominant localization of an unpaired electron at the central sp2 carbon of the DAntM radical. These findings provide variable

Electrochemical allylations in a deep eutectic solvent

• Sophia Taylor and
• Scott T. Handy

Beilstein J. Org. Chem. 2024, 20, 2217–2224, doi:10.3762/bjoc.20.189

• constant current of 20 mA. With this promising start, several other aldehydes and two ketones were explored under the same reaction conditions (Table 2). A range of aromatic aldehydes worked well as well as one aliphatic aldehyde (Table 2, entry 13) and one alkenyl aldehyde (Table 2, entry 10), although

• , entries 5–7) did not result in carbonyl addition. The benzyl bromide was recovered intact, while for the other two, they are both sufficiently volatile that they would have been lost during the work-up. For all three, the aldehyde was recovered unreacted. While the use of DES as solvent and electrolyte

• the allylation product. Only in the case of the cyclohexanecarboxaldehyde (Table 6, entry 3) was the yield lower and in this case this lower yield was the result of incomplete conversion of the aldehyde. For as successful as the TBAB/EG conditions were, TBAB is not inexpensive. Choline chloride is

O,S,Se-containing Biginelli products based on cyclic β-ketosulfone and their postfunctionalization

• Kateryna V. Dil and
• Vitalii A. Palchykov

Beilstein J. Org. Chem. 2024, 20, 2143–2151, doi:10.3762/bjoc.20.184

• ) are the key methodology to access valuable heterocycles for medicinal chemistry projects. The classical Biginelli reaction (1893) is an acid-catalyzed, three-component reaction between an aldehyde, β-ketoester, and urea that produces 3,4-dihydropyrimidin-2(1H)-ones, also known as DHPMs (Scheme 1A

• -alkyl/aryl-substituted analogues, and aldehyde component switch to heteroaromatic (2-pyridinaldehyde) and aliphatic (iPrCHO, cinnamaldehyde). Unfortunately, we failed in both replacements and were unable to obtain any reasonable products. The list of unsuccessful reagents is shown in Figure S7 (see

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

• hydrolactite catalysts (C-Mg-Al HAT-3) [90]. With β-ketoesters, the method can be extended to a four-component synthesis. Initially, β-ketoesters react with hydrazine to form pyrazolones, while a Knoevenagel reaction between malononitrile and aldehyde simultaneously generates a Michael system. Both

Harnessing the versatility of hydrazones through electrosynthetic oxidative transformations

• Aurélie Claraz

Beilstein J. Org. Chem. 2024, 20, 1988–2004, doi:10.3762/bjoc.20.175

• readily available hydrazones under mild, safe and oxidant-free reaction conditions. This review presents a comprehensive overview of oxidative electrosynthetic transformations of hydrazones. It includes the construction of azacycles, the C(sp2)−H functionalization of aldehyde-derived hydrazones and the

• asymmetric preparation of chiral amines through the addition of nucleophilic partners [21][22] while the azaenamine character of some aldehyde-derived hydrazones has been demonstrated in the coupling with suitable electrophiles such as Michael acceptors [23][24]. Last but not least, the C=N bond of

• the electrochemical oxidative transformations of hydrazones. It is organized in four main parts: (i) synthesis of azacycles, (ii) synthesis of functionalized hydrazones through C(sp2)–H functionalization of aldehyde-derived hydrazones, (iii) access to diazo compounds, and (iv) synthesis of

Development of a flow photochemical process for a π-Lewis acidic metal-catalyzed cyclization/radical addition sequence: in situ-generated 2-benzopyrylium as photoredox catalyst and reactive intermediate

• Masahiro Terada,
• Zen Iwasaki,
• Ryohei Yazaki,
• Shigenobu Umemiya and
• Jun Kikuchi

Beilstein J. Org. Chem. 2024, 20, 1973–1980, doi:10.3762/bjoc.20.173

• time was extended from 2.5 min to 10 min), it did not exceed the yield of the batch reaction. In contrast, aldehyde 1n having a simple phenyl group gave product 3n in good yield (Table 3, entry 3: 72%). Because the yield of this flow reaction was better than that of the batch reaction (65%), the

• , respectively, in high yields (Table 3, entries 4 and 5). The aldehyde 1q bearing a strong electron-withdrawing trifluoromethyl group at the para-position gave product 3q in moderate yield (Table 3, entry 6: 63%), with the recovery of substrate 1q (18%). The reaction of ortho-methyl-substituted aldehyde 1r

The Groebke–Blackburn–Bienaymé reaction in its maturity: innovation and improvements since its 21st birthday (2019–2023)

• Cristina Martini,
• Muhammad Idham Darussalam Mardjan and
• Andrea Basso

Beilstein J. Org. Chem. 2024, 20, 1839–1879, doi:10.3762/bjoc.20.162

• significantly more active than 9, owing to higher rigidity and the correct position of the ortho H atoms in close proximity to the σ-holes on the I atom. The authors demonstrated that hydrogen bonding between H in ortho position of 8 and both O atom of aldehyde and N atom of imine significantly increased the

• the tolerability of a wide range of aldehydes, starting from one of the most used, benzaldehyde, passing through heteroaromatic and aliphatic structures with different substituents. In this context, some examples where the aldehyde functionality is incorporated into sugar derivatives, natural

• , the use of 5-HMF (23) [36], a renewable carbon source derived from biomass, responds to these requirements. This aldehyde displays additional functionalities useful for further modifications of the GBB adducts, but some optimization was necessary due to its intolerance to high temperatures and

A facile three-component route to powerful 5-aryldeazaalloxazine photocatalysts

• Ivana Weisheitelová,
• Radek Cibulka,
• Marek Sikorski and
• Tetiana Pavlovska

Beilstein J. Org. Chem. 2024, 20, 1831–1838, doi:10.3762/bjoc.20.161

• have been successfully synthesised through a one-pot, three-component reaction involving N,N-dimethylbarbituric acid, an aromatic aldehyde and aniline. By utilizing readily available reagents, this approach opens up the opportunity for the efficient formation of a variety of 5-aryldeazaalloxazines

• derivatives 2i–k, we changed the solvent to DMF/AlCl3, which increased the yields to 41–45%. However, the 7-methoxy derivative 2l with o-methyl substituent in the aldehyde moiety precipitated in DMSO after two days of reaction time. Interestingly, we observed only traces of another possible regioisomer 2m

• the described conditions. The halogen groups on the anilines slightly decreased their reactivity, leading to the formation of products 2q–w with lower yields. However, the 8-chlorine derivative 2u with a o-tolyl aldehyde moiety was prepared with a yield of 37%. Aromatic aldehydes bearing bromine and

Ugi bisamides based on pyrrolyl-β-chlorovinylaldehyde and their unusual transformations

• Alexander V. Tsygankov,
• Vladyslav O. Vereshchak,
• Tetiana O. Savluk,
• Serhiy M. Desenko,
• Valeriia V. Ananieva,
• Oleksandr V. Buravov,
• Yana I. Sakhno,
• Svitlana V. Shishkina and
• Valentyn A. Chebanov

Beilstein J. Org. Chem. 2024, 20, 1773–1784, doi:10.3762/bjoc.20.156

• . [15][18]. Further, the application of reagents with additional functional groups in the Ugi reaction makes it possible to further increase the complexity of the product structures, also due to possible post-transformation reactions. For example, if an unsaturated bond is present in the aldehyde

• presence of several alternative reaction centers in the structure of our substances, we sometimes encountered unexpected and intriguing results. Results and Discussion Synthesis of Ugi bisamides Four-component and three-component Ugi reactions The combination of pyrrole-containing α,β-unsaturated aldehyde

Chemo-enzymatic total synthesis: current approaches toward the integration of chemical and enzymatic transformations

• Ryo Tanifuji and
• Hiroki Oguri

Beilstein J. Org. Chem. 2024, 20, 1693–1712, doi:10.3762/bjoc.20.151

• biosynthetic intermediate 8 to its analogs 21, enabling the chemo-enzymatic total synthesis of 1. The chemical synthesis commenced with the preparation of two fragments and their subsequent coupling to assemble the core 5/8/5 tricyclic scaffold (Scheme 3A). The left-half fragment, aldehyde 14, was synthesized

• and subsequent oxidation yielded aldehyde 18, a precursor for the intramolecular ring closure of the eight-membered ring. Upon treatment of 18 with BF3·Et2O, diastereoselective Prins cyclization of 18 proceeded to generate secondary alcohol 19. Subsequent one-pot treatment with (n-Bu)4NF·HF resulted

• -terminus of SorbB catalyzes conversion of thioester 31 using NADPH to liberate aldehyde 32, and subsequent Knoevenagel condensation-type cyclization leads to sorbicillin (33). The FAD-dependent monooxygenase SorbC, utilized in the chemo-enzymatic total synthesis of 2, catalyzes the oxidative

Oxidation of benzylic alcohols to carbonyls using N-heterocyclic stabilized λ³-iodanes

• Thomas J. Kuczmera,
• Pim Puylaert and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2024, 20, 1677–1683, doi:10.3762/bjoc.20.149

• with common iodine(III) reagents by 1H NMR spectroscopy (Figure 4). After 60 h the measurements revealed a higher yield of aldehyde 4a using 1a (68%) compared to 1c (30%) under the influence of AlCl3. As a comparison, the use of PIDA (5b) and IBA (5c) with the additive resulted in a significantly lower

• (75%). The ortho-phenyl-substituted aldehyde 4h was isolated in 85% yield, while the ortho-methoxy substrate did not convert to 4i. The ortho-, meta- and para-permutation of a CF3 group showed lower reactivity for the ortho-substituted 4j (53%), while the meta- and para-derivatives 4k and 4l gave

• higher yields of 84% and 71%, respectively. The steric inhibition of a doubly substituted phenyl ring was observed in a diminished formation of 2,6-dichlorobenzaldehyde (4m) in 39% yield. Naphthalen-2-ylmethanol gave aldehyde 4n in 44% yield. Pyridines 4o and 4p were also compatible and gave good yields

Methyltransferases from RiPP pathways: shaping the landscape of natural product chemistry

• Maria-Paula Schröder,
• Isabel P.-M. Pfeiffer and
• Silja Mordhorst

Beilstein J. Org. Chem. 2024, 20, 1652–1670, doi:10.3762/bjoc.20.147

• [34]. In reductive amination, the substrate is usually an aldehyde or amine. After the formation of the iminium ion, it is reduced with the appropriate reagent to form the N-methylated amino acid. Different methods have been established using for example benzaldehyde as a protection group, sodium

• cyanoborohydride as a mild reducing agent, and paraformaldehyde as a methylating agent [36]. Methanol can be used as the methylating reagent in other methods. Here, a palladium on carbon (Pd/C) catalyst processes the dehydrogenation of the alcohol to form the corresponding aldehyde. The subsequently formed imine

New triazinephosphonate dopants for Nafion proton exchange membranes (PEM)

• Fátima C. Teixeira,
• António P. S. Teixeira and
• C. M. Rangel

Beilstein J. Org. Chem. 2024, 20, 1623–1634, doi:10.3762/bjoc.20.145

• phosphonation of the aldehyde group. To implement this strategy, a reaction between 4-hydroxybenzaldehyde (12) and cyanuric chloride (1) was performed, in toluene with Na2CO3 as base, to obtain compound 19 [58] in very good yield (87%) (Scheme 7). Compound 19 was subjected to similar reaction conditions that

Generation of multimillion chemical space based on the parallel Groebke–Blackburn–Bienaymé reaction

• Evgen V. Govor,
• Vasyl Naumchyk,
• Ihor Nestorak,
• Dmytro S. Radchenko,
• Dmytro Dudenko,
• Yurii S. Moroz,
• Olexiy D. Kachkovsky and
• Oleksandr O. Grygorenko

Beilstein J. Org. Chem. 2024, 20, 1604–1613, doi:10.3762/bjoc.20.143

• reaction is a three-component condensation of an α-amino heterocycle (e.g., 2-aminopyridine) 1, an aldehyde 2, and an isonitrile 3 providing the corresponding fused imidazoles (e.g., imidazo[1,2-a]pyridines) of general formula 4 (Scheme 1) [18][19][20][21]. Imidazo[1,2-a]pyridines and related heterocycles

• components of the reaction, the aldehyde and isonitrile, while the steric factor was found to be not significant. The protocol was used to prepare a 790-member compound library with 85% synthesis success rate. Furthermore, a readily available (REAL) chemical space comprising 271 Mln. members was generated

Benzylic C(sp³)–H fluorination

• Alexander P. Atkins,
• Alice C. Dean and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 1527–1547, doi:10.3762/bjoc.20.137

• was effective for the stereoselective fluorination of benzylic positions ortho to aldehyde substituents (Figure 9). The choice of a bulky amino, transient, directing group dictated the stereochemical outcome and promoted the C–F reductive elimination through an inner-sphere pathway. A competitive C–O

Challenge N- versus O-six-membered annulation: FeCl₃-catalyzed synthesis of heterocyclic N,O-aminals

• Giacomo Mari,
• Lucia De Crescentini,
• Gianfranco Favi,
• Fabio Mantellini,
• Diego Olivieri and
• Stefania Santeusanio

Beilstein J. Org. Chem. 2024, 20, 1412–1420, doi:10.3762/bjoc.20.123

• keto function of the hydrazone moiety and the open-chain hemiacetal or aldehyde hydrate in Brønsted acid medium to access 1H-imidazo[5,1-c][1,4]oxazine derivatives (Scheme 1) [21]. Considering that the hydrazone function at C-4 of 4a–r may exist in a tautomeric equilibrium with the corresponding ene

• (entries 1–7, Table 1). Similarly to what was observed by Yu and co-workers for the intramolecular cyclization of alkynyl aldehyde acetals [28][29], it was found that the use of FeCl3 provided the better result in terms of overall yield (entry 3, Table 1). Moreover, the choice of iron(III) seemed to have